No abstract

To control a vast spectrum of applications and processes, an understanding of the morphologies of clay mineral assemblies dispersed in aqueous or non-aqueous media is important. As such, the objective of this study was to verify the relationship between dispersion medium type and the size and morphology of the clay aggregates that are formed, which can increase knowledge on the assembly formation process. Scanning electron microscopy (SEM), X-ray diffraction (XRD), and Fourier-transform infrared (FTIR) spectroscopy were used in an attempt to describe kaolinite platelet organization in non-aqueous media and to compare it to the organization in aqueous media or in media with or without a selection of dissolved organic polymers. The SEM images indicated that the kaolinite platelet assembly process occurs during slow evaporation of the solvent. Because the experimental procedure was rigorously identical for all cases in this study, the SEM images compared how the effects of various media and environments on kaolinite platelet interactions can lead to different morphologies. Quite spectacular morphological differences were indeed observed between samples dispersed in aqueous and non-aqueous media, particularly when the kaolinite platelets were dispersed in an organic solvent with dissolved organic polymers. For kaolinite dispersed in water, only small aggregates were observed after slow evaporation. In contrast, large kaolinite booklets or vermiform aggregates were formed by slow solvent evaporation when kaolinite was first dispersed into some organic solvents. The aggregates were particularly large when an organic polymer was dissolved in the organic solvent. For example, kaolinite aggregates dispersed in a binary cyclohexane/toluene mixture with dissolved ethyl cellulose (EC) had top apparent surface areas (i.e. stacking length × width) of more than 3,000 µm2. Other dissolved polymers, such as polystyrene or the polysaccharide, guar gum, gave similar results. Kaolinite platelet aggregation resulted from face-to-face interactions as well as edge-to-face and edge-to-edge interactions. The XRD results showed that ethyl cellulose led to the formation of smaller kaolinite platelets with an increased tendency to form larger aggregates, which is due to the ability of EC to chemically interact with silanol and/or the aluminol groups of kaolinite.

No abstract

Polymer-clay nanocomposites are highly sought-after materials, mainly due to their applicability in a variety of avenues. From the standpoint of the preparation of these nanocomposites, however, organic compatibility with clay and adherence to “green chemistry” concepts and principles can be limiting factors. As such, the objective was to prepare a biopolymer-modified clay nanocomposite using a simple and environmentally friendly method of preparation, whereby pre-treatment of the clay for organic compatibility was bypassed. Novel montmorillonite nanocomposites were prepared using neutral guar gum and cationic guar gum. X-ray diffraction (XRD) and transmission electron microscopy (TEM) confirmed the formation of intercalated structures. A monolayer configuration of cationic guar within the interlayer space was indicated by XRD results, while treatment with neutral guar gum resulted in the observance of both monolayer and bilayer configurations. Additionally, TEM results indicated partial exfoliation. Results attributed from 13C cross polarization/magic angle spinning nuclear magnetic resonance spectroscopy (CP/MAS NMR) of the nanocomposites indicated peaks corresponding to the guar constituent, confirming the adsorption of the biopolymer. Inductively coupled plasma emission spectrometry (ICP-ES) results indicated the exchange of cations present in neutral guar gum with the sodium cations of montmorillonite, in the case of the neutral guar nanocomposites.

No abstract

No abstract

The development of reference standards for nanoparticle sizing allows for cross laboratory studies and effective transfer of particle sizing methodology. To facilitate this, these reference standards must be stable upon long-term storage. Here, we examine factors that influence the properties of cross-linked albumin nanoparticles, fabricated with an ethanol desolvation method, when reconstituted from a lyophilized state. We demonstrate, with nanoparticle tracking analysis, no significant changes in mean particle diameter upon reconstitution of albumin nanoparticles fabricated with bovine serum albumin loaded with dodecanoic acid, when compared to nanoparticles fabricated with a fatty acid-free BSA. We attribute this stability to the modulation of nanoparticle charge-charge interactions at dodecanoic acid specific binding locations. Furthermore, we demonstrate this in a lyophilized state over six months when stored at − 80 °C. We also show that the reconstitution process is readily transferable between technicians and laboratories and further confirm our finding with dynamic light scattering analysis.

No abstract