No abstract

Printed electronics is widely gaining much attention for compact and high-performance energy-storage devices because of the advancement of flexible electronics. The development of a low-cost current collector, selection, and utilization of the proper material deposition tool and improvement of the device energy density are major challenges for the existing flexible supercapacitors. In this paper, we have reported an inkjet-printed solid-state asymmetric supercapacitor on commercial A4 paper using a low-cost desktop printer (EPSON L130). The physical properties of all inks have been carefully optimized so that the developed inks are within the printable range, i.e., Fromm number of 4 < Z < 14 for all inks. The paper substrate is made conducting (sheet resistance ∼ 1.6 Ω/sq) by printing 40 layers of conducting graphene oxide (GO) ink on its surface. The developed conducting patterns on paper are further printed with a GO-MnO nanocomposite ink to make a positive electrode, and another such structure is printed with activated carbon ink to form a negative electrode. A combination of both of these electrodes is outlaid by fabricating an asymmetric supercapacitor. The assembled asymmetric supercapacitor with poly(vinyl alcohol) (PVA)-LiCl gel electrolyte shows a stable potential window of 0-2.0 V and exhibits outstanding flexibility, good cyclic stability, high rate capability, and high energy density. The fabricated paper-substrate-based flexible asymmetric supercapacitor also displays an excellent electrochemical performances, e.g., a maximum areal capacitance of 1.586 F/cm (1023 F/g) at a current density of 4 mA/cm, highest energy density of 22 mWh/cm at a power density of 0.099 W/cm, a capacity retention of 89.6% even after 9000 charge-discharge cycles, and a low charge-transfer resistance of 2.3 Ω. So, utilization of inkjet printing for the development of paper-based flexible electronics has a strong potential for embedding into the next generation low-cost, compact, and wearable energy-storage devices and other printed electronic applications.

No abstract

Silk cocoon membrane (SCM) is an insect engineered structure. We studied the electrical properties of mulberry (Bombyx mori) and non-mulberry (Tussar, Antheraea mylitta) SCM. When dry, SCM behaves like an insulator. On absorbing moisture, it generates electrical current, which is modulated by temperature. The current flowing across the SCM is possibly ionic and protonic in nature. We exploited the electrical properties of SCM to develop simple energy harvesting devices, which could operate low power electronic systems. Based on our findings, we propose that the temperature and humidity dependent electrical properties of the SCM could find applications in battery technology, bio-sensor, humidity sensor, steam engines and waste heat management.

Efficient capture of target analyte on biosensor platforms is a prerequisite for reliable and specific detection of pathogenic microorganisms in a microfluidic chip. Antibodies have been widely used as ligands; however, because of their occasional unsatisfactory performance, a search for alternative receptors is underway. Heat shock protein 60 (Hsp60), a eukaryotic mitochondrial chaperon protein is a receptor for Listeria adhesion protein (LAP) during Listeria monocytogenes infection. This paper reports application of biotinylated Hsp60 as a capture molecule for living (viable) L. monocytogenes in a microfluidic environment. Hsp60, immobilized on the surface of streptavidin-coated silicon dioxide exhibited specific capture of pathogenic Listeria against a background of other Listeria species, Salmonella, Escherichia, Bacillus, Pseudomonas, Serratia, Hafnia, Enterobacter, Citrobacter, and Lactobacillus. The capture efficiency of L. monocytogenes was 83 times greater than another Listeria receptor, the monoclonal antibody, mAb-C11E9. Additionally, the capture rate was further increased on a Hsp60-coated biochip by 60% when a dielectrophoresis force was applied for 5 min at the beginning of the final 1 h incubation step. Our data show that Hsp60 could be used for specific detection of L. monocytogenes on a biochip sensor platform.

Over the years, researchers have been working to mimic the nature by inducing superhydrophobic properties into a variety of material surfaces so that they exhibit non-wetting properties. Many diverse applications have been found in the fields, such as space and aerospace, defence, automotive, biomedical applications and engineering, sensors, apparels, and so on. Superhydrophobic surfaces repel water generally due to their surface texture or chemical properties. In this article, we focus on the functional applications of the superhydrophobic surfaces, and state-of-the-art fabrication technologies and processes, and the limitations of these processes to generate the superhydrophobic surfaces have been developed over the years.

Neurons and endocrine cells secrete neurotransmitter and hormones in discrete packets in a process called quantal exocytosis. Electrochemical microelectrodes can detect spikes in current resulting from the oxidation of individual quanta of transmitter only if the electrodes are small and directly adjacent to release sites on the cell. Here we report development of a microchip device that uses microfluidic traps to automatically target individual or small groups of cells to small electrochemical electrodes. Microfluidic channels and traps were fabricated by multi-step wet etch of a silicon wafer whereas Pt electrodes were patterned in register with the trap sites. We demonstrate high-resolution amperometric measurement of quantal exocytosis of catecholamines from chromaffin cells on the device. This reusable device is a step towards developing high-throughput lab-on-a-chip instruments for recording quantal exocytosis to increase the pace of basic neuroscience research and to enable screening of drugs that target exocytosis.

No abstract