RESUMENEl raleo tiene implicancias económicas y técnicas para producción forestal y para la actividad industrial. El objetivo del estudio fue determinar la influencia de la intensidad de raleo sobre las propiedades anatómicas de la madera. Se trabajó con muestras tomadas a 1,30 m de altura, de 24 árboles proveniente de un ensayo de raleo en Pinus taeda de 20 años de edad, intervenido a los 3 años, con remoción del 0%, 50%, 75% y 87,5% de las plantas de la densidad inicial de plantación (1960 árboles/ ha). Se midieron diámetro a la altura de pecho, altura total, diámetro en la base de la copa viva y altura a la base de la copa viva, longitud de traqueidas, espesor de pared celular y ángulo microfibrilar. La longitud de traqueidas fue mayor en el tratamiento con 87,5% de raleo. Los tratamientos con 0% y 50% de raleo favorecieron la obtención de mayores valores de espesor de pared y menores valores de ángulo microfibrilar. Se concluyó que esta práctica silvícola altera a las propiedades anatómicas de la madera de Pinus taeda y que la longitud de traqueidas está fuertemente relacionada con el tamaño del árbol y con la longitud de la copa verde.Palabras clave: Ángulo microfibrilar, espesor de pared celular, intensidad de raleo, longitud de traqueidas. ABSTRACTThinning has technical and economic implications for both, forest production and industrial activity. The aim of this study was to determine the effect of thinning intensity on the anatomical properties of pine wood. Samples were taken at 1.30 m height, from 24 Pinus taeda trees of 20 years old, coming from a thinning treatment. The plantation was intervened at 3 years, with removal of 0%, 50%, 75% and 87,5% of the trees from the initial density (1960 trees/ha). The evaluated variables were: diameter at breast height, total height, diameter on the base of the live crown, height at base of live crown, tracheid length, cell wall thickness and microfibril angle. The tracheid length was higher in 87.5% thinning treatment. Treatments with 0 % and 50% thinning have favored the obtaining of higher values of cell wall thickness and lower values of microfibril angle. Results suggest that this silvicultural practice alters the anatomical properties of Pinus taeda wood and that tracheid length is strongly related to tree size and length of live crown.
http://dx.doi.org/10.5902/1980509819611Diferentes intereses industriales, energéticos y ambientales han motivado el análisis de las distintas posibilidades de aprovechamiento de la biomasa forestal, este tema está adquiriendo un creciente protagonismo, por lo que la cuantificación de la biomasa aérea de estos sistemas forestales constituye un primer paso fundamental e ineludible. El objetivo de este trabajo fue desarrollar modelos que permitan estimar la biomasa de los diferentes compartimentos aéreos de Eucalyptus grandis. Para ello se emplearon datos de 41 árboles provenientes de rodales de diferentes edades, entre 4 y 32 años, ubicados en la región NE de Argentina. Se tomaron 23 individuos ubicados en la Zona Norte y Alta de Misiones (zona 1) y 18 en el Sur de Misiones y NE de Corrientes (zona 2). Se determinó la biomasa de hojas, ramas menores a 5 cm, ramas mayores a 5 cm, total de ramas, fuste y biomasa total del árbol. Para el ajuste de modelos se tomaron diversas variables independientes, el diámetro a la altura de pecho (dap), la altura total del árbol (h), el producto (dap2*h) y la variable “dummy” (zona). Para el caso de la biomasa de ramas y de hojas, debido a que no se lograron resultados satisfactorios con el empleo de estas variables, se examinaron modelos que adicionaban índice de sitio, factor de espaciamiento, diámetro en la base de la copa verde (dbcv), altura hasta la base de la copa verde (hbcv), longitud de copa verde (lcv), el área transversal de albura en la base de copa verde (g Alb bcv) y diferentes combinaciones de estas variables. Los modelos fueron seleccionados en base al coeficiente de determinación y el error cuadrático medio. Para la biomasa de ramas menores a 5 cm, ramas mayores a 5 cm, total de ramas, fuste y total, los mejores modelos fueron los que incorporaron como variables regresoras, el diámetro a la altura de pecho, la altura total del árbol y la variable “dummy” (zona). Para la biomasa de hojas, las variables, edad, área basal y número de árboles por hectárea permitieron mejorar la estimación. Los coeficientes de determinación para los modelos de biomasa total y de fuste fueron de 0,99, para el total de ramas fue de 0,83, para ramas menores a 5 cm 0,69, para ramas mayores de 5 cm 0,53 y 0,65 para hojas. Se recomienda incrementar la base de datos a los efectos de intentar mejorar las predicciones de biomasa de hojas y ramas.
El objetivo de este trabajo fue evaluar la variación radial de la morfología de las traqueidas de pinos híbridos. Se extrajeron tarugos radiales de árboles de pino híbrido "F 1 INTA-PINDO", en dos ensayos. Las muestras se tomaron a 1,30 m de altura, se disociaron y se midieron las características anatómicas de las traqueidas individuales obtenidas de la fracción de madera tardía de los anillos de crecimiento 4, 7, 10 y 11 mediante microscopía óptica con análisis de imagen. Para la obtención del ángulo microfibrilar se utilizó la técnica a través de las puntuaciones en traqueidas individuales. Para el ángulo microfibrilar dentro de cada edad, se encontraron diferencias estadísticas significativas entre sitios y familias para un nivel de confianza del 95 %, mientras que las variaciones no fueron significativas para las demás propiedades estudiadas. Se observaron cambios importantes en la morfología celular de las traqueidas para las edades consideradas. Los valores medios de ángulo microfibrilar, ancho del lumen y ancho total de las traqueidas disminuyeron con la edad, independientemente del sitio y las familias evaluadas. Los valores medios de espesor y la proporción de pared celular aumentaron con la edad. Estos resultados indican que las propiedades de la madera no serían uniformes en el sentido radial y deben ser tenidas en cuenta al momento de utilizarlas para determinados usos. Se identificaron familias con mejor performance en crecimiento y parámetros deseables para la calidad estructural de la madera, las mismas pertenecen a las mejores posiciones del ranking genético de crecimiento. Se concluye que, a los 11 años de edad este taxón produce madera madura, debido a las características de su morfología celular.Palabras clave: Anatomía de la madera, ángulo microfibrilar, espesor de pared celular, madera tardía, variación radial.
ResumoÁrea colorida, largura dos anéis de crescimento e porcentagem de lenho tardio no pinho híbrido F1 INTA-PINDO. As características dos anéis anuais são indicadores do crescimento e qualidade da madeira. Aos 11 anos de idade, foram tomadas uma amostra de 90 arvores de pinho híbrido F1 de Pinus elliottii x Pinus caribaea var. hondurensis de 2 localidades, compostas por 15 famílias e 3 posições no ranking de crescimento genético. As rodelas foram tomadas a 0,10 m; 1,30 m e 4,45 m de altura do fuste, avaliou-se a porcentagem da área colorida na região central da tora, largura e área dos anéis de crescimento e proporção de lenho tardio. Os dados foram analisados com modelos lineares mistos. Foram encontradas diferenças estatisticamente significativas entre as famílias para as variáveis analisadas, com exceção do percentual de lenho tardio. A família 02 apresentou maior crescimento e área livre de coloração. As famílias 01 e 03 apresentaram maior porcentagem de área colorida. A porcentagem de área colorida aumentou com a altura da árvore. A largura do anel de crescimento diminuiu com a altura da árvore e foi maior para as famílias 01, 02, 03, 04, 05 e 07. A porcentagem de lenho tardio aumentou da medula para a casca e da base da árvore para a copa. Conclui-se que as famílias da posição superior do ranking genético de crescimento apresentaram maior valor médio de largura e área de anéis de crescimento e a mesma proporção de lenho tardio em relação às famílias de menor crescimento, sendo essas características desejadas para obtenção madeira de qualidade para usos estruturais. Palavras-chave: Qualidade da madeira, duraminização da madeira, características do lenho, ranking genético de crescimento
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.