Many emerging applications in microscale engineering rely on the fabrication of 3D architectures in inorganic materials. Small-scale additive manufacturing (AM) aspires to provide flexible and facile access to these geometries. Yet, the synthesis of device-grade inorganic materials is still a key challenge toward the implementation of AM in microfabrication. Here, a comprehensive overview of the microstructural and mechanical properties of metals fabricated by most state-of-the-art AM methods that offer a spatial resolution ≤10 μm is presented. Standardized sets of samples are studied by cross-sectional electron microscopy, nanoindentation, and microcompression. It is shown that current microscale AM techniques synthesize metals with a wide range of microstructures and elastic and plastic properties, including materials of dense and crystalline microstructure with excellent mechanical properties that compare well to those of thin-film nanocrystalline materials. The large variation in materials' performance can be related to the individual microstructure, which in turn is coupled to the various physico-chemical principles exploited by the different printing methods. The study provides practical guidelines for users of small-scale additive methods and establishes a baseline for the future optimization of the properties of printed metallic objects-a significant step toward the potential establishment of AM techniques in microfabrication.
In recent years, bulk metallic glasses (BMGs) have drawn much research attention and are shown to be of industrial interest due to their superior mechanical properties and resistance to corrosion. In spite of the interest in harnessing MG for microelectromechanical systems devices, there are limitations in manufacturing such micrometer‐scale structures. A novel approach for the fabrication of 3D MG structures using laser‐induced forward transfer (LIFT) is demonstrated. Inherent tremendous cooling rates associated with the metal LIFT process (≈1010 k s−1) make the formation of a variety of BMGs accessible, including also various binary compositions. In this work, it is demonstrated that LIFT printing of ZrPd‐based metallic glass microstructures can also be performed under ambient conditions. X‐ray diffraction analysis of the printed structures reveals > 95% of amorphous metal phase. Taking advantage of the properties of BMG, high quality printing of high aspect ratio BMG pillars, and microbridges are demonstrated. It is also shown how a composite, amorphous‐crystalline metal structure with a required configuration can be fabricated using multimaterial LIFT printing. The inherent high resolution of the method combined with the noncontact and multimaterial printing capacity makes LIFT a valuable additive manufacturing technique to produce metallic glass‐based devices.
Laser-induced forward transfer (LIFT) has been shown to be a useful technique for the manufacturing of micron-scale metal structures. LIFT is a high-resolution, non-contact digital printing method that can support the fabrication of complex shapes and multi-material structures in a single step under ambient conditions. However, LIFT printed metal structures often suffer from inferior mechanical, electrical, and thermal properties when compared to their bulk metal counterparts, and often are prone to enhanced chemical corrosion. This is due mostly to their non-compact structures, which have voids and inter-droplet delamination. In this paper, a theoretical framework together with experimental results of achievable compactness limits is presented for a variety of metals. It is demonstrated that compactness limits depend on material properties and jetting conditions. It is also shown how a specific choice of materials can yield compact structures, for example, when special alloys are chosen along with a suitable donor construct. The example of printed amorphous ZrPd is detailed. This study contributes to a better understanding of the limits of implementing LIFT for the fabrication of metal structures, and how to possibly overcome some of these limitations.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.