Improving winter wheat water use efficiency in the North China Plain (NCP), China is essential in light of current irrigation water shortages. In this study, the AquaCrop model was used to calibrate, and validate winter wheat crop performance under various planting dates and irrigation application rates. All experiments were conducted at the Xiaotangshan experimental site in Beijing, China, during seasons of 2008/2009, 2009/2010, 2010/2011 and 2011/2012. This model was first calibrated using data from 2008/2009 and 2009/2010, and subsequently validated using data from 2010/2011 and 2011/2012. The results showed that the simulated canopy cover (CC), biomass yield (BY) and grain yield (GY) were consistent with the measured CC, BY and GY, with corresponding coefficients of determination (R2) of 0.93, 0.91 and 0.93, respectively. In addition, relationships between BY, GY and transpiration (T), (R2 = 0.57 and 0.71, respectively) was observed. These results suggest that frequent irrigation with a small amount of water significantly improved BY and GY. Collectively, these results indicate that the AquaCrop model can be used in the evaluation of various winter wheat irrigation strategies. The AquaCrop model predicted winter wheat CC, BY and GY with acceptable accuracy. Therefore, we concluded that AquaCrop is a useful decision-making tool for use in efforts to optimize wheat winter planting dates, and irrigation strategies.

No abstract

To connect renewable energy sources (RESs) with a unity-grid, energy storage (ES) systems are essential to eliminate the weather fluctuation effect, and high voltage direct current (HVDC) transmission is preferred for large-scale RESs power plants due to the merits of low cost and high efficiency. This paper proposes a multi-port bidirectional DC/DC converter consisting of multiple modules that can integrate ES system and HVDC transmission. Thanks to the adoption of three-port converters as submodules (SMs), ES devices, for example, batteries, can be decentralized into SMs and controlled directly by the SMs. Additionally, SMs are connected in a scalable matrix topology, presenting the advantages of flexible power flows, high voltage step-up ratios and low voltage/current ratings of components to satisfy the requirements of HVDC transmission. Furthermore, the control flexibility and fault tolerance capability are increased due to the matrix topology. In this paper, the analysis of the novel modular multi-port converter is introduced, and its functions are verified by the simulation results in PSIM.

In high voltage direct current (HVDC) power transmission of offshore wind power systems, DC/DC converters are applied to transfer power from wind generators to HVDC terminals, and they play a crucial role in providing a high voltage gain, high efficiency, and high fault tolerance. This paper introduces an innovative multi-port DC/DC converter with multiple modules connected in a scalable matrix configuration, presenting an ultra-high voltage step-up ratio and low voltage/current rating of components simultaneously. Additionally, thanks to the adoption of active clamping current-fed push-pull (CFPP) converters as sub-modules (SMs), soft-switching is obtained for all power switches, and the currents of series-connected CFPP converters are auto-balanced, which significantly reduce switching losses and control complexity. Furthermore, owing to the expandable matrix structure, the output voltage and power of a modular converter can be controlled by those of a single SM, or by adjusting the column and row numbers of the matrix. High control flexibility improves fault tolerance. Moreover, due to the flexible control, the proposed converter can transfer power directly from multiple ports to HVDC terminals without bus cable. In this paper, the design of the proposed converter is introduced, and its functions are illustrated by simulation results.