Al7075/10 wt% TiO 2 alloy composite has been fabricated by the stir casting method to investigate the influence of wear parameters. The microstructure of the produced composite was analyzed by scanning electronic microscopy. A pin-on-disc rig was used to carry out the wear test on produced composite under dry sliding conditions. The three wear control parameters such as load, sliding velocity and sliding distance were chosen to study the effects on the wear rate and coefficient of friction of composite. The experiments were planned as per L9 orthogonal array based on Taguchi's design of experiments. The signal-to-noise ratio and analysis of variance techniques were employed to determine the optimum combination of parameters and the significant contribution of each parameter on the responses. The results exposed that the load was the most predominant factor affecting the wear rate and coefficient of friction followed by the sliding distance and sliding velocity. Finally, the regression equations were developed to predict the responses. The worn surface morphology of composite noticed that TiO 2 reinforcement protects the matrix alloy from removal of material at all conditions. This investigation revealed that the wear resistance of the Al7075 alloy can be enhanced by the incorporation of TiO 2 particles.
The Friction stir processing benefits of aluminium composites contain advanced exploration in the region of aluminium alloy Friction Stir Welding - FSW. The modern advancements in Friction Stir Welding are concentrated on the optimization of welding parameters for multi response attributes. The investigations were carried out with the tool pin profiles, tool rotational speed and traverse speed as predictable process parameters for multi response optimization in Friction Stir Welding of 5052 aluminium alloy. GRG (grey relational grade) was obtained by the grey relational analysis of the friction stir welding process through different qualities, particularly, UTS-ultimate tensile strength and micro hardness. The significant process variables on GRG and most substantial parameters traverse speed and tool pin profiles are examined by ANOVA. Excluding tool rotational speed, tool pin profiles and traverse speed were likewise observed to be significant. To approve the investigation, verification of tests was completed at optimal parameters arrangement and predicted outcomes were observed to be in great concurrence with test values.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.