Zmiany składu chemicznego i izotopowego (inwersja) metanu, etanu i propanu na przykładzie gazów z formacji łupkowych Barnett (basen Fort Worth) oraz Fayetteville (basen Arkoma) W złożach gazu z formacji łupkowych w USA o najwyższej produktywności zazwyczaj występuje inwersja skła-du izotopowego węgla w metanie, etanie i propanie. Efekt roll-over polega na zmianie normalnego trendu izotopowego (δ. Przyczyny takiej inwersji nie zostały dokładnie określone; najczęstszym wytłumaczeniem jest występowanie wtórnego krakingu ropy naftowej w skale macierzystej typu łupkowego. zumberge wraz ze współpracownikami oznaczyli skład molekularny oraz izotopowy ponad 200 próbek gazów z formacji Barnett (basen Fort Worth) oraz Fayetteville (basen Arkoma). Dojrzałość termiczna tych basenów została określona na -odpowiednio -od około 1% do 2% oraz od około 2% do 3% w skali refleksyjności witrynitu. Wyniki analiz składu gazu z formacji Barnett i Fayetteville zostały wykorzystane w tej pracy do określenia różnic w interpretacji, jakie napotyka się, stosując wzory i wykresy opracowane dla gazów konwencjonalnych do scharakteryzowania gazów niekonwencjonalnych.Słowa kluczowe: shale gas, gaz z formacji łupkowych, skład chemiczny, skład izotopowy, δ 13 C, gaz ziemny. Methane, ethane and propane chemical and isotopic composition changes (inversion) in natural gases from Barnett and Fayetteville shale playsinversion of the isotopic composition of carbon in methane, ethane and propane is common in the highest productivity shale formations in the united States. Roll-over effect is the reversion of normal isotopic trend from δThe reasons for this inversion have not been clarified, but the most common explanation is the presence of secondary cracking of crude oil in shale source rock. zumberge and colleagues determined the molecular and isotopic composition of more than 200 samples of gas from the Barnett formation (Fort Worth basin) and Fayetteville formation (Arkoma basin). Thermal maturity of these basins was determined, respectively, from about 1 to 2%, and from about 2 to 3% vitrinite reflectance equivalent [9,10]. The results of these analyzes were used to determine the differences in gas interpretation with formulas and diagrams developed for the conventional gases when used for unconventional gases.
The reconstruction of a lithological profile based on geophysical logs of chemical composition provided by geochemical gamma-gamma well logging probes has been increasingly used for geophysical interpretation. A chemical profile, analogous to the measurements mentioned above, can be determined based on measurements made with a portable X-ray fluorescence spectrometer (pXRF). This paper presents a methodology for determining the mineral composition of drilled, clastic, as well as clay-rich rocks on the basis of both inexpensive and timesaving pXRF measurements as well as models combining the results of chemical composition analysis with results of mineral composition analysis (XRD). The results of chemical composition analysis obtained with a portable XRF spectrometer were calibrated based on a detailed analysis produced with ICP-OES and ICP-MS methods. A significant advantage of the proposed method is the possibility to apply it with regard to drill cuttings as well as archival cores. However, considerable discrepancies in the results obtained were identified while comparing the results of chemical composition analysed directly on the core and milled material. The analysed material comprised Carboniferous rocks derived from three boreholes located in Poland: Kobylin-1 as well as Biesiekierz-1 and -2. It was possible to directly compare the lithological profile obtained based on measurements taken on drill cuttings with the results of the lithological interpretation of a geochemical probe log.
Charakterystyka pojemności wymiany kationowej CEC skał ilastych o różnym stopniu diagenezyCelem pracy jest charakterystyka skał ilastych fliszu karpackiego pod względem zdolności do pęcznienia, wykonana na podstawie analizy własności fizykochemicznych (CEC) i analizy mineralogicznej. Przebadano skały fliszowe reprezentujące całe spektrum stopnia illityzacji: od 10 do 94% pakietów smektytowych w minerale mieszanopakietowym illit-smektyt. Dysponowanie tak szeroką bazą danych umożliwiło kompleksową charakterystykę badanych skał oraz powiązanie zdolności jonowymiennych z ilością i rodzajem materiału ilastego.Słowa kluczowe: pojemność wymiany kationowej, pęcznienie iłów, minerał mieszanopakietowy illit-smektyt. Characterization of the cation exchange capacity of clay rocks of varying degrees of diagenesisThe aim of the presented work was the characterization of the Carpathian Flysch rocks swelling capacity based on the analysis of their physicochemical (CEC) and mineralogical properties. Flysch sediments representing the whole range of illitization: from 10% to 94% of smectite layers in the mixed layered mineral illite-smectite were investigated. Such a broad database enabled comprehensive characterization of the investigated rocks swelling properties and relating the cation exchange capacity to the amount and type of clay minerals.Key words: cation exchange capacity, swelling of clays, the mixed layered mineral illite-smectite.Pojemność wymiany kationowej jest bardzo istotnym parametrem wykorzystywanym w badaniach skał osadowych. Pozwala na określenie zdolności skał do pęcznienia, wytrzymałości mechanicznej, zdolności sorbcyjnych, ułatwia przewidywanie możliwości reakcji przewiercanych skał z płuczką wiertniczą i prognozowanie uszkodzeń strefy przyodwiertowej. Parametr ten jest wskaźnikiem własności elektrycznych skał i znajduje zastosowanie w modelach wykorzystywanych do oceny nasycenia wodą na podstawie profilowań geofizycznych, takich jak model Waxmana-Smitha i Dual-Water. Zdolność wymiany kationowej skał jest ściśle związana z rodzajem i ilością minerałów ilastych charakteryzujących się dużą powierzchnią właściwą. Na wartość parametru CEC wpływają sumaryczna zawartość iłów oraz ich zdolności do pęcznienia, określone w większości skał silikoklastycznych przez zawartość pakietów smektytowych w minerale mieszanopakietowym illit-smektyt [6,9].Celem pracy była charakterystyka skał ilastych fliszu karpackiego pod względem ich zdolności do pęcznienia, wykonana na podstawie kompleksowej analizy porównawczej własności fizykochemicznych (CEC) i analizy mineralogicznej. Dysponowanie szeroką bazą danych (duża ilość próbek o zróżnicowanych wartościach CEC), obejmującą cały zakres pomiarowy, umożliwiło przeprowadzenie badań metodycznych pod kątem doboru stężenia roztworu wzorcowego w pomiarach pojemności wymiany kationowej. Wstęp MetodykaW ramach przedstawionej pracy wykonano pomiary pojemności wymiany kationowej CEC oraz ilościowego składu mineralnego skał ilastych o zróżnicowanych zdolnościach jonowymiennych, zawierających ...
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.