Nano γAl2O3 has been one of the nanometal oxides that has improved the characteristics of biodiesel. The effect of γAl2O3 nanoparticles addition on premixed flame combustion is investigated with an experiment on the laminar flame speed of Calophyllum inophyllum methyl ester 30% and 70% petrodiesel mixtures, at atmospheric pressure and preheated temperature T = 473K. The γAl2O3 nanoparticles added to CIME30 biodiesel were 0ppm, 100ppm, 200ppm, and 300ppm. Experiments were carried out on a bunsen burner. The equivalent ratio of the mixture between ϕ = 0.67 to 1.17. Experiments revealed that the addition of nanoparticles to CIME30 biodiesel expands the flammability limit and increases the laminar flame speed. CIME30 without nanoparticles, flame stable between ϕ = 0,76 -1,17. CIME30 with nanoparticles, flame stable between ϕ = 0,67 -1,17. Combustion of CIME30 required a lot of air. The highest laminar flame speed occurred at the equivalent ratio ϕ = 0.83. The highest laminar flame speed of CIME30 0, 100, 200, and 300 ppm were 30.77, 34.50, 35.90, 38.45 cm/s respectively. The higher the nano γAl2O3 concentration the higher the laminar flame speed. This occurs due to the catalytic effect of γAl2O3 on biodiesel and its mixtures.
Nano particles of metal oxide developed as soluble nano additive in liquid fuels to improve fuel quality. One application of nano metal oxide particles is an additive to biodiesel. Biodiesel is an alternative fuel that can reduce dependence on fossil fuels. Pure biodiesel has a relatively lower calorific value compared to fossil fuels. Low calorific value results in increased brake specific fuel consumption. Moreover, biodiesel has a higher density and viscosity compared to fossil fuel. The content of carbon monoxide (CO), unburned hydrocarbons (HC) and nitrogen oxide (NOx) in exhaust gases with biodiesel is higher than fossil fuels. Metal oxide nanoparticles are added to biodiesel between 6 to 80 nm with concentrations about 50 to 500 ppm. Addition of metal oxide nanoparticles to biodiesel can improve brake thermal efficiency, reduce brake specific fuel consumption, carbon monoxide (CO), unburned hydrocarbons (HC), nitrogen oxide (NOx) and improve carbon dioxide (CO2) emission due to the catalytic effect of metal oxide nanoparticles. Metal oxide acts as an oxidation catalyst thereby reduce the carbon combustion activation temperature and thus enhances hydrocarbon oxidation, promoting complete combustion. Nanoparticles that are often used in various studies are nickel (II) oxide (NiO), cerium (IV) oxide (CeO2), titanium oxide (TiO2), zinc oxide (ZnO), aluminum oxide (Al2O3), and silicon dioxide (SiO2). This review paper describes the progress and development of nano metal oxide applications as additives for biodiesel, and the discussion in this paper is divided into 3 main topics, including the effects of nanoparticles on the properties of biodiesel, engine performance, and emission characteristics.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.