The creation of an information system to support the testing of armament and military (special) equipment is aimed at improving the efficiency of the test organization. This is possible due to the operational information support of all test processes, establishing information communication between departments of the organization, improving the quality of test estimations, reducing time for manual work and, accordingly, increasing the capacity of the test organization, automation of organizational management processes. The authors cover the approaches to the design and practical implementation of the information system for supporting the testing of armament and military (special) equipment. The issue of detailed description of the information content of the regulatory-reference database of the information system is considered. Based on the analysis of the processes that take place at different stages of testing specimens of armament and military equipment, the needs for thematic information are determined. The authors propose structural and functional schemes of information interaction of the components of the regulatory-reference database and the main software modules, which are offered for use in the information system to support tests. As a result of aggregation of the developed structural and functional schemes the generalized information structure of regulatory-reference database is offered. Possible ways to fill the database are determined. Based on the defined components of the database it is possible to perform further information-logical designing of the information system to support the testing, development of the components structure of the regulatory- reference database and their normalization. It is expected that the proposed information content of the regulatory- reference database will help increase the efficiency of the planning and testing of specimens of armament and military equipment, improve the quality of test results and reduce time expenditures.
Today, the problem of ensuring the effectiveness of the system of testing weapons and military equipment remains relevant. According to the existing national legislation and the accepted standards, separate specialized institutions are involved in the testing of samples of armaments and military equipment. One of the methods of improving the efficiency of test centers and institutions is the automation of all processes that accompany the testing of samples of weapons, military equipment and special equipment. The article highlights the approaches to the design and practical implementation of the information system to support the testing of weapons and military equipment. Its possible functional composition is considered. It is assumed that the information system should automate all processes in the test facility that are somehow related to the tests.Based on the analysis of existing guidance documents and scientific and technical information sources, the composition of the main functional components of the information system of test support is proposed. The necessity of introducing a management component into the information system for the implementation of a targeted approach to the management of a testing facility is substantiated. Reclassification of tasks of information databases on stages of carrying out tests is done. Based on the generalized scheme of testing the conceptual model of information system of support of tests is offered.The approximate composition of individual software modules and the content of databases are given.The expediency of using a spiral model of software design for the development of a comprehensive full-featured information system for test support is substantiated. It is expected that the automation of planning, conducting and other processes that accompany the tests can significantly affect the overall efficiency of the organization and conduct of tests, ensure the proper quality of the results and help reduce time losses for testing.
Корнієнко І.В., Корнієнко С.П. Чернігівський національний технологічний університет Походенко О.М., Казначей С.М., Руденко О.В. Державний науково-дослідний інститут випробувань і сертифікації озброєння та військової техніки ГРАФІЧНЕ ПРЕДСТАВЛЕННЯ МОДЕЛІ ФУНКЦІОНУВАННЯ ВИПРОБУВАЛЬНОЇ ОРГАНІЗАЦІЇ У статі розглянута проблема управління ефективністю функціонування випробувальної організації. Запропоновано графічну модель системи масового обслуговування (СМО) випробувальної організації у різних варіаціях обслуговування потоку заявок. Акцентовано увагу на відмінностях запропонованої моделі від традиційних СМО. Зроблені припущення щодо закономірностей вхідного потоку та параметрів обслуговування СМО, а також окреслені завдання на подальші дослідження тематики. Ключові слова: випробувальна організація, система масового обслуговування, ефективність функціонування.Актуальність. Функціонування будь-якої випробувальної організації пов'язане перш за все з систематичним, чітким та безвідмовним виконанням випробувань з визначення якості, властивостей та характеристик конкретної продукції. Успіх цього завдання залежить від багатьох факторів, основними серед яких є достатність у забезпеченні фахівцями, відповідного випробувального обладнання та устаткування. При забезпеченні цієї умови та умови стаціонарності потоку надходжень зразків для випробувань, ефективність управління діяльністю випробувальної організації полягає у ретельному плануванні випробувань та раціональному розподіленні ресурсів (сил та засобів для випробування).Проте, іноді можуть траплятися випадки, які можуть чинити негативний вплив на процес проведення випробувань. Наприклад, коливання інтенсивності вхідного потоку зразків для випробувань, що на практиці пояснюється зростом або занепадом науковотехнічного сектору, пожвавленням або спадом економіки, нагальною потребою держави у певних галузевих видах продукції, технологічним проривом у конкретному секторі економіки тощо, призведуть до простою або перевантаження випробувальної організації. Результатом цього є перевитрати на утримання організації або затримка у створенні продукції і, як наслідок, певна втрата її конкурентоспроможності. Окрім вхідного потоку зразків для випробувань, чималий вплив на успішність діяльності випробувальної організації чинить сам процес випробувань, якій може прискорюватись або гальмуватись незалежно від внутрішніх чинників. І, нарешті, різнорідність і різноплановість зразків продукції, які надходять на випробування, потребуватимуть застосування оптимізаційних методів планування для зменшення втрат з простою випробувального процесу.З цього виникає задача управління ефективністю функціонування випробувальної організації. Формальна постановка такого завдання, на наш погляд, може мати наступну форму.Постановка завдання. Є випробувальна організація, що виконує завдання з проведення випробувань і сертифікації широкого спектру технічних та інших засобів, які за їх функціональним призначенням можна класифікувати на декілька окремих груп (класів). Випробування можуть проводитись на різних стаді...
Today, the problem of reducing the cost of resources and time during planning and conducting tests remains relevant. This problem is especially acute in qualified testing agencies, where testing prototypes at different stages of the life cycle is the main functional task. Automation of planning processes and optimization of testing processes will significantly reduce such costs and improve the overall quality of testing. The article considers the theoretical issues of forming quantitative plans for testing samples of armaments and military equipment (AME) in obtaining zonal estimates of stochastic parameters and characteristics. The need for zonal estimates arises to confirm the quality of the sample for a given stochastic characteristic in the range from the allowable probabilistic value to the maximum (minimum) possible. The authors propose an approach to obtaining zonal estimates of the parameters of the armament and military equipment test sample, which theoretically meet the requirements of a given accuracy and reliability. The approach is based on the use of a flexible test plan, which is terminated when statistical confirmation of the probabilistic value not worse than specified by the developer is obtained. Ensuring the quality of evaluation is carried out by virtue of the minimum required number of repetitions of the experiment and the balance of the number of successful to the total number of experiments. It is shown that a flexible test plan can significantly reduce the total number of experiments, which will to some extent reduce the resource and time costs of testing samples of armament and military equipment. For the practical application of the approach of obtaining zonal estimates of the AME sample quality, its formalization and algorithmics is required. It is assumed that the developed approach will be implemented in the form of a functional module as а part of the subsystem of automated planning and quality management of AME sample tests.
One of the important areas of support and development of the state's defense capabilities is to equip the armed forces with modern armament and military equipment (AME). In recent years, due to the situation in eastern Ukraine, there has been a significant increase in the pace of development and adoption of the newest models of AME. The process of harmonizing national standards with NATO standards also contributes to this. Naturally, it causes an increase in the need for timely and high-quality testing of AME samples. Accordingly, the task of improving the efficiency of all processes that accompany the testing of defense products is urgent. The article considers the problem of practical development of information system for support of tests of AME, the purpose of which is to automate information processes in the preparation and conduct of tests, which should reduce time and labor costs at all stages of testing. Based on the previously substantiated spiral model of software product development and the concept of building an information system for test support, a step-by-step plan for the implementation of the information system is proposed. The system of requirements to the prototype of the information system with limited functionality is formulated, according to which the rating estimation of need and possibility of prioritized realization of the basic functional modules of the information system is carried out. Based on the requirement of functional connectivity of the modules, the information system composition on the next turn of the life cycle spiral model is substantiated. The step-by-step approach during creation and provisioning of databases and data registers with information are considered. As the information system develops, the transition to an incremental model of software product development is not excluded. It is expected that the automation of information processes related to the planning and conducting of tests, as well as the processing of test results and preparation of reporting documentation can positively impact the overall efficiency of the organization and conducting of tests, as well as ensure the proper quality of results.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.