This article summarizes the outcome of research work carried out to improve the performance of the oxygen lance in the LD steelmaking process. It is stated that the lack of control of the foamy slag and the augmentation of interfacial area creation between the slag and metal are the major hindrances in running the process effectively for improved turn-down steel quality. The ineffectiveness of the existing design in producing liquid metal droplets in the presence of slag foam is explained. In order to augment the droplet generation, a new oxygen lance with a central subsonic nozzle through which flow can be controlled has been introduced and its blowing performances studied using numerical and water model studies. The jet characteristics studied in the numerical simulations show no jet coalescence. The interferences of the jets with the bath have further been analyzed by hydrodynamic model studies. It has been found that the droplet generation rate improves significantly due to the presence of the central jet. Further, it has been observed that controlling the flow rate through the central hole can be used as an effective process control tool.
Supplementary cementitious materials (SCM) have turned out to be a vital portion of extraordinary strength and performance concrete. Metakaolin (MK) is one of SCM material is acquired by calcinations of kaolinite. Universally utilised as pozzolanic material in concrete to enhance mechanical and durability properties. This study investigates the fresh and hardened properties of conventional concrete (CC) and self compacting concrete (SCC) by partially replacing cement with MK in diverse percentages. In CC and SCC, partial replacement of cement with MK varies from 5-20%. Fresh concrete properties of CC are conducted by slump test and compaction factor tests and for SCC, slump flow, T500, J-Ring, L-Box, V-Funnel and U-Box tests. Hardened concrete characteristics are investigated by compressive, split tensile and flexural strengths at age of 7, 28 and 90 days of curing under water. Carbonation depth, water absorption and density of MK based CC and SCC was also computed. Fresh concrete test results indicated that increase in MK replacement increases workability of concrete in a constant w/b ratio. Also, outcomes reveal that concrete integrating MK had greater compressive, flexural and split tensile strengths. Optimum replacement level of MK for cement was 10%, which increased mechanical properties and robustness properties of concrete.
The present work carried out an assessment of various methods for calculation of equilibrium slagmetal phosphorous partition for basic oxygen steelmaking in order to select the most acceptable procedure for estimation of the dephosphorisation capability of basic oxygen furnace (BOF) converters at Tata Steel. Equilibrium phosphorous partition was calculated by a thermodynamic approach proposed in the literature using the regular solution based quadratic formalism for slag, by semiempirical equations proposed by some investigators, as well as an optical basicity based correlation reported in literature. Turndown slag and metal composition and temperature data of a large number of BOF heats of LD-1 and LD-2 shops of Tata Steel, covering a period of several years, were employed for this purpose. Large discrepancies between the predictions of empirical correlations proposed by different investigators were found. On the basis of the assessment exercise, the correlation proposed by Turkdogan was accepted for further use and has been recommended for estimation of equilibrium slag-metal phosphorous partition for the BOF steelmaking at Tata Steel. The actual phosphorous partitions at the vessel turndown attained equilibrium only in few heats. Effectiveness of different bottom stirring systems adopted by Tata Steel over the years as well as that of post-stirring have been assessed on the basis of approach to equilibrium.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.