Об'єктом дослідження є технології отримання наповнених удароміцних композицій на основі поліпропілену для виготовлення деталей автомобілів. Головною проблемою є зниження міцності і технічних характеристик зі збільшенням кількості наповнювача в композиціях. Для вирішення цієї проблеми запропоновано введення модифікатору в кількості 5 % мас. до наповнених поліпропіленових композицій.Вивчено вплив наповнювача та модифікатора на реологічні та механічні властивості композицій на основі поліпропілену. Встановлено, що наявність концентрату кальциту як наповнювача та пропілен-октенового блокспівполімеру як модифікатора в композиції сприяє зниженню її в'язкості, що обумовлено переважним впливом емульгуючої дії стеарата кальцію над загущуючим ефектом мінерального наповнювача. Показано збільшення показника текучості розплаву в композиціях з 5 % пропілен-октенового блокспіволімеру, що пояснюється його пластифікуючою дією та хорошим суміщенням з поліпропіленом. Показано, що введення наповнювача до 10 % мас. підвищує ударну в'язкість у порівнянні з вихідним поліпропіленом. Подальше збільшення вмісту наповнювача до 20 % в композиціях знижує ударну в'язкість майже до значення для вихідного поліпропілену при некритичному зменшенні міцності при розриві. Показано, що наявність 5 % мас. модифікатора в композиціях підвищує значення відносного подовження.Визначено, що розроблені композиції з 5 % мас. модифікатора та з варіюванням кількості наповнювача можуть використовуватися для виробництва деталей автомобілів різного призначення без суттєвих змін технологічного циклу. Перевагою досліджених композицій є зменшення енерговитрат на переробку високонаповнених композицій. Впровадження розроблених технологій не вимагає додаткових капіталовкладень на переоснащення підприємства, оскільки розроблені композиції можуть перероблятись з використанням звичайного екструзійного обладнання.Ключові слова: поліпропілен, концентрат кальциту, пропілен-октеновий блокспівполімер, реологічні властивості, механічні властивості, ударна в'язкість, деталі автомобілів. Saitarly S.,
Вступ Одним із ефективних способів модифікування полімерів з метою поліпшення їхніх експлуатаційних характеристик є введення різноманітних наповнювачів [1-4]. Вплив дисперсних наповнювачів на фізико-механічні характеристики композитів значною мірою залежить від властивостей самих наповнювачів. Так, для поліпшення змочування поверхні наповнювачів та реологічних властивостей композицій поверхню частинок часто модифікують, обробляють стеариновою кислотою або іншими апретами за вмісту 0,5-4 % [5-6]. Якщо вміст наповнювача перевищує оптимальний, може спостерігатися погіршення показників, які визначають здатність до переробки певним технологічним
The effect of shungite on the structural and viscous-flow properties of compositions based on oligobutadiene was studied. The strength of coagulation structures of ebonite compositions filled with shungite was determined. The critical filling concentration was established and it is 40 wt.% of shungite per 100 wt.% of oligobutadiene. It was shown that increasing the temperature from 200C to 800C leads to a significant reduction in the shear stress required to destroy the structure of the composition. Temperature and shear rate independently affect the structured composition. Thus, it was shown that shungite powder can be used as a filler in liquid ebonite compositions based on oligobutadiene.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.