In present work, a graphene oxide chemically modified with 2,2'-dipyridylamine (GO-DPA), was synthesized by simple, fast and low-cost process for the simultaneous adsorption of four toxic heavy metals, Pb(II), Cd(II), Ni(II) and Cu(II), from aqueous solutions. The synthesized adsorbent was characterized by FT-IR, XRD, XPS, SEM and AFM measurements. The effects of variables such as pH solution, initial ion concentrations, adsorbent dosage and sonicating time were investigated on adsorption efficiency by rotatable central composite design. The optimum conditions, specified as 8mg of adsorbent, 20mgL(-1) of each ion at pH 5 and short time of 4min led to the achievement of a high adsorption capacities. Ultrasonic power had important role in shortening the adsorption time of ions by enhancing the dispersion of adsorbent in solution. The adsorption kinetic studies and equilibrium isotherms for evaluating the mechanism of adsorption process showed a good fit to the pseudo-second order and Langmuir model, respectively. The maximum adsorption capacities (Qm) of this adsorbent were 369.749, 257.201, 180.893 and 358.824mgg(-1) for lead, cadmium, nickel and copper ions, respectively. The removal performance of adsorbent on the real wastewater samples also showed the feasibility of adsorbent for applying in industrial purposes.

A novel adsorbent, based on modifying graphene oxide (GO) chemically with 2-pyridinecarboxaldehyde thiosemicarbazone (2-PTSC) as ligand, was designed by facile process for removal of Hg(II) from aqueous solution. Characterization of the adsorbent was performed using various techniques, such as FT-IR, XRD, XPS, SEM and AFM analysis. The adsorption capacity was affected by variables such as adsorbent dosage, pH solution, Hg(2+) initial concentration and sonicating time. These variables were optimized by rotatable central composite design (CCD) under response surface methodology (RSM). The predictive model for Hg(II) adsorption was constructed and applied to find the best conditions at which the responses were maximized. In this conditions, the adsorption capacity of this adsorbent for Hg(2+) ions was calculated to be 309mgg(-1) that was higher than that of GO. Appling the ultrasound power combined with adsorption method was very efficient in shortening the removal time of Hg(2+) ions by enhancing the dispersion of adsorbent and metal ions in solution and effective interactions among them. The adsorption process was well described by second-order kinetic and Langmuir isotherm model in which the maximum adsorption capacity (Qm) was found to be 555mgg(-1) for adsorption of Hg(2+) ions over the obtained adsorbent. The performance of adsorbent was examined on the real wastewaters and confirmed the applicability of adsorbent for practical applications.

MIL-68(Al) as a metal-organic framework (MOF) was synthesized and characterized by different techniques such as SEM, BET, FTIR, and XRD analysis. This material was then applied for simulations removal of malachite green (MG) and methylene blue (MB) dyes from aqueous solutions using second order derivative spectrophotometric method (SODS) which was applied to resolve the overlap between the spectra of these dyes. The dependency of dyes removal efficiency in binary solutions was examined and optimized toward various parameters including initial dye concentration, pH of the solution, adsorbent dosage and ultrasonic contact time using central composite design (CCD) under response surface methodology (RSM) approach. The optimized experimental conditions were set as pH7.78, contact time 5min, initial MB concentration 22mgL(-1), initial MG concentration 12mgL(-1) and adsorbent dosage 0.0055g. The equilibrium data was fitted to isotherm models such as Langmuir, Freundlich and Tempkin and the results revealed the suitability of the Langmuir model. The maximum adsorption capacity of 666.67 and 153.85mgg(-1) was obtained for MB and MG removal respectively. Kinetics data fitting to pseudo-first order, pseudo-second order and Elovich models confirmed the applicability of pseudo-second order kinetic model for description of the mechanism and adsorption rate. Dye-loaded MIL-68(Al) can be easily regenerated using methanol and applied for three frequent sorption/desorption cycles with high performance. The impact of ionic strength on removal percentage of both dyes in binary mixture was studied by using NaCl and KCl soluble salts at different concentrations. According to our findings, only small dosage of the proposed MOF is considerably capable to remove large amounts of dyes at room temperature and in very short time that is a big advantage of MIL-68(Al) as a promising adsorbent for adsorptive removal processes.

No abstract

In this study, ultrasonic-assisted removed Congo red by MOF-5/ Cu as a metal-organic framework, making the adsorption process very fast. Ultrasonic has proven to be a handy tool in accelerating dyes' adsorption by enhancing the adsorbent's affinity and the adsorbent. MOF-5 synthesized the solvothermal method and then modified it by CuCl 2 in ambient conditions. Scanning Electron Microscope (SEM), X-ray Diffraction (XRD), Fourier Transform Infrared (FT-IR), Brunauer-Emmett-Teller (BET), and Thermogravimetric analysis (TGA) were used for the identification structure and morphology of MOF-5/Cu. Sonication had an essential role in shortening the adsorption time (2 min) of Congo red by enhancing the dispersion of adsorbent (MOF-5) in solution. Congo red concentration was measured with a UV-visible spectrometer apparatus. Optimal values of Congo red concentration, Dosage of MOF-5/Cu, time, and pH were obtained by Central composite design. According to the optimal parameters, the adsorption process was very rapid. Removal of Congo red happened with excellent adsorption capacity (357.42 mg g À 1 ). Also, the MOF-5/Cu was regenerating by acetone five-time and show good results. Repeatability of the adsorption process was carried out, and the Relative Standard Deviation (RSD) was obtained 1.85 %.

In this work, metal organic framework (MIL-68(Al)), was synthesized by a simple, fast and low-cost process for simultaneous removal of methylene blue and Rhodamine B, regarded to be toxic and even carcinogenic, from aqueous solution.

No abstract

Optical chemical sensor for determination of mercury ions.