The addition of carbon fibers has proved to be one of the most effective ways of improving the electrical conductivity of ordinary cement pastes. This implies that such materials can be used in strain, temperature, and chemical sensing. The present study was aimed at the development of such sensors. Inexpensive, petroleum-pitch-based, mesophase, high-modulus carbon fibers were used throughout. It was seen that materials with high conductivity could be obtained by reinforcing hydrated cement paste with carbon fibers. Electronic conduction was seen as the dominant mode over electrolytic conduction. Compared with strain, the influence of temperature on the electrical resistivity was found to be insignificant, implying a lack of need for temperature correction. Results also indicate that these sensors can be excellent crack detectors.Key words: carbon-fiber-reinforced cement-based composites, structural health monitoring, sensor, electrical resistivity, compressive strain, temperature, moisture content, chloride concentration, fiber volume fraction, water/cementitious ratio, cracking.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.