Abstract-Path planning for autonomous vehicles in arbitrary environments requires a guarantee of safety, but this can be impractical to ensure in real-time when the vehicle is described with a high-fidelity model. To address this problem, this paper develops a method to perform trajectory design by considering a low-fidelity model that accounts for model mismatch. The presented method begins by computing a conservative Forward Reachable Set (FRS) of a high-fidelity model's trajectories produced when tracking trajectories of a low-fidelity model over a finite time horizon. At runtime, the vehicle intersects this FRS with obstacles in the environment to eliminate trajectories that can lead to a collision, then selects an optimal plan from the remaining safe set. By bounding the time for this set intersection and subsequent path selection, this paper proves a lower bound for the FRS time horizon and sensing horizon to guarantee safety. This method is demonstrated in simulation using a kinematic Dubin's car as the low-fidelity model and a dynamic unicycle as the highfidelity model.
To operate with limited sensor horizons in unpredictable environments, autonomous robots use a receding-horizon strategy to plan trajectories, wherein they execute a short plan while creating the next plan. However, creating safe, dynamically feasible trajectories in real time is challenging, and planners must ensure persistent feasibility, meaning a new trajectory is always available before the previous one has finished executing. Existing approaches make a tradeoff between model complexity and planning speed, which can require sacrificing guarantees of safety and dynamic feasibility. This work presents the Reachability-based Trajectory Design (RTD) method for trajectory planning. RTD begins with an offline forward reachable set (FRS) computation of a robot’s motion when tracking parameterized trajectories; the FRS provably bounds tracking error. At runtime, the FRS is used to map obstacles to parameterized trajectories, allowing RTD to select a safe trajectory at every planning iteration. RTD prescribes an obstacle representation to ensure that obstacle constraints can be created and evaluated in real time while maintaining safety. Persistent feasibility is achieved by prescribing a minimum sensor horizon and a minimum duration for the planned trajectories. A system decomposition approach is used to improve the tractability of computing the FRS, allowing RTD to create more complex plans at runtime. RTD is compared in simulation with rapidly-exploring random trees and nonlinear model-predictive control. RTD is also demonstrated in randomly crafted environments on two hardware platforms: a differential-drive Segway and a car-like Rover. The proposed method is safe and persistently feasible across thousands of simulations and dozens of real-world hardware demos.
Autonomous mobile robots must operate with limited sensor horizons in unpredictable environments. To do so, they use a receding-horizon strategy to plan trajectories, by executing a short plan while creating the next plan. However, creating safe, dynamically-feasible trajectories in real time is challenging; and, planners must ensure that they are persistently feasible, meaning that a new trajectory is always available before the previous one has finished executing. Existing approaches make a tradeoff between model complexity and planning speed, which can require sacrificing guarantees of safety and dynamic feasibility. This work presents the Reachability-based Trajectory Design (RTD) method for trajectory planning. RTD begins with an offline Forward Reachable Set (FRS) computation of a robot's motion while it tracks parameterized trajectories; the FRS also provably bounds tracking error. At runtime, the FRS is used to map obstacles to the space of parameterized trajectories, which allows RTD to select a safe trajectory at every planning iteration. RTD prescribes a method of representing obstacles to ensure that these constraints can be created and evaluated in real time while maintaining provable safety. Persistent feasibility is achieved by prescribing a minimum duration of planned trajectories, and a minimum sensor horizon. A system decomposition approach is used to increase the dimension of the parameterized trajectories in the FRS, allowing for RTD to create more complex plans at runtime. RTD is compared in simulation with Rapidly-exploring Random Trees (RRT) and Nonlinear Model-Predictive Control (NMPC). RTD is also demonstrated on two hardware platforms in randomly-crafted environments: a differential-drive Segway, and a car-like Rover. The proposed method is shown as safe and persistently feasible across thousands of simulations and dozens of hardware demos.
As autonomous robots increasingly become part of daily life, they will often encounter dynamic environments while only having limited information about their surroundings. Unfortunately, due to the possible presence of malicious dynamic actors, it is infeasible to develop an algorithm that can guarantee collision-free operation. Instead, one can attempt to design a control technique that guarantees the robot is not-at-fault in any collision. In the literature, making such guarantees in real time has been restricted to static environments or specific dynamic models. To ensure not-at-fault behavior, a robot must first correctly sense and predict the world around it within some sufficiently large sensor horizon (the prediction problem), then correctly control relative to the predictions (the control problem). This paper addresses the control problem by proposing Reachability-based Trajectory Design for Dynamic environments (RTD-D), which guarantees that a robot with an arbitrary nonlinear dynamic model correctly responds to predictions in arbitrary dynamic environments. RTD-D first computes a Forward Reachable Set (FRS) offline of the robot tracking parameterized desired trajectories that include fail-safe maneuvers. Then, for online receding-horizon planning, the method provides a way to discretize predictions of an arbitrary dynamic environment to enable real-time collision checking. The FRS is used to map these discretized predictions to trajectories that the robot can track while provably not-at-fault. One such trajectory is chosen at each iteration, or the robot executes the fail-safe maneuver from its previous trajectory which is guaranteed to be not at fault. RTD-D is shown to produce not-at-fault behavior over thousands of simulations and several real-world hardware demonstrations on two robots: a Segway, and a small electric vehicle.
Trajectory planning is challenging for autonomous cars since they operate in unpredictable environments with limited sensor horizons. To incorporate new information as it is sensed, planning is done in a loop, with the next plan being computed as the previous plan is executed. The recent Reachability-based Trajectory Design (RTD) is a provably safe, real-time algorithm for trajectory planning. RTD consists of an offline component, where a Forward Reachable Set (FRS) is computed for the vehicle tracking parameterized trajectories; and an online part, where the FRS is used to map obstacles to constraints for trajectory optimization in a provably-safe way. In the literature, RTD has only been applied to small mobile robots. The contribution of this work is applying RTD to a passenger vehicle in CarSim, with a full powertrain model, chassis and tire dynamics. RTD produces safe trajectory plans with the vehicle traveling up to 15 m/s on a two-lane road, with randomly-placed obstacles only known to the vehicle when detected within its sensor horizon. RTD is compared with a Nonlinear Model-Predictive Control (NMPC) and a Rapidlyexploring Random Tree (RRT) approach. The experiment demonstrates RTD's ability to plan safe trajectories in real time, in contrast to the existing state-of-the-art approaches.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.