Excessive consumption of mobile phones, a decrease in their life time and, therefore, an increase in the generation of this type of electronic scrap, is noted in recent years. Printed circuit boards (PCB's) from waste cell phones are attractive resources because of the valuable metals Cu, Au, Ag, Pd they possess, but at the same time dangerous due to their content of heavy metals. The treatment of these boards is desirable from an economic and environmental perspective. In this paper we inform the results achieved on laboratory leaching of gold contained in PCB's from cell phones. The reagents used were ammonium thiosulfate in basic medium and thiourea in sulfuric acid solution. Prior to gold leaching, the plates were subjected to grinding to reduce their size to less than 2 mm and to an oxidizing leaching in sulfuric acid solution to separate the copper. The conditions studied in the leaching test were: thiosulfate molar concentration between 0.08 M and 0.12 M and ammonium hydroxide from 0.1 M to 0.2 M, temperature of 20° C, pH = 10.5 and 15 mM of cupric ion. In thiourea leaching, gold dissolution was studied by varying the concentration of the reagent between 20 g/l to 28 g/l. The results indicate that, under the conditions studied, ammonium thiosulfate is a more effective reagent for the dissolution of gold than thiourea. The gold dissolution values achieved were up 70% for thiosulfate and no greater than 40% for thiourea.
RESUMEN Se ha propuesto el uso de titanio poroso para reducir el problema de incompatibilidad mecánica que ocurre entre el implante y el hueso. La introducción de poros en el titanio disminuye su módulo elástico acercándolo al que poseen tanto los huesos corticales como trabeculares. En este trabajo se investigó la fabricación por pulvimetalurgia de titanio con gradiente de porosidad longitudinal, usando carbonato ácido de amonio como material espaciador, mezclado en distintas proporciones con hidruro de titanio en polvo. Luego de la compactación uniaxial por capas y posterior sinterización a 1150 ºC, se obtuvieron muestras cilíndricas con porosidad longitudinal gradual de proporciones 2 % - 30 %, 2 % - 60 %, 30 % - 60 % y 2 % - 30 % - 60 %. Se analizó la microestructura; tamaño, forma y distribución de poros, así como el módulo de elasticidad y límite de fluencia. Los resultados indican que, mediante el método estudiado, es posible obtener muestras sinterizadas con porosidad gradual, con continuidad estructural entre las distintas capas porosas, con un rango de tamaño de poro entre 200 y 250 µm. Los valores de módulo de elasticidad obtenidos fueron similares a los informados en la bibliografía para los huesos corticales y son compatibles con la estructura anisotrópica del tejido óseo.
RESUMENLa recuperación de metales valiosos (como el Cu, Au, Ag, Pt, Pd, etc.), contenidos en las placas de circuito impreso (PCB's) provenientes de chatarra electrónica, mediante vías hidrometalúrgicas alternativas a las actualmente empleadas en la minería, constituye el principal objetivo del grupo de investigación.Una de las mayores dificultades que enfrentan los investigadores del proyecto, radica en la falta de disponibilidad de una técnica adecuada, simple, confiable y rápida para la determinación cuantitativa y cualitativa de dichos valores metálicos contenidos en las soluciones experimentales.En este trabajo se informan los resultados preliminares obtenidos al llevarse a cabo distintas experiencias de laboratorio orientadas a la construcción y calibración de curvas patrones para la determinación de oro, a partir de la espectrofotometría de absorción UV-Visible. Tales experiencias se realizaron mediante el empleo de oro puro disuelto en una solución de agua regia (preparada con tres partes de HCl y una de HNO 3 ), la ulterior extracción del mismo con un solvente orgánico (metil-isobutil-cetona o MIBK) y la observación en el espectrofotómetro de las soluciones orgánicas diluidas. En esta última etapa se han tenido en cuenta tanto espectros de absorción directa como derivativa de segundo orden. Además, se ha comprobado la aplicabilidad de la técnica de análisis en muestras trituradas de PCB's.Los resultados obtenidos indican que es posible la construcción de una curva patrón utilizando longitudes de onda en torno a los 332 nm y el método se puede llevar a cabo con muestras de tarjetas electrónicas trituradas. Palabras clave: Espectrofotometría, oro, RAEE, MIBK, calibración ABSTRACTThe main objective of the research group is the recovery of valuable metals (contained in PCB's) such as Cu, Au, Ag, Pt, Pd, etc., by hydrometallurgical alternatives to the current ones used in mining. One of the biggest difficulties that has encountered the research group is the lack of availability of an adequate, simple and reliable quantitative and qualitative determination technique of such metal values contained in the experimental technical solutions. This paper presents the preliminary results obtained in carrying out various laboratory experiments aimed at building calibration curves and patterns to determine gold contents by UV/VIS absorption spectrophotometry technique. These experiments where carried on by dissolution of pure gold in an aqua regia solution (made with three parts of HCl per each of HNO 3 ). Afterwards, the gold was extracted from the aqueous solution by an organic solvent (methyl-isobutyl-ketone or MIBK) and diluted solutions were analyzed with the spectrophotometer. Both direct absorbance spectra and second order derivative spectra were taken into consideration. Besides, it was evaluated the feasibility of applying this analysis technique on shredded samples of PCB's.The results showed that it is possible the construction of a standard curve using wavelengths around 332 nm and the analytical method is a...
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.