No abstract

No abstract

Amaranth (Amaranthus caudatus), quinoa (Chenopodium quinoa) and kañiwa (Chenopodium pallidicaule) are pseudocereals regarded as good gluten-free sources of protein and fiber. A co-rotating twin screw extruder was used to obtain corn-based extrudates containing amaranth/quinoa/kañiwa (20% of solids). Box-Behnken experimental design with three independent variables was used: water content of mass (WCM, 15-19%), screw speed (SS, 200-500 rpm) and temperature of the die (TEM, 150-170 °C). Milled and whole samples were stored in open headspace vials at 11 and 76% relative humidity (RH) for a week before being sealed and stored for 9 weeks in the dark. Hexanal content was determined by using headspace gas chromatography. Extrudates containing amaranth presented the highest sectional expansion index (SEI) (p<0.01) while pure corn extrudates (control) presented the lowest SEI and greatest hardness (p<0.01). SEI increased with increasing SS and decreasing WCM. In storage, whole extrudates exposed to 76% RH presented the lowest formation of hexanal. This study proved that it was possible to increase SEI by adding amaranth, quinoa and kañiwa to pure corn flour. The evaluation of lipid oxidation suggested a remarkable stability of whole extrudates after exposure to high RH.

Centrifuging softwood extracts separated the hemicellulose-rich fraction and lignin-rich micro- and nanoparticles. The hemicellulose-rich fraction and lignin-rich nanoparticles formed stable emulsions.

Brewer's spent grain (BSG), a by-product of malting of barley in the production of malt extract, was used as an ingredient in extruded barley-based snacks in order to improve the nutritional value of the snacks and widen the applications of this by-product in food sector. The effects of the extrusion parameters on the selected properties of the snacks were studied. Snacks with different ingredients including whole grain barley flour, BSG, whey protein isolate (WPI), barley starch and waxy corn starch were produced in 5 separate trials using a co-rotating twin-screw extruder. Extrusion parameters were water content of the mass (17-23 %), screw speed (200-500 rpm) and temperature of the last section and die (110-150°C). Expansion, hardness and water content of the snacks were determined. Snacks containing barley flour and BSG (10 % of solids) had small expansion and high hardness. Addition of WPI (20 % of solids) increased expansion only slightly. Snacks with high expansion and small hardness were obtained when part of the barley flour was replaced with starch (barley or waxy corn). Yet, the highest expansion and the smallest hardness were achieved when barley flour was used with barley starch and WPI without BSG. Furthermore, expansion increased by increasing screw speed and decreasing water content of the mass in most of the trials. This study showed that BSG is a suitable material for extruded snacks rich in dietary fiber. Physical properties of the snacks could be improved by using barley or waxy corn starch and WPI.

No abstract

Summary Extrusion cooking is commonly used in the production of snacks. In the present study, extrudates were prepared using barley flour alone and with the addition of either polydextrose (PD) or whey protein isolate (WPI) and both PD and WPI. Independent process variables were water content of the mass (17%, 20% and 23%), screw speed (200, 350 and 500 rpm) and temperature of section 6 and die (110, 130 and 150 °C). Expansion, hardness, water content, porosity and chemical composition of the extrudates were analysed. Highly porous and expanded snack products with high dietary fibre and protein contents were obtained from barley flour and WPI when water content of mass was 17%, screw speed 500 rpm and temperature of section 6 and die 130 °C. Barley flour alone or with PD resulted in hard and non‐expanded extrudates. Expansion of extrudates was statistically significantly increased with decreasing water content of the mass and increasing screw speed in all trials.

Wood is an abundant and sustainable source of emerging food ingredients, namely hemicelluloses that fulfil a number of requirements for functional hydrocolloids. Hemicelluloses, especially spruce galactoglucomannans (GGM) and birch glucuronoxylans (GX), have potential to be used as stabilizers in various foods such as yogurts, beverages, dressings, and desserts. However, in addition to good technological functionality, safety, and low price, the applicability and market potential of new hydrocolloids is determined by their sensory properties. The present study reports, for the first time, the sensory profile of spruce GGM and birch GX in food. Sensory profiles from generic descriptive analysis of GGM- and GX-rich extracts, processed by spray drying or ethanol precipitation, were compared in three types of model food systems: water solutions, yogurt with solutions, and yogurt with emulsions stabilized by GGM or GX. Gum Arabic was included for comparison with a commercial ingredient known to have a mild flavor. The results showed that GGM and GX have a woody flavor, which can be reduced by ethanol precipitation and, in yogurt, masked by other food ingredients. Graphic abstract