Investigating the interactions of granular fertilizers with various types of equipment is an essential part of agricultural research. A numerical technique simulating the mechanical behavior of granular assemblies has the advantage of data trackings, such as the trajectories, velocities, and transient forces of the particles at any stage of the test. The interaction parameters were calibrated to simulate responses of granular fertilizers in EDEM, a discrete element method (DEM) software. Without a proper calibration of the interaction parameters between the granular fertilizers and various materials, the simulations may not represent the real behavior of the granular fertilizers. Therefore, in this study, a strategy is presented to identify and select a set of DEM input parameters of granular fertilizers using the central composite design (CCD) to establish the nonlinear relationship between the dynamic macroscopic granular fertilizer properties and the DEM parameters. The determined interaction properties can be used to simulate granular fertilizers in EDEM.
For sowing grain crops on stubble, stubble seeders with tine coulters are used, which perform technological operations in one pass. However, they do not meet the requirements of the agricultural machinery to ensure an even distribution of seeds in the sub-spear space. The subsoil no-drill planting creates the most favorable conditions for growth and development of cultivated crops and at the same time, grain crop yields are increased on average by 10…30%. Using no-drill planting, seeders equipped with spear coulters with spreaders for no-drill subsoil seeding provide the best quality and distribute the seeds evenly over the field. The article proposes the original design of the seed drill coulter for no-drill planting, which provides an even seed distribution over the feeding area. As a result of the theoretical researches the optimal parameters of the diffuser for the grain drill coulter are determined and the dependence between the unevenness on the test parameters of the diffuser and the height of the pendulum spreader, the base diameter are obtained. The purpose of this research is to develop the design and rationale of parameters of the grain drill for subsoil no-drill planting, the use of which will reduce the uneven distribution of grain crops seeds or mineral fertilizer granules.
The existing seeding devices not fully provide quality of application of mineral fertilizers. Unevenness and instability of application reach 20-40% at demanded to 15%. It, fi rst of all, associated with the absorption of fertilizers and imperfection of seeding devices for fertilizer. For a solution of the problem of ensuring quality of application of mineral fertilizers at their intra soil diff erentiated application the original design of the pin reel of a seeding device is off ered. Pins of the reel are executed in the form of the tetrahedral truncated pyramids located on crossing right and le multiple-helical lines on a reel surface. Theoretical researches relied on regularities of classical mechanics. As a result of theoretical researches the expression connecting all key design and technological parameters is received: reel radius, number of pins on it, their height and the sizes of the top and lower basis, diameter of a driving wheel, rate of application, aisle width, and transfer ratio of the driving mechanism.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.