Mass spectrometry has recently undergone a second contemporary revolution with the introduction of a new group of desorption/ionization (DI) techniques known collectively as ambient mass spectrometry. Performed in an open atmosphere directly on samples in their natural environments or matrices, or by using auxiliary surfaces, ambient mass spectrometry (MS) has greatly simplified and increased the speed of MS analysis. Since its debut in 2004 there has been explosive growth in the applications and variants of ambient MS, and a very comprehensive set of techniques based on different desorption and ionization mechanisms is now available. Most types of molecules with a large range of masses and polarities can be ionized with great ease and simplicity with the outstanding combination of the speed, selectivity, and sensitivity of MS detection. This review describes and compares the basis of ionization and the concepts of the most promising ambient MS techniques known to date and illustrates, via typical analytical and bioanalytical applications, how ambient MS is helping to bring MS analysis deeper than ever into the "real world" open atmosphere environment--to wherever MS is needed.

An ambient ionization/desorption technique, namely, easy ambient sonic-spray ionization mass spectrometry (EASI), has been applied to crude oil samples. From a single droplet of the sample placed on an inert surface, EASI(+/-) is shown to promote efficient desorption and ionization of a myriad of polar components via the action of its cloud of very minute supersonic bipolar charged droplets. The gaseous [M + H](+) and [M - H](-) ions concurrently formed by EASI(+/-) were analyzed by Fourier transform mass spectrometry (FT-ICR MS), and a total of approximately 6000 acidic and basic components have been attributed. EASI(+/-) FT-ICR MS of crude oils is show to be almost as fast as ESI(+)/ESI(-) FT-ICR MS, providing similar compositional information of polar components and spectral quality comparable to that of a commercial nonochip-based robotic ESI device. EASI(+/-) requires no sample workup thus eliminating risks of contamination during sample manipulation and memory effects because of carry over in pumping ESI lines. More importantly, EASI(+/-) is a voltage-free ionization technique therefore eliminating risks of redox processes or duality of ionization mechanisms that can be observed in voltage-assisted processes. Data visualization via typical petroleomic plots confirms the similarity of the compositional information provided by EASI(+/-) compared to ESI(+)/ESI(-). The ambient EASI(+/-) FT-ICR MS method requires no voltage switching in changing the ion polarity mode, offering a workup, heating and voltage-free protocol for petroleomic studies performed at open atmosphere directly on the undisturbed crude oil sample.

A fast and reliable method is presented for the analysis of vegetable oils. Easy ambient sonic-spray ionization mass spectrometry (EASI-MS) is shown to efficiently desorb and ionize the main oil constituents from an inert surface under ambient conditions and to provide comprehensive triacylglyceride (TAG) and free fatty acid (FFA) profiles detected mainly as either [TAG + Na](+) or [FFA-H](-) ions. EASI(+/-)-MS analysis is simple, easily implemented, requires just a tiny droplet of the oil and is performed without any pre-separation or chemical manipulation. It also causes no fragmentation of TAG ions hence diacylglyceride (DAG) and monoacylglyceride (MAG) profiles and contents can also be measured. The EASI(+/-)-MS profiles of TAG and FFA permit authentication and quality control and can be used, for instance, to access levels of adulteration, acidity, oxidation or hydrolysis of vegetable oils in general.

Focusing on the O 2 class, a set of crude oils from Llanos Orientales Basin, Colombia, were classified in terms of biodegradation levels using negative ion mode electrospray Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS) and chemometric analysis. The O 2 class, which is mainly composed of naphthenic carboxylic acids, was monitored because these polar crude oil constituents are known to be substantially affected by microbial activity. Principal component analysis (PCA) applied on the O 2 profile was able to classify the crude oils into three groups: biodegraded, mixture, and nonbiodegraded. From the relative abundances of the O 2 class, a clear trend on acid distribution could be directly correlated with biodegradation: a rising in abundance of saturated acids with low double-bond equivalent (DBE) values (despite the lowering observed for fatty acids with DBE = 1), expressed by the A/C index. The combined use of two indexes, the A/C index and a new index also based on saturated acid abundances, the SA index, is proposed as an effective strategy to monitor biodegradation. This approach showed to be particularly useful to fill blanks on discrete biodegradation classification and when samples are actually composed of a mixture of oils with contrasting biodegradation levels. Results are in good agreement with predictions based on classical hydrocarbon biomarker analysis.

No abstract

No abstract

Biodiesel is composed of saturated and unsaturated methyl esters of fatty acids formed via transesterification of vegetable oil or animal fat. This chemical nature makes biodiesel much more susceptible to oxidation or autoxidation during long-term storage than conventional petrodiesel. Increasing resistance to oxidation therefore requires the use of antioxidants. This paper investigates the effectiveness of the N,N 0 -di-sec-butylp-phenylenediamine (1) as a antioxidant to improve the oxidative stability of soybean, sunflower and canola biodiesel. Results indicate that the induction period for oxidation of soybean and canola biodiesel is significantly improved with the addition of only 0.2 ppm of the 1, reaching the oxidative stability specification (6 h by the Rancimat test). For sunflower biodiesel, 2.0 ppm of the 1 was necessary. This additive is also shown to be efficiently detected by the easy ambient sonic-spray ionization mass spectrometry technique, indicating that 1 and its analogues and derivatives could also be used as versatile artificial markers of biodiesel.

Easy ambient sonic-spray ionization mass spectrometry (EASI-MS) was used to follow the maturation of Jatropha curcas L. seeds via the monitoring of the triacylglycerides (TAG) profile of the oil. Results show that TAG composition is significantly modified during seed development but remains nearly unchanged during storage. The EASI-MS oil analysis performed herein is simple, requires just a tiny droplet of the oil and is performed without any pre-separation or chemical manipulation. The oil from Jatropha gossypifolia L. was also evaluated, and a very different TAG profile was obtained.