Organized arrays of anisotropic nanoparticles show electronic and optical properties that originate from the coupling of shape-dependent properties of the individual nanorods. The organization of nanorods in a controllable and predictable way provides a route to the fabrication of new materials and functional devices. So far, significant progress has been achieved in the self-assembly of nanorod arrays, yet the realization of a range of different structures requires changing the surface chemistry of the nanoparticles. We organized metal nanorods in structures with varying geometries by using a striking analogy between amphiphilic ABA triblock copolymers and the hydrophilic nanorods tethered with hydrophobic polymer chains at both ends. The self-assembly was tuneable and reversible and it was achieved solely by changing the solvent quality for the constituent blocks. This approach provides a new route to the organization of anisotropic nanoparticles by using the strategies that are established for the self-assembly of block copolymers.

A systematic study on the use of 9,9-dialkylfluorene homopolymers (PFs) for large-diameter semiconducting (sc-) single-walled carbon nanotube (SWCNT) enrichment is the focus of this report. The enrichment is based on a simple three-step extraction process: (1) dispersion of as-produced SWCNTs in a PF solution; (2) centrifugation at a low speed to separate the enriched sc-tubes; (3) filtration to collect the enriched sc-SWCNTs and remove excess polymer. The effect of the extraction conditions on the purity and yield including molecular weight and alkyl side-chain length of the polymers, SWCNT concentration, and polymer/SWCNT ratio have been examined. It was observed that PFs with alkyl chain lengths of C10, C12, C14, and C18, all have an excellent capability to enrich laser-ablation sc-SWCNTs when their molecular weight is larger than ∼10 000 Da. More detailed studies were therefore carried out with the C12 polymer, poly(9,9-di-n-dodecylfluorene), PFDD. It was found that a high polymer/SWCNT ratio leads to an enhanced yield but a reduced sc-purity. A ratio of 0.5-1.0 gives an excellent sc-purity and a yield of 5-10% in a single extraction as assessed by UV-vis-NIR absorption spectra. The yield can also be promoted by multiple extractions while maintaining high sc-purity. Mechanistic experiments involving time-lapse dispersion studies reveal that m-SWCNTs have a lower propensity to be dispersed, yielding a sc-SWCNT enriched material in the supernatant. Dispersion stability studies with partially enriched sc-SWCNT material further reveal that m-SWCNTs : PFDD complexes will re-aggregate faster than sc-SWCNTs : PFDD complexes, providing further sc-SWCNT enrichment. This result confirms that the enrichment was due to the much tighter bundles in raw materials and the more rapid bundling in dispersion of the m-SWCNTs. The sc-purity is also confirmed by Raman spectroscopy and photoluminescence excitation (PLE) mapping. The latter shows that the enriched sc-SWCNT sample has a narrow chirality and diameter distribution dominated by the (10,9) species with d = 1.29 nm. The enriched sc-SWCNTs allow a simple drop-casting method to form a dense nanotube network on SiO2/Si substrates, leading to thin film transistors (TFTs) with an average mobility of 27 cm(2) V(-1) s(-1) and an average on/off current ratio of 1.8 × 10(6) when considering all 25 devices having 25 μm channel length prepared on a single chip. The results presented herein demonstrate how an easily scalable technique provides large-diameter sc-SWCNTs with high purity, further enabling the best TFT performance reported to date for conjugated polymer enriched sc-SWCNTs.

The rupture forces of individual host-guest complexes between beta-cyclodextrin (beta-CD) heptathioether monolayers on Au(111) and several surface-confined guests were measured in aqueous medium by single molecule force spectroscopy using an atomic force microscope. Anilyl, toluidyl, tert-butylphenyl, and adamantylthiols (0.2-1%) were immobilized in mixed monolayers with 2-mercaptoethanol on gold-coated AFM tips. For all guests and for all surface coverages, the force-displacement curves measured between the functionalized tips and monolayers of beta-CD exhibited single, as well as multiple, pull-off events. The histograms of the pull-off forces showed several maxima at equidistant forces, with force quanta characteristic for each guest of 39 +/- 15, 45 +/- 15, 89 +/- 15, and 102 +/- 15 pN, respectively. These force quanta were independent of the loading rate, indicating that, because of the fast complexation/decomplexation kinetics, the rupture forces were probed under thermodynamic equilibrium. The force values followed the same trend as the free binding energy Delta G degrees measured for model guest compounds in solution or on beta-CD monolayers, as determined by microcalorimetry and surface plasmon resonance measurements, respectively. A descriptive model was developed to correlate quantitatively the pull-off force values with the Delta G degrees of the complexes, based on the evaluation of the energy potential landscape of tip-surface interaction.

We report the synthesis of a new polythiophene (PT)-based molecular brush (PT-g-PDMA) by growing poly(N,N-dimethylaminoethyl methacrylate) (PDMA) chains from the PT backbone by ATRP. The polymer shows a reversible pH response in aqueous solution. A combination of AFM, light scattering, and 1 H NMR measurements indicated that the polymer brush forms a more extended conformation with a decrease in pH from 8 to 2 due to the protonation of the Me 2 N-groups and increased repulsive interactions among the PDMA side chains, which drives the red shift of the absorption and PL spectra of the PT backbone. The good solubility of this polythiophene-based brush in a wide range of solvents is attractive for the fabrication of functional polymer composites.

The nanomechanical properties of poly(N-isopropylacrylamide) (PNIPAM) and poly(acrylamide) (PAAM) in deionized water and 8 M urea aqueous solution were studied by using an atomic force microscopy based techniquessingle-molecule force spectroscopy (SMFS). Different force-extension traces were obtained in both systems. They could be normalized and superimposed, respectively. The force curves of PNIPAM and PAAM in 8 M urea aqueous solution could be fitted by extended freely jointed chain (FJC) model separately. These facts indicate that single polymer chain stretching was obtained. Moreover, the elasticities of PNIPAM and PAAM in pure water and in 8 M urea aqueous solution were compared. It is worthy to be pointed out that for PAAM in deionized water, a deviation from the extended FJC model at the middle regime (from ∼50 to 450 pN) in the force curve was found. When 8 M urea aqueous solution was used as buffer solution, the deviation disappeared and the force curve could be fitted with extended FJC model. This result may be related to the fact that PAAM could form certain intramolecular hydrogen bonding in water. After the PNIPAM sample was heated to 33 °C, above its LCST, more signals were observed in one stretching. This could be attributed to the fact that polymer chains form more contact points with the glass substrate after thermal treatment. In addition, another way just different from the normal one to do the SMFS experiment was also provided.

Exploring the fine structures and physicochemical properties of physiologically relevant membranes is crucial to understanding biological membrane functions including membrane mechanical stability. We report a direct correlation of the self-organized structures exhibited in phase-segregated supported lipid bilayers consisting of dioleoylphosphatidylcholine/egg sphingomyelin/cholesterol (DEC) in the absence and presence of ceramide (DEC-Ceramide) with their nanomechanical properties using AFM imaging and high-resolution force mapping. Direct incorporation of ceramide into phase-segregated supported lipid bilayers formed ceramide-enriched domains, where the height topography was found to be imaging setpoint dependent. In contrast, liquid ordered domains in both DEC and DEC-Ceramide presented similar heights regardless of AFM imaging settings. Owing to its capability for simultaneous determination of the topology and interaction forces, AFM-based force mapping was used in our study to directly correlate the structures and mechanical responses of different coexisting phases. The intrinsic breakthrough forces, regarded as fingerprints of bilayer stability, along with elastic moduli, adhesion forces, and indentation of the different phases in the bilayers were systematically determined on the nanometer scale, and the results were presented as two-dimensional visual maps using a self-developed code for force curves batch analysis. The mechanical stability and compactness were increased in both liquid ordered domains and fluid disordered phases of DEC-Ceramide, attributed to the influence of ceramide in the organization of the bilayer, as well as to the displacement of cholesterol as a result of the generation of ceramide-enriched domains. The use of AFM force mapping in studying phase segregation of multicomponent lipid membrane systems is a valuable complement to other biophysical techniques such as imaging and spectroscopy, as it provides unprecedented insight into lipid membrane mechanical properties and functions.

Cholesterol is involved in endocytosis, exocytosis, and the assembly of sphingolipid/cholesterol-enriched domains, as has been demonstrated in both model membranes and living cells. In this work, we explored the influence of different cholesterol levels (5-40 mol%) on the morphology and nanomechanical stability of phase-segregated lipid bilayers consisting of dioleoylphosphatidylcholine/sphingomyelin/cholesterol (DOPC/SM/Chol) by means of atomic force microscopy (AFM) imaging and force mapping. Breakthrough forces were consistently higher in the SM/Chol-enriched liquid-ordered domains (Lo) than in the DOPC-enriched fluid-disordered phase (Ld) at a series of loading rates. We also report the activation energies (DeltaEa) for the formation of an AFM-tip-induced fracture, calculated by a model for the rupture of molecular thin films. The obtained DeltaEa values agree remarkably well with reported values for fusion-related processes using other techniques. Furthermore, we observed that within the Chol range studied, the lateral organization of bilayers can be categorized into three distinct groups. The results are rationalized by fracture nanomechanics of a ternary phospholipid/sphingolipid/cholesterol mixture using correlated AFM-based imaging and force mapping, which demonstrates the influence of a wide range of cholesterol content on the morphology and nanomechanical stability of model bilayers. This provides fundamental insights into the role of cholesterol in the formation and stability of sphingolipid/cholesterol-enriched domains, as well as in membrane fusion.

We report on the application of the time-temperature superposition principle to supramolecular bond-rupture forces on the single-molecule level. The construction of force-loading rate master curves using atomic force microscopy (AFM)-based single-molecule force spectroscopy (SMFS) experiments carried out in situ at different temperatures allows one to extend the limited range of the experimentally accessible loading rates and hence to cross from thermodynamic nonequilibrium to quasi-equilibrium states. The approach is demonstrated for quadruple H-bonded ureido-4[1H]-pyrimidinone (UPy) moieties studied by variable-temperature SMFS in organic media. The unbinding forces of single quadruple H-bonding (UPy)2 complexes, which were identified based on a polymeric spacer strategy, were found to depend on the loading rate in the range of 5 nN/s to 500 nN/s at 301 K in hexadecane. By contrast, these rupture forces were independent of the loading rate from 5 to 200 nN/s at 330 K. These results indicate that the unbinding behavior of individual supramolecular complexes can be directly probed under both thermodynamic nonequilibrium and quasi-equilibrium conditions. On the basis of the time-temperature superposition principle, a master curve was constructed for a reference temperature of 301 K, and the crossover force (from loading-rate independent to -dependent regimes) was determined as approximately 145 pN (at a loading rate of approximately 5.6 nN/s). This approach significantly broadens the accessible loading-rate range and hence provides access to fine details of potential energy landscape of supramolecular complexes based on SMFS experiments.