This paper starts with surveying the state-of-the-art knowledge of breaching flow slides, with an emphasis on the relevant fluid mechanics. The governing physical processes of breaching flow slides are explained. The paper highlights the important roles of the associated turbidity current and the frequent surficial slides in increasing the erosion rate of sediment. It also identifies the weaknesses of the current breaching erosion models. Then, the three-equation model of Parker et al. is utilised to describe the coupled processes of breaching and turbidity currents. For comparison’s sake, the existing breaching erosion models are considered: Breusers, Mastbergen and Van Den Berg, and Van Rhee. The sand erosion rate and hydrodynamics of the current vary substantially between the erosion models. Crucially, these erosion models do not account for the surficial slides, nor have they been validated due to the scarcity of data on the associated turbidity current. This paper motivates further experimental studies, including detailed flow measurements, to develop an advanced erosion model. This will improve the fidelity of numerical simulations.
Breaching flow slides are accompanied by the generation of turbidity currents. Measurements of these currents are critical for understanding the interaction between the turbidity current and the slope surface, as well as for the validation of numerical models. However, there are insufficient data available detailing the velocity distribution or sediment concentration in these currents. This paper presents experimental results of unique large-scale physical model experiments on breaching flow slides conducted at the water lab of Delft University of Technology, The Netherlands. The model tests were carried out in a tank with a subaqueous sandy slope steeper than the internal friction angle for that sand. We performed a series of novel experiments in which various nonvertical initial slope angles were tested, providing the first quantitative data for such initial conditions. Measurements of flow thickness, velocities, and sediment concentrations are obtained, providing the spatial and temporal evolution of the turbidity currents and the resulting underwater slope morphology. The experimental results reveal that the breaching-generated turbidity currents are self-accelerating and that they dominate the problem of breaching flow slides. We evaluated the theoretical expression for the erosion velocity in the case of pure beaching-where the turbidity current has no influence on the erosion-and it overestimated the observed erosion. The analysis of the failure evolution showed that the sand erosion rate increases due to the acceleration of the turbidity currents downslope, until a certain threshold, leading to the steepening of the breach face and thus the occurrence of surficial slides.
The interest in polymetallic nodule mining has considerably increased in the last few decades. This has been largely driven by population growth and the need to move towards a green future, which requires strategic raw materials. Deep-Sea Mining (DSM) is a potential source of such key materials. While harvesting the ore from the deep sea by a Polymetallic Nodule Mining Tool (PNMT), some bed sediment is unavoidably collected. Within the PNMT, the ore is separated from the sediment, and the remaining sediment–water mixture is discharged behind the PNMT, forming an environmental concern. This paper begins with surveying the state-of-the-art knowledge of the evolution of the discharge from a PNMT, in which the discharge characteristics and generation of turbidity currents are discussed. Moreover, the existing water entrainment theories and coefficients are analyzed. It is shown how plumes and jets can be classified using the flux balance approach. Following that, the models of Lee et al. (2013) and Parker et al. (1986) are combined and utilized to study the evolution of both the generated sediment plume and the subsequent turbidity current. The results showed that a smaller sediment flux at the impingement point, where the plume is transformed into a turbidity current, results in a shorter run-out distance of the turbidity current, consequently being more favorable from an environmental point of view.
As a result of the dilation of soil matrix, dense submarine sand slopes can temporarily be steeper than the natural angle of repose. These slopes gradually fail by the detachment of individual grains and intermittent collapses of small coherent sand wedges. The key question is whether steep disturbances in a submarine slope grow in size (destabilizing breaching) or gradually diminish (stabilizing breaching) and thereby limit the overall slope failure and resulting damage. The ability to predict whether the breaching failure is stabilizing or destabilizing is also crucial for the assessment of safety of submarine infrastructure and hydraulic structures located along rivers, lakes, and coasts. Through a set of large-scale laboratory experiments, we investigate the validity of an existing criterion to determine the failure mode of breaching (i.e., stabilizing or destabilizing). Both modes were observed in these experiments, providing a unique set of data for analysis. It is concluded that the existing method has limited forecasting power. This was quantified using the mean absolute percentage error, which was found to be 92%. The reasons behind this large discrepancy are discussed. Given the complexity of the underlying geotechnical and hydraulic processes, more advanced methodologies are required.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.