No abstract

No abstract

No abstract

The in-situ deep mixing technique has been established as an eŠective means to eŠect columnar inclusions into soft Bangkok clay to enhance bearing capacity and reduce settlement. In this paper, an attempt is made to identify the critical factors governing the strength development in cement admixed Bangkok clay in both the laboratory and theˆeld. It is found that clay-water/cement ratio, wc/C is the prime parameter controlling the laboratory strength development when the liquidity index varies between 1 and 2. Based on this parameter and Abrams' law, the strength prediction equation for various curing times and combinations of clay water content and cement content is proposed and veriˆed. This will help minimize the number of trials necessary to arrive at the quantity of cement to be admixed. Besides the wc/C, the strength of deep mixing column is controlled by the execution and curing conditions. For low strength improvement (laboratory 28-day strength less than 1,500 kPa), theˆeld strength of the deep mixing columns, quf, made up from both dry and wet mixing methods is higher than 0.6 times the laboratory strength, qul. The quf/qul ratios for the wet mixing columns are generally higher than those for the dry mixing columns. This higher strength ratio is due to the dissipation of the excess water in the column (consolidation) caused by theˆeld stress. The water to cement ratio, W/C, of 1.0 is recommended for the wet mixing method of the soft Bangkok clay. A fast installation rate was shown to provide high quality for low strength columns. Suggestions are made for improving the deep mixing of soft Bangkok clay, which are very useful both from economic and engineering viewpoints.

No abstract

No abstract

No abstract

No abstract