RESUMO Dentre as espécies lenhosas da Caatinga, três podem ser destacadas devido a sua frequência e potencial de uso: Aroeira (Myracrodruon urundeuva Allemão), Pereiro (Aspidosperma pyrifolium Mart.) e Jurema de Embira (Mimosa ophthalmocentra Mart. ex Benth.). Diante disto, objetivou-se caracterizar e correlacionar as propriedades físicas destas madeiras provenientes de árvores de diferentes classes diamétricas. Nove indivíduos de cada espécie estudada foram coletados de acordo com seus diâmetros à altura do peito e suas amostras separadas em três categorias de classe diamétrica: de 5 a 7,5 cm; de 7,51 a 9,5 cm; e de 9,51 a 16 cm. Determinou-se a massa específica básica e os índices de contração volumétrico e lineares nos diferentes sentidos (tangencial, radial e longitudinal). As madeiras estudadas apresentaram propriedades físicas influenciadas tanto pela espécie quanto pela interação entre espécie e classe diamétrica, com exceção da contração tangencial, que foi influenciada apenas pela espécie. As classes diamétricas influenciaram somente as contrações radial e tangencial. As espécies apresentaram valores de coeficientes anisotrópicos que as classificam como de boa estabilidade, independentemente de suas classes diamétricas. Palavras-chaves: Myracrodruon urundeuva; Aspidosperma pyrifolium; Mimosa ophthalmocentra; massa específica básica; retratibilidade. Physical properties inter and intra species of Caatinga ABSTRACT A Among wood species of Caatinga, three can be pointed out due to their frequency and use potential: Aroeira (Myracrodruon urundeuva Allemão), Pereiro (Aspidosperma pyrifolium Mart.) and Jurema de Embira (Mimosa ophthalmocentra Mart. ex Benth.). Thus, this work aimed to characterize and correlate the physical properties of those wood species from trees of different diametric classes. Nine invidious from each studied species were collected according to their breast height diameter, and the specimens were separated into three category of diametric classes: from 5 to 7.5 cm; from 7.51 to 9.5 cm; and from 9.51 to 16 cm. Basic specific gravity and volumetric and linear (tangential, radial and longitudinal) shrinkage indexes were determined. The studied woods showed physical properties influenced by species and by the interaction between species and diametric classes, with exception of tangential shrinkage, that was influenced only by species. Only diametric classes difference was able to influence just radial and tangential shrinkage. The species showed an anisotropic coefficient value that can be classified as woods of good stability for all diametric classes.
A madeira de Jurema-preta (Mimosa tenuiflora (Willd.) Poiret) é amplamente comercializada na região Nordeste do país, mas nem sempre gera produtos com alto valor agregado devido a desinformação sobre seus potenciais. O objetivo deste trabalho foi avaliar a influência da variação longitudinal intra espécie na resistência natural ao ataque do fungo Ganoderma sp, causador da podridão branca, e na colorimetria da madeira. A espécie, independente da altura do tronco testada, demonstrou-se altamente resistente ao fungo em ensaio de laboratório. Porém, houve diferença entre a susceptibilidade da madeira do topo do tronco em relação as partes inferiores, da mesma forma que houve diferença na cor da madeira, que apresentou um tom menos avermelhado do que a da base. Essas diferenças se devem a maior presença de extrativos solúveis em acetona na madeira do cerne. Compostos polifenólicos possuem capacidade fungicida, afetam a tonalidade vermelha da madeira e são extraíveis com o solvente orgânico acetona.
A Jurema-preta (Mimosa tenuiflora (Willd.) Poiret) é uma espécie da Caatinga amplamente utilizada como lenha, porém possui potencial para fabricação de produtos de maior valor agregado, como exemplo, pisos de madeira sólida. O objetivo deste trabalho foi caracterizar longitudinalmente as propriedades físicas da madeira de M. tenuiflora para avaliar seus potenciais madeireiros. A massa específica básica de M. tenuiflora variou entre 0,97 e 0,77 g.cm-3 da base ao topo do fuste. Contudo, não houve variação entre índices de retrações, lineares ou volumétrica ao longo do fuste, sendo estes considerados baixos para a retração radial e volumétrica e médio para retração tangencial. O fator anisotrópico da madeira se manteve abaixo ou próximo ao limite de 1,5. A combinação destes fatores indicou que M. tenuiflora apresenta madeira pesada e dimensionalmente estável, o que a torna potencial matéria prima para produção de pisos.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.