We discovered for the first time that light can twist metal to control the chirality of metal nanostructures (hereafter, chiral metal nanoneedles). The helicity of optical vortices is transferred to the constituent elements of the irradiated material (mostly melted material), resulting in the formation of chiral metal nanoneedles. The chirality of these nanoneedles could be controlled by just changing the sign of the helicity of the optical vortex. The tip curvature of these chiral nanoneedles was measured to be <40 nm, which is less than 1/25th of the laser wavelength (1064 nm). Such chiral metal nanoneedles will enable us to selectively distinguish the chirality and optical activity of molecules and chemical composites on a nanoscale and they will provide chiral selectivity for nanoscale imaging systems (e.g., atomic force microscopes), chemical reactions on plasmonic nanostructures, and planar metamaterials.
We discovered that chiral nanoneedles fabricated by vortex laser ablation can be used to visualize the helicity of an optical vortex. The orbital angular momentum of light determines the chirality of the nanoneedles, since it is transferred from the optical vortex to the metal. Only the spin angular momentum of the optical vortex can reinforce the helical structure of the created chiral nanoneedles. We also found that optical vortices with the same total angular momentum (defined as the sum of the orbital and spin angular momenta) are degenerate, and they generate nanoneedles with the same chirality and spiral frequency. DOI: 10.1103/PhysRevLett.110.143603 PACS numbers: 42.50.Tx, 42.50.Wk, 79.20.Ds, 79.20.Eb Light that has a helical wave front due to an azimuthal phase shift, expðiL Þ (where L is an integer known as the topological charge), carries orbital angular momentum, L@. Such light is referred as an optical vortex [1][2][3][4]. Optical vortices have been widely investigated for applications such as optical trapping and guiding [5][6][7], as well as superresolution microscopy [8,9]. Circularly polarized light has a helical electric field and a spin angular momentum, S@, associated with its circular polarization. Optical vortices with circular polarization exhibit both wave front and polarization helicities, and a total angular momentum, J@ [10-12], which is defined as the sum of the orbital and spin angular momenta. This angular momentum is evidenced by the orbital and spinning motions of trapped particles in optical tweezers.To date, several researchers have intensely studied the interaction of structured light, such as radially polarized beams, with plasmonic or metallic structures [13][14][15]. However, these previous studies mostly focused on optical properties, such as mode selection, plasmon focusing, etc., of plasmonic or metallic structures, including photonic crystals as well as plasmonic waveguides, prepared by conventional integrated photonic circuit techniques based on lithography and chemical etching. There are few reports on the use of structured light itself to form chiral structures on the nanoscale. Recently, we discovered that the helicity of a circularly polarized optical vortex can be directly transferred to an irradiated metal sample, resulting in the formation of chiral nanoneedles [16][17][18]. This is the first demonstration, to the best of our knowledge, of nanostructures created by structured light with angular momenta, and it clearly represents a new scientific phenomenon.We have also investigated control of the chirality of formed nanoneedles by changing the sign of the optical vortex helicity. Chiral nanostructures have the potential to form many new material structures [19], including planar chiral metamaterials [20,21] and plasmonic nanostructures [22,23]. They can also be used to selectively identify the chirality of chemical composites in nanoscale imaging systems, such as atomic force and scanning tunnel microscopes [24][25][26][27].However, it is currently unclear whe...
Microneedle fabrication on a metal surface based on laser ablation using twisted light with spin was demonstrated, for the first time.The resulting needle showed a height of at least 10 µm above the target surface and a tip diameter of less than 0.3 µm. We also demonstrated the fabrication of a two-dimensional 5 × 6 microneedle array. The needles were uniformly well shaped with an average length and tip diameter of about 10 and 0.5 µm, respectively. ©2010 Optical Society of America
Laser ablation of Ta plates using nanosecond optical vortex pulses was carried out, for the first time. It was suggested that owing to orbital angular momentum of optical vortex, clearer and smoother processed surfaces were obtained with less ablation threshold fluence, in comparison with the ablation by a nonvortex annular beam modified from a spatially Gaussian beam. 8185-8189 (1992). 14. M. Padgett, J. Courtial, and L. Allen, "Light's orbital angular momentum," Phys. Today 57(5), 35-40 (2004). 15. M. S. Soskin, and M. ©2010 Optical Society of America
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.