In parallel to the direct contribution to the procurement phase of ITER and Broader Approach, CEA has initiated research & development programmes, accompanied by experiments together with a significant modelling effort, aimed at ensuring robust operation, plasma performance, as well as mitigating the risks of the procurement phase. This overview reports the latest progress in both fusion science and technology including many areas, namely the mitigation of superconducting magnet quenches, disruption-generated runaway electrons, edge-localized modes (ELMs), the development of imaging surveillance, and heating and current drive systems for steady-state operation. The WEST (W Environment for Steady-state Tokamaks) project, turning Tore Supra into an actively cooled W-divertor platform open to the ITER partners and industries, is presented.

Dynamic simulations of the cryogenic system of a tokamak R Cirillo, C Hoa, F Michel et al. Abstract. The JT-60SA cryogenic system a superconducting tokamak currently under assembly at Naka, Japan. After one year of commissioning, the acceptance tests were successfully completed in October 2016 in close collaboration with Air Liquide Advanced Technologies (ALaT), the French atomic and alternative energies commission (CEA), Fusion for Energy (F4E) and the Quantum Radiological Science and Technology (QST). The cryogenic system has several cryogenic users at various temperatures: the superconducting magnets at 4.4 K, the current leads at 50 K, the thermal shields at 80 K and the divertor cryo-pumps at 3.7 K. The cryogenic system has an equivalent refrigeration power of about 9.5 kW at 4.5 K, with peak loads caused by the nuclear heating, the eddy currents in the structures and the AC losses in the magnets during cyclic plasma operation. The main results of the acceptance tests will be reported, with emphasis on the management of the challenging pulsed load operation using a liquid helium volume of 7 m³ as a thermal damper.

No abstract

The European Spallation Source (ESS) is a neutron-scattering facility being built with extensive international collaboration in Lund, Sweden. Three cryogenic plants with a vast cryogenic distribution system meet the cooling requirements of the superconducting RF cavities in the accelerator (ACCP), the cold hydrogen moderators in the target (TMCP), a cryomodule test stand and the sample environments for neutron instruments (TICP). The first of the three plants, the TICP has been successfully installed, commissioned and acceptance tested in 2018 by Air Liquide Advanced Technologies. Meanwhile the other two cryoplants (ACCP and TMCP) are under commissioning and testing by Linde Kryotechnik AG. The cryoplants share common helium buffer tanks, safety relief headers and helium recovery system due to historical, economical and architectural reasons. The helium recovery strategy and system configuration will be described in the paper. Resulting challenges, risks and safety relevant events that happened during, especially parallel, commissioning activities will be presented. The measures implemented to mitigate major risk and lessons learned are addressed as well.

No abstract

No abstract

The accelerator cryoplant (ACCP) providing the cooling for the cryomodules and the cryogenic distribution system for the cold part of the ESS proton linac is being built and commissioned at the European Spallation Source (ESS) in Lund, Sweden. The ACCP warm compressor system (WCS) consists of several compression stages. The sub-atmospheric pressure stage (SP) is used to compress helium coming from the cold compressors directly to middle pressure (MP) level. The low pressure stage (LP) compresses the helium from LP level to the same MP level, being merged with additional flow from the cold box and the flow from the SP stage. The total flow is compressed in a single compression stage (HP) from MP to HP. The oil-flooded screw compressors are chosen in a way that the flow in each stage SP, LP and MP is compressed by a single screw compressor. Both, SP and LP compressors are equipped with a variable frequency drive (VFD) to adapt the compressor capacities to the various load cases. The ACCP had been contracted to Linde Kryotechnik AG in 2015 and all compressors are made by the Aerzener Maschinenfabrik GmbH, Germany. Following successful installation and commissioning in 2018, the final 100 hours test run at maximum nominal design condition and the part load tests under various ACCP operation modes were carried out at the beginning of 2019. The key parameters, including mass flow, power consumption, isothermal and volumetric efficiencies, are well fulfilled with the design data. The paper describes the system features, project challenges, lessons learned and acceptance test results.

No abstract