Abstract-In this paper we present detailed profiling results and identify the time critical algorithms of the Long Term Evolution (LTE) layer 2 (L2) protocol processing on an ARM based mobile hardware platform. Furthermore, we investigate the applicability of a single ARM processor combined with a traditional hardware acceleration concept for the significantly increased computational demands in LTE and future mobile devices. A virtual prototyping approach is adopted in order to simulate a state-of-the-art mobile phone platform which is based on an ARM1176 core. Moreover a physical layer and base station emulator is implemented that allows for protocol investigations on transport block level at different transmission conditions . By simulating LTE data rates of 100 Mbit/s and beyond, we measure the execution times in a protocol stack model which is compliant to 3GPP Rel.8 specifications and comprises the most processing intensive downlink (DL) part of the LTE L2 data plane. We show that the computing power of a single embedded processor at reasonable clock frequencies is not enough to cope with the L2 requirements of next generation mobile devices. Thereby, Robust Header Compression (ROHC) processing is identified as the major time critical software algorithm, demanding half of the entire L2 DL execution time. Finally, we illustrate that a conventional hardware acceleration approach for the encryption algorithms fails to offer the performance required by LTE and future mobile phones.

No abstract

In this paper, we present different acceleration concepts for the Robust Header Compression version 2 (ROHCv2) algorithms in Long Term Evolution (LTE) handsets. First, we explore the potential performance improvements and energy savings by adopting scratchpad memories at various sizes. Second, dedicated hardware accelerators with different data transfer modes are compared in terms of processing speed and energy efficiency on system level. By applying a virtual prototyping methodology with a proprietary filter module, we are able to investigate these two approaches within a state-of-the-art ARM based mobile phone platform at real software loads. Additionally, combined measurements of the execution time together with an estimation of the energy, that is consumed in the memory and the bus architecture, are performed. With reasonably dimensioned scratchpad memories (16 kB for instructions and data respectively), maximum speedups and energy savings both of approximately 60 % are achieved depending on the cache sizes in the embedded processor. Even better performance, especially in combination with big caches, is reached with a dedicated ROHCv2 hardware accelerator supporting the processing of several packets at once in a so called list mode. Compared to the pure software case, the execution time and the energy consumption are both improved by up to 80 % at small caches and still amount to more than 40 % and almost 30 % at big caches, respectively.

No abstract

No abstract

No abstract

No abstract

No abstract