Ventricular Assist Devices are blood pumps used in patients with Congestive Heart Failure who are waiting for a heart transplant. They aim to assist the ventricle to pump out blood in physiological circulation by increasing aortic pressure and decreasing intraventricular pressure. The IFSP Laboratory of Bioengineering and Biomaterials (BIOENG) has been developing an Implantable Centrifugal Blood Pump called CARoL for mechanical circulatory support. The objective of this dissertation is to evaluate the changes in the crystallinity of the polymeric Pivot Bearings supporting the impeller of this pump when subjected to friction generated by rotation of zirconia oxide ceramic shafts. The adopted methodology consisted of submitting new and used samples of: a) bearings set made of polyamide 6; and b) the set made of poly-ether-ether-ketone. Those new and used samples were characterized by X-ray diffraction tests and Infrared Spectroscopy. The diffractograms and spectra obtained were compared to evaluate the bearing crystallinity, for both polymers before and after friction. The tests carried out showed diffractograms and similar spectra for the new and used samples, thus, there are indications that the friction generated by the rotation of the shafts did not change the crystallinity of the polymeric bearings supporting the pump rotor.
Com os atuais estudos de pesquisa e desenvolvimento em bomba de sangue, se faz necessário o conhecimento de novas perspectivas de materiais que garantam confiabilidade e durabilidade em relação à sua resistência ao desgaste. Este artigo tem como objetivo apresentar o desenvolvimento de ensaios e análises dos desgastes dos eixos em mancais, realizados em Dispositivo para Assistência Ventricular (DAV). Os materiais envolvidos são eixos em materiais cerâmicos de óxido de zircônio (ZrO2). Os testes foram realizados em um protótipo de DAV desenvolvido pelo Laboratório de Bioengenharia e Biomateriais do IFSP, as análises foram obtidas com um perfilômetro CCI MP Taylor Hobson em parceria com o Laboratório de Mecânica da Poli (USP). No corpo de prova não foi detectado nenhuma rugosidade superficial que interferisse no teste. Os eixos e mancais avaliados apresentaram resultados satisfatórios quanto ao desgaste observado no perfilômetro. Outras técnicas poderão ser utilizadas no futuro para garantir maior confiabilidade desses componentes da Bomba de Sangue Centrífuga Implantável.
O Laboratório de Bioengenharia e Biomateriais (BIOENG) do Instituto Federal de Educação, Ciência e Tecnologia de São Paulo (IFSP-SP) está desenvolvendo o projeto de uma Bomba de Sangue Centrifuga Implantável (BSCI) e estuda materiais para proporcionar maior durabilidade e confiabilidade em componentes de bombas de sangue, que realizam a Assistência Circulatória Mecânica em pacientes com Insuficiência Cardíaca Congestiva (ICC). O Polietileno de Ultra Alta Massa Molecular (PEUAMM) apresenta características importantes, devido à biocompatibilidade, acabamento superficial e alta resistência ao impacto e ao desgaste proveniente da configuração de sua estrutura polimérica e devido seu longo comprimento de cadeia. Componentes como eixos e mancais devem apresentar resistência ao desgaste e impacto, devido à solicitação de cargas mistas solicitadas durante o trabalho da BSCI. Os ensaios de desgastes e atrito foram realizados em corpos de prova de PEUAMM, em meio de água pura para evitar contaminação dos componentes, na Bancada de Ensaios de Atrito e Desgaste (BEAD) que foi desenvolvida pelo IFSP-SP. A utilização de análises gráficas devido à evolução no desenvolvimento de métodos matemáticos em equipamentos de caracterização possibilita a planificação gráfica em 3D da superfície do material e o gráfico de perfil do corpo de prova, após teste de desgaste na bancada. Foi realizada uma análise superficial com perfilômetro Taylor Hobson CCI para estudo do polímero utilizado nos componentes da BSCI. Foi observada no microscópio a formação de pistas na superfície dos corpos de prova sem redução de massa após ensaio na BEAD e a análise no Perfilômetro Taylor.
Quando nos propuseram escrever este editorial para a quarta edição da revista TASJ, ficamos diante de um desafio. Desde setembro de 2019, as expectativas estavam grandes para a realização do 5º MECF sob a presidência de uma mulher e com aspectos de internacionalização que o congresso, desde sua concepção, sonhou. Isso tudo iria se realizar em tão pouco tempo, apenas na quinta edição. Dentro destas expectativas, estavam as inscrições de um maior número de trabalhos segundo as prospecções de época. Entretanto, a pandemia global de Covid19 levou-nos rapidamente a uma reorganização em todos os aspectos. Por exemplo, no lugar da busca de garantias de espaços para a realização das sessões, nossa busca foi por garantir que o evento acontecesse de alguma forma. Neste sentido houve iniciativas muito interessantes e proveitosas como o Encontro Virtual de Iniciação Científica (EVIC) promovido pelo Instituto Federal de Educação, Ciência e Tecnologia de São Paulo – campus São Paulo (IFSP) e o Instituto Federal de Educação, Ciência e Tecnologia do Paraná – campus Foz do Iguaçu (IFPR) em junho de 2020. Mas o 5° MEC3F 2020, com todas as sonhadas melhorias, não aconteceu. Em um ano em que a ciência foi o assunto mais comentado, valorizado e divulgado de diferentes modos, as distâncias foram vencidas com a utilização de formatos remotos ou virtuais, podemos dizer que, de alguma forma, saímos fortalecidos nas relações humanas. Há que se destacar, também, que neste ano, um dos fundadores do congresso MEC3F está se aposentando (Prof. Sergio Yoshinobu Araki). Um homem inspirador que sempre foi e será impulsionador de ideias, honrado e apoiador de inciativas científicas ousadas e com um valor humano inconfundível. Sem ele, não alcançaríamos as metas do MEC3F com tanta rapidez. É um amigo inseparável! A seguir, apresentamos um breve relato pessoal do Prof. Araki: “Poxa, 42 anos dedicados ao ensino, não é pouco tempo, mas, foram muito bem vividos e aproveitados. O início de tudo, aos 21 anos, quando consegui um estágio em janeiro de 1978 na COFAP, para preparar material de apoio para treinamento dos funcionários, 30 dias após, por sorte, uma vaga apareceu e fui efetivado como instrutor de treinamento. A paixão pelo ensino foi imediata. Um ano após, por processo seletivo, já formado, mas no início da carreira em escola técnica, no Liceu de Artes e Ofícios de São Paulo, era janeiro de 1979, lecionando por 13 anos, com muitas saudades dos alunos e colegas professores, das gincanas organizadas por nossas orientadoras, ainda hoje mantenho contato com alunos formandos desta época. No mesmo período, início de 1983, tem o início das minhas atividades de professor na ETE Getúlio Vargas, lecionando também na ETE Lauro Gomes e ETE Jorge Street, onde conheci vários colegas professores que também lecionavam na Escola Técnica Federal, onde trabalhei por 18 anos. Em 1989, prestei o concurso da “federal” e acabei assumindo o cargo no final do mesmo ano, ficando por 30 anos e 8 meses como professor, nos cursos de Ensino Técnico Mecânica, Ensino Técnico Subsequente, Ensino Tecnológico e Engenharias, entrei no Regime de Dedicação Exclusiva e minha dedicação à escola foi completa, participei de vários projetos e comissões, fui coordenador de área, orientei vários alunos em projeto de IC, várias orientações de TCC, por muito tempo fui orientador de estágio. ...ahh não esquecendo das muitas viagens técnicas com os alunos de todos os cursos da nossa área, importante na minha vida e na vida dos alunos, sendo uma experiência de vida para todos, tendo sempre a companhia de colegas parceiros irmãos por um tempo precioso de pelo menos 10 anos, os Professores Eduardo Bock e Isac Fujita fiz várias amizades com alunos na qual mantenho contato, minha vida de docente foi muito feliz e prazerosa, alguns entraves, mas nada que me tirasse do rumo como professor. Agradeço a todos que, direta ou indiretamente, participaram da minha vida de docência, e espero estar presente na vida de alguns colegas e ex-alunos nesta nova etapa da minha vida. Estou e estarei sempre presente na vida de vocês que ainda de algum modo necessitarem da minha ajuda ou conversa em qualquer momento na vida de vocês”. Novos desafios, novas habilidades, novas fronteiras onde o homem jamais esteve! Juntos encontraremos respostas para o bem comum, através da ciência.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.