This study examined the anatomic location of the motor entry point (MEP) and branching point at the proximal and distal points of the tendon of the peroneal muscle by visual observation. Forty-three fresh legs of 25 adult bodies which had been donated to science were investigated in this study. The mean length of the reference line between the most proximal point of the head of the fibula (PHF) and the most distal point of the malleolus of the fibula (DMF) was 33.4 ± 2.5 cm. The MEPs of the peroneus longus (PL) and peroneus brevis (PB) gathered from 20 to 40% (7.0-13.0 cm) and 40 to 60%, respectively. The branching point where the nerve was divided to innervate the PL and PB was 10% and 28% from the PHF, respectively. These anatomic results suggest appropriate areas where to inject phenol or other agents for a MEP block in the case of a spastic lower extremity as well as guidelines for an electromyography conduction test.
An injection area of 50-60% on the reference line for the FHL and FHB is suggested.
This paper reports a morphometric study of the C2 laminae to provide quantitative anatomical data for safe crossing laminar screw placement. A valid trajectory is essential for C2 crossing laminar screw placement. Although several clinical technique notes and modifications to define a safe screw trajectory have been introduced in the recent years, no morphometric analysis has been performed to confirm the accuracy of screw trajectory using this technique. In this study, morphometric analysis was performed on 100 Korean C2 three-dimensional reconstruction CT images. The reconstructive C2 vertebrae from the post-edge of the spinal canal to the spinal process were divided into several zones, 1 mm each. Each zone was chosen as the entry point to imitate a crossing laminar screw (3.5 mm diameter) placement. In each 1-mm zoned trajectory, the screw pass ratio (PR), safe screw angle range (SAR) and maximum screw length (MSL) were measured and compared with the data from the other zoned trajectories. The zone '5-6 mm posterior to the post-edge of the spinal canal' was found to be a more feasible and safer entry point for guiding a crossing laminar screw placement than the other zones because this zone could provide a trajectory with maximal PR (85%), SAR (9.57 ± 4.368) and a larger MSL (21.74 ± 2.44 mm) than the other areas. The recommended safe screw angle in the axial plane is 49.68 ± 4.94 to 59.19 ± 4.708. However, the screw angle can vary considerably according to the individual variance. A preoperative evaluation of the screw trajectory is essential for safe screw placement using this technique.
A 50-year-old male presented with an extremely rare dorsal wall aneurysm of the internal carotid artery manifesting as intracerebral hemorrhage. Computed tomography demonstrated intracerebral hemorrhage on the frontal base. Magnetic resonance imaging clearly showed the hemorrhage was related to an aneurysm of the internal carotid artery. Cerebral angiography disclosed an elongated aneurysm of the dorsal wall of the internal carotid artery. The aneurysm was packed as fully as possible with Guglielmi detachable coils to achieve complete obliteration. The patient was discharged without neurological deficits. Dorsal internal carotid artery aneurysms have a high risk of premature rupture due to their unusual shape and position, adhesion to the brain tissue, and fragile neck. Direct clipping requires careful brain retraction, necessary exposure of the aneurysm, and gentle neck manipulation. Endovascular treatment is an alternative method for obliteration of the aneurysmal sac.
Introduction. This study aimed to improve the accuracy of manual needle placement into the trapezius (TM) for smooth shoulder line. Methods. For macroscopic study 12 TMs and for microscopic study 4 cadavers were detached and then sampled, 1⁎1 cm at the four points from the origin to insertion site (0% at the most lateral point of external occipital protuberance and 100% at the most lateral point of acromion). Results. Most of the nerve endings observed during macroscopic investigations were concentrated in the 60–80% region, and the second most distributed region was the 40–60% region. The microscopic results revealed that the 60–80% region on the reference line had the most dense neuromuscular junction area, while the 40–60% and 80–100% areas were similar in their neuromuscular junction densities. Discussion. These anatomical results will be useful in clinical settings especially for cosmetic surgeons.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.