No abstract

A magnetically-quiet environment is important for detecting faint magnetic-field signals or nonmagnetic spin-dependent interactions. Passive magnetic shielding using layers of large magnetic-permeability materials is widely used to reduce the magnetic-field noise. The magnetic-field noise can also be actively monitored with magnetometers and then compensated, acting as a complementary method to the passive shielding. We present here a general model to quantitatively depict and optimize the performance of active magnetic-field stabilization and experimentally verify our model using optically-pumped atomic magnetometers. We experimentally demonstrate a magnetic-field noise rejection ratio of larger than ∼800 at low frequencies and an environment with a magnetic-field noise floor of ∼40 fT/Hz1/2 in unshielded Earth’s field. The proposed model provides a general guidance on analyzing and improving the performance of active magnetic-field stabilization with magnetometers. This work offers the possibility of sensitive detections of magnetic-field signals in a variety of unshielded natural environments.

Optically pumped alkali atomic magnetometers based on measuring the Zeeman shifts of the atomic energy levels are widely used in many applications because of their low noise and cryogen-free operation. When alkali atomic magnetometers are operated in an unshielded geomagnetic environment, the nonlinear Zeeman effect may become non-negligible at high latitude and the Zeeman shifts are thus not linear to the strength of the magnetic field. The nonlinear Zeeman effect causes broadening and partial splitting of the magnetic resonant levels, and thus degrades the sensitivity of the alkali atomic magnetometers and causes heading error. In this work, we find that the nonlinear Zeeman effect also influences the frequency response of the alkali atomic magnetometer. We develop a model to quantitatively depict the frequency response of the alkali atomic magnetometer when the nonlinear Zeeman effect is non-negligible and verify the results experimentally in an amplitude-modulated Bell–Bloom cesium magnetometer. The proposed model provides general guidance on analyzing the frequency response of the alkali atomic magnetometer operating in the Earth’s magnetic field. Full and precise knowledge of the frequency response of the atomic magnetometer is important for the optimization of feedback control systems such as the closed-loop magnetometers and the active magnetic field stabilization with magnetometers. This work is thus important for the application of alkali atomic magnetometers in an unshielded geomagnetic environment.

No abstract

This paper introduces a magnetically quiet environment where the magnetic-field noise is actively suppressed using an optically pumped potassium magnetometer. In a large dynamic range of Earth’s magnetic fields, the magnetic-resonance signals of potassium are completely separated in frequency, and we experimentally demonstrate that one of them could be used to measure and compensate magnetic-field noise. The magnetic-field noise floor after stabilization is ∼100 fT/Hz under a bias field ranging from 20 to 100 μT. This method could be useful for fundamental-physics experiments and biomedical sciences where a large dynamic range of quiet magnetic fields is needed.

No abstract