Es wurden 6 handelsiibliche Stahle -3 Feinkornstahle im normalisierten Zustand, l vergiiteter Stahl, l warmfester Stahl und l vergiiteter Stahl hoher Festigkeitin einer mit Korrosionskarnmer ausgestatteten Umlaufbiegemaschine gepriift. Als Medium diente 0,05 m NaC1-Losung. Das Ergebnis zeigt, daR bei allen untersuchten Stahlen die Biegewechselfestigkeit durch dieses schwache Korrosionsmedium deutlich herabgesetzt wird. Der EinfluB der SwRK ist urn so groRer, je hoher die Festigkeit des Stahls ist. Im Vergleich dazu sind die Priifparameter von untergeordnetem EinfluB. Durch kathodische Polarisation wird die SwRK-Bestandigkeit bei den Stahlen hoher Festigkeit und SwRK-Empfindlichkeit verbessert; bei den Stahlen niedrigerer Festigkeit wird vollstandiger kathodischer Schutz erzielt.Auch in kondensierender Feuchtigkeit wird die Biegewechselfestigkeit herabgesetzt.Six commercial steelsthree fine-grain normalized steels, one aged steel, one heat-resistant steel and one aged high-strength steelwere tested in rotary bending test machine equipped with a corrosion test cabinet. The test medium used was 0,05 rn NaC1-solution. The results show that the cycling bending strength of all the steels tested is considerably reduced in this weak corrosion medium. The influence of corrosion on mechanical strength is the greater the higher the strength of the steel. The impact of other testing parameters is almost negligible. Cathodic polarization gives rise to increased corrosion fatigue strength of high strength steels and reduces corrosion fatigue sensitivity. In the case of lower strength steels complete cathodic protection can be achieved. The cyclic bending strength of the steels is reduced under condensing humidity conditions, too.
Kupfer‐Aluminium‐Knetlegierungen (Al‐Gehalte zwischen 5 and 10%), Zusätze von (Fe, Ni und Mn) wurden im Dauer‐ und im Wechseltauchversuch in einer Lösung mit 20% H2SO4 and 10% FeSO4 bei 40 °C untersucht. Im stranggepreßten Zustand nimmt die Korrosion der einphasigen alpha‐Legierungen mit dem Al‐Gehalt zu. Größere Menge and ß' ‐ Martensit wirken sich negativ aus. Zusätze von 2 Gew.‐% Ni verbessern die Korrosionsbeständigkeit der Legierungen mit 5 und 8% Al nicht. Kaltverformung der alpha‐Legierungen führt zu einer beträchtlichen Verstärkung der Korrosion. Wärmebehandlung der Legierungen CuAl 10 Fe 4 Mn 3 Ni und CuAl 10 Fe 4 Ni 5 hat keine positive Wirkung. Die korrosion tritt unter den folgenden Formen auf: Flächenkorrosion (CuAl 5); bevorzugte Korrosion der Korngrenzen (CuAl 8, CuAl 8, CuAl9 Mn 5 FeNi und CuAl 10 Fe 4 Ni 5 nach Wärmebehandlung); Entaluminierung (Cual 10 Fe 4 Mn 3 Ni). Bezüglich der Korrosionsbeständigkeit sind die Legierungen CuAl 5, CuAl 8, CuAl 9 Mn und ‐ wahrscheinlich – CuAl 8 Fe am günstigsten.
529beiden Fallen entstehen deckschichtbildende Oxidionen. So bleibt in neutraler Schmelze ein 18%iger Chromstahl passiv. In sauerer Schmelze ubenviegt die losende Wirkung der Disulfate, so dal3 nach Ablauf einer Induktionszeit und Vorliegen einer genugend hohen Metallionenkonzentration in der Schmelze gleiche Korrosionsraten wie in sauerer Eisen-(111)-sulfat-haltiger Schmelze beobachtet werden konnen.Die hier erlauterten Mechanismen der Korrosion unter sulfathaltigen Belagen bestatigen die vielfach berichteten Erfahrungen mit dem Einsatz alkalischer Staube (Kalk, Dolomit) als Inhibitoren. Ihre Wirkung besteht im wesentlichen in einer Absenkung der Disulfatkonzentration des Belages.Fur die Durchtuhrung von auDenstromlosen Korrosionsversuchen im Labor lassen die Ergebnisse folgendes Verfahren sinnvoll erscheinen: Die Versuche sollten in keramischen Tiegeln unter einer Gasphase mit definiertem, konstantem SO3-Gehalt durchgefuhrt werden, wobei die Schmelze unter den Versuchsbcdingungen an Fe( HI)-sulfat gesattigt ist. Der Versuch ist nach den Ergebnissen dieser Arbeit als potentiostatischer Korrosionsversuch anzusehen, der die Untersuchung des Einflusses der Dauer, der Legierungszusammensetzung, der Zusammensetzung der Gasphase und von Zusatzen zur Schmelze weitgehend frei vom EinfluD von Anlaufphasen und sehr wahrscheinlich mit einem hohen Ma13 an Reproduzierbarkeit gestattet.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.