[ID] Indonesia merupakan negara dengan resiko gempa tinggi, hal ini diakibatkan oleh pertemuan lempeng-lempeng tektonik utama dan lempeng kecil lainnya yang mengelilingi Indonesia. Setiap wilayah indonesia memiliki tingkat resiko gempa yang berbeda-beda, mulai dari resiko gempa rendah hingga resiko gempa tinggi. Tujuan dari penelitian ini adalah mengetahui perbandingan respons dan kinerja struktur suatu bangunan gedung di beberapa wilayah yang mewakili tingkat resiko gempa rendah hingga tinggi. Adapun wilayah-wilayah yang ditinjau dalam penelitian ini yaitu wilayah Pontianak, Palembang, Jakarta, Bandar Lampung, dan Palu. Analisis dilakukan pada bangunan beton bertulang empat lantai dengan dinding geser dengan menggunakan bantuan program SAP 2000 guna mendapatkan repons dan kinerja struktur. Hasil respons struktur dari penelitian menunjukkan nilai simpangan lateral lantai dari yang terbesar hingga terkecil yaitu dimulai dari wilayah Palu, Bandar Lampung, Jakarta, Palembang, dan Pontianak. Wilayah Palu memiliki nilai simpangan lateral lantai yang terbesar yaitu 23,745 mm dan 23,690 mm untuk arah X dan Y sedangkan wilayah Pontianak memiliki nilai simpangan lateral lantai terkecil dengan besar simpangan lateral 7,571 mm dan 7,439 mm untuk arah X dan Y. Berdasarkan analisis pushover didapatkan level kinerja struktur memiliki level kinerja B untuk Wilayah Palu dan IO untuk wilayah lainnya. [EN] Indonesia is a country with a high risk of earthquake due to the meeting of the main tectonic plates and other small plates that surround Indonesia. Each area in this country has a different level of earthquake risk, ranging from low to high earthquake risk. This study aims to compare the response and structural performance of buildings in some areas with low to high earthquake risk levels. The areas covered Pontianak, Palembang, Jakarta, Bandar Lampung, and Palu. The analysis was carried out on a four-story reinforced concrete with shear walls using the SAP 2000 program to obtain the response and performance of the building structure. The results of the structural response showed the value of the floor lateral deviation from the largest to the smallest, starting from Palu, Bandar Lampung, Jakarta, Palembang, and Pontianak. Pulu has the largest floor lateral deviation values of 23.745 mm and 23.690 mm for the X and Y directions, while Pontianak has the smallest floor lateral deviation values of 7.571 mm and 7.439 mm for the X and Y directions. Based on the pushover analysis, the structure has a performance level of B for Palu areas and IO for other areas.
This experimental study is part of fly ash based geopolymer research development. The type F fly ash which is the quite abundant by-product materials from power plant burning coal in Tanjung Enim, South Sumatera was the background of this research. However, this kind of fly ash was being treated before it would be used. As known that the mechanical properties of the harden of cementitious material is affected by its fineness of the binder material. The beginning researches about this fly ash based geopolymer concluded that early harden process was being difficult. By this problem, in this research some of accelerator/fly ash ratios are used as the one of the variables. This study aimed to determine the contribution of the fineness level of the fly ash as well as the accelerator/flyash ratio to the setting time and its compressive strength of the geopolymer mortar. The sodium hydroxide (NaOH) and sodium silicate (Na2SiO3) as the activator and the accelerator with the 0%, 0.5%, 1%, 1.5% and 2% as the accelerator/fly ash ratios are used in this study. The 3 zones of the fineness level of flyash are being the other variable of the research. The results showed that the fineness level based on fall zone and the accelerator/flyash ratio affect the setting time and compressive strength significantly. The fineness level based on the fall zone increased the compressive strength and tended to produce the shorter setting time. While the higher accelerator/flyash ratio gives the higher compressive strength of geopolymer mortar. The initial setting time and final setting time ranged from 90 minutes to 225 minutes.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.