Electric power-systems are one of the most important critical infrastructures. In recent years, they have been exposed to extreme stress due to the increasing demand, the introduction of distributed renewable energy sources, and the development of extensive interconnections. We investigate the phenomenon of abrupt breakdown of an electric power-system under two scenarios: load growth (mimicking the ever-increasing customer demand) and power fluctuations (mimicking the effects of renewable sources). Our results on real, realistic and synthetic networks indicate that increasing the system size causes breakdowns to become more abrupt; in fact, mapping the system to a solvable statistical-physics model indicates the occurrence of a first order transition in the large size limit. Such an enhancement for the systemic risk failures (black-outs) with increasing network size is an effect that should be considered in the current projects aiming to integrate national power-grids into “super-grids”.

Abstract-This paper presents a complex systems overview of a power grid network. In recent years, concerns about the robustness of the power grid have grown because of several cascading outages in different parts of the world. In this paper, cascading effect has been simulated on three different networks, the IEEE 300 bus test system, the IEEE 118 bus test system, and the WSCC 179 bus equivalent model. Power Degradation has been discussed as a measure to estimate the damage to the network, in terms of load loss and node loss. A network generator has been developed to generate graphs with characteristics similar to the IEEE standard networks and the generated graphs are then compared with the standard networks to show the effect of topology in determining the robustness of a power grid. Three mitigation strategies, Homogeneous Load Reduction, Targeted Range-Based Load Reduction, and Use of Distributed Renewable Sources in combination with Islanding, have been suggested. The Homogeneous Load Reduction is the simplest to implement but the Targeted Range-Based Load Reduction is the most effective strategy.

No abstract

Power grids are nowadays experiencing a transformation due to the introduction of Distributed Generation based on Renewable Sources. At difference with classical Distributed Generation, where local power sources mitigate anomalous user consumption peaks, Renewable Sources introduce in the grid intrinsically erratic power inputs. By introducing a simple schematic (but realistic) model for power grids with stochastic distributed generation, we study the effects of erratic sources on the robustness of several IEEE power grid test networks with up to 2 × 10 3 buses. We find that increasing the penetration of erratic sources causes the grid to fail with a sharp transition. We compare such results with the case of failures caused by the natural increasing power demand.

No abstract

We study the process of graphene growth on Cu and Ni substrates subjected to rapid heating (approximately 8 °C/s) and cooling cycles (approximately 10 °C/s) in a modified atmospheric pressure chemical vapor deposition furnace. Electron microscopy followed by Raman spectroscopy demonstrated successful synthesis of large-area few-layer graphene (FLG) films on both Cu and Ni substrates. The overall synthesis time was less than 30 min. Further, the as-synthesized films were directly utilized as anode material and their electrochemical behavior was studied in a lithium half-cell configuration. FLG on Cu (Cu-G) showed reduced lithium-intercalation capacity when compared with SLG, BLG and Bare-Cu suggesting its substrate protective nature (barrier to Li-ions). Although graphene films on Ni (Ni-G) showed better Li-cycling ability similar to that of other carbons suggesting that the presence of graphene edge planes (typical of Ni-G) is important in effective uptake and release of Li-ions in these materials.

No abstract

Our society nowadays is governed by complex networks, examples being the power grids, telecommunication networks, biological networks, and social networks. It has become of paramount importance to understand and characterize the dynamic events (e.g. failures) that might happen in these complex networks. For this reason, in this paper, we propose two measures to evaluate the vulnerability of complex networks in two different dynamic multiple failure scenarios: epidemic-like and cascading failures. Firstly, we present epidemic survivability (ES), a new network measure that describes the vulnerability of each node of a network under a specific epidemic intensity. Secondly, we propose cascading survivability (CS), which characterizes how potentially injurious a node is according to a cascading failure scenario. Then, we show that by using the distribution of values obtained from ES and CS it is possible to describe the vulnerability of a given network. We consider a set of 17 different complex networks to illustrate the suitability of our proposals. Lastly, results reveal that distinct types of complex networks might react differently under the same multiple failure scenario.