Two-dimensional (2D) materials as saturable absorbers (SAs) have attracted intense interest for applications in pulsed laser generation because of their distinguishing optical properties. However, the existing methods of preparing SAs were insufficient. Here, we fabricated graphene oxide (GO) SAs by Langmuir-Blodgett (LB) methods for passively Q-switched Nd:YAG laser. The GO sheets were deposited on a quartz plate using the LB method. Two different LB-GO SAs grown under the surface pressure of 22 and 38 mN/m were obtained. Compared with the drop coating method, LB-GO SA exhibited more excellent uniformity, larger nonlinear performance and higher optical transparency. By inserting LB-GO SA into the Nd:YAG laser linear cavity, the short pulse duration of 156 ns and the average output power of 1.313 W were obtained. The slope efficiency was as high as 43.7%, due to low loss of the LB-GO SA. Our results illustrated a new way for preparing the SA using the LB technique.
Antireflective surfaces, with their great potential applications, have attracted tremendous attention and have been the subject of extensive research in recent years. However, due to the significant optical impedance mismatch between a metal surface and free space, it is still a challenging issue to realize ultralow reflectance on a metal surface. To address this issue, we propose a two-step strategy for constructing antireflective structures on a Ti-6Al-4V (TC4) surface using nanosecond and femtosecond pulsed lasers in combination. By controlling the parameters of the nanosecond laser, microgrooves are first scratched on the TC4 surface to reduce the interface reflection. Then, the femtosecond laser is focused onto the sample surface with orthogonal scanning to induce deep air holes and nanoscale structures, which effectively enhances the broadband absorption. The antireflection mechanism of the dual-scale structures is discussed regarding morphological characterization and hemispherical reflectance measurements. Finally, the modified sample surface covered with micro-nano hybrid structures is characterized by an average reflectance of 3.1% over the wavelengths ranging from 250 nm to 2250 nm.
The Ti-6Al-4V polished by femtosecond laser processing is first investigated. The surface nanoparticles of Ti-6Al-4V induced by femtosecond laser have been characterized by scanning electron microscopy and energy dispersive spectrometry, and the influence of laser fluence and the overlapping rate of laser beam on surface roughness have also been analyzed. Moreover, the relationship between the laser parameters and the surface roughness of Ti-6Al-4V has been revealed, and the fine surface roughness of Ti-6Al-4V is obtained based on the optimized femtosecond laser processing parameters.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.