No abstract

In this study, Author present a quantitative review of the mechanical performance, as well as the separation from the matrix and the recovery performance of surface modification coarse aggregate (SMCA) that was produced using aggregate, whose surface was modified using fine inorganic powder. Therefore, experiments were conducted to measure the compressive strength, microwave heating characteristics, distribution of the void volume, and chemical changes in SMCA concrete, as well as the recovery rate of the aggregate. The results of the experiments showed that reinforcing the interfacial transition zone, which is a weak part in concrete, by coating the surface of the original coarse aggregate with cement paste, can help suppress the occurrence of microcracks and improve the mechanical performance of the aggregate. Further, microcracking and the decomposition of hydrates were observed as a result of microwave heating. In other words, an increase in void size distribution and weakening of the hydrated cement paste led to the effective recovery of recycled coarse aggregate.

Massive volcano-related materials (VRMs) erupted from volcanoes bring the impacts to natural environment and humanity health worldwide, which include generally volcanic ash (VA), volcanic pumice (VP), volcanic tuff (VT), etc. Considering the pozzolanic activities and mechanical characters of these materials, civil engineers propose to use them in low carbon/cement and environment-friendly concrete industries as supplementary cementitious materials (SCMs) or artificial/natural aggregates. The utilization of VRMs in concretes has attracted increasing and pressing attentions from research community. Through a literature review, this paper presents comprehensively the properties of VRMs and VRM concretes (VRMCs), including the physical and chemical properties of raw VRMs and VRMCs, and the fresh, microstructural and mechanical properties of VRMCs. Besides, considering environmental impacts and the development of long-term properties, the durability and stability properties of VRMCs also are summarized in this paper. The former focuses on the resistance properties of VRMCs when subjected to aggressive environmental impacts such as chloride, sulfate, seawater, and freezing-thawing. The latter mainly includes the fatigue, creep, heat-insulating, and expansion properties of VRMCs. This study will be helpful to promote the sustainability in concrete industries, protect natural environment, and reduce the impacts of volcano disaster. Based on this review, some main conclusions are discussed and important recommendations regarding future research on the application of VRMs in concrete industries are provided.

No abstract

In this study, combined deterioration mechanism in reinforced concrete with CO2, flying salt, acid rain is reconstituted by transient reaction-diffusion equation and super long-term deterioration process is analyzed in RCP scenario.This method is confirmed to be consistent with research of the past about carbonation and to be suitable for complex hysteresis in RCP scenario.Simple formula for building group is also formed and reliability design method with mixture distribution of carbonation in several RCP scenarios is proposed. Probability of carbonation by mixture distribution increases in durable member with thick cover depth after 100 years. RCP 100 1) 40 2),3) 4 DuCOM Lecca CIKS Life-365 Life365 SIMCO STADIUM DuCOM Lecca CIKS Life365 STADIUM * Graduate Student,

To build up a resource recycling society, the environmental issue of concrete is approached comprehensively with a new technique using aggregate coating with dielectric material and microwave heating. The increase of concrete strength is achieved by 1.2 times using improved coating agent mixed properly with silica-fume and by-product powder. The recovery of high-quality aggregate can also be achieved with low energy by using microwave heating selectively for coating layer. In addition, about 90% of original aggregate can be recycled. Thus, the trade-off relationship between "strength of concrete" and "recovery of aggregates" and another trade-off between "energy consumption" and "aggregate quality" have been solved simultaneously.

The aim of this study was to develop a technique for the complete recycling of concrete based on microwave heating of surface modification coarse aggregate (SMCA) with only inorganic materials such as cement and pozzolanic materials (silica fume, fly ash). The mechanical properties of SMCA, which was produced using original coarse aggregate (OCA) and inorganic admixtures, as well as its separation from the cement matrix and recovery performance were quantitatively assessed. The experimental results showed that micro structural reinforcement of the interfacial transition zone, which is a weak part of concrete, by coating the surface of the OCA with cement and admixtures such as pozzolanic materials can help suppress the occurrence of micro-cracks and improve the mechanical performance of the OCA. Microwave heating was observed to cause micro-cracking and hydrate decomposition. Increasing the void volume and weakening the hydrated cement paste led to the effective recovery of recycled coarse aggregate.

In this study, a quantitative review was performed on the mechanical performance, permeation resistance of concrete, and durability of surface-modified coarse aggregates (SMCA) produced using low-quality recycled coarse aggregates, the surface of which was modified using a fine inorganic powder. The shear bond strength was first measured experimentally and the interface between the SMCA and the cement matrix was observed with field-emission scanning electron microscopy. The results showed that a reinforcement of the interfacial transition zone (ITZ), a weak part of the concrete, by coating the surface of the original coarse aggregate with surface-modification material, can help suppress the occurrence of microcracks and improve the mechanical performance of the aggregate. Also, the use of low-quality recycled coarse aggregates, the surfaces of which were modified using inorganic materials, resulted in improved strength, permeability, and durability of concrete. These results are thought to be due to the enhanced adhesion between the recycled coarse aggregates and the cement matrix, which resulted from the improved ITZ in the interface between a coarse aggregate and the cement matrix.