This paper describes a subassemblage seismic test program performed on six buckling-restrained braces (BRBs). Two different brace core segment lengths and two different buckling-restraining mechanisms were examined. The applied loading histories included a qualifying quasi-static cyclic test with stepwise incremental displacement amplitudes and a dynamically applied seismic loading. A test was also carried out on a conventional bracing member for comparison purposes. The concrete-filled tube specimens exhibited satisfactory performance under the quasi-static loading protocol, regardless of the length of the core segment. Strain hardening and frictional responses resulted in brace axial forces significantly exceeding the core yield capacity. The steel BRB system exhibited good performance under the quasi-static and dynamic loading sequences, provided that the clearance between the brace core and the buckling-restrained mechanism was kept to a minimum. The dynamic loading protocol was less severe for low-cycle fatigue than the quasi-static loading, but higher strain rates resulted in amplified yield resistance. The conventional bracing member withstood the entire quasi-static loading history but exhibited limited energy-dissipation capacity compared with the concrete-filled BRBs.Key words: concentrically braced steel frames, bracing members, buckling, energy dissipation, friction, yielding, fracture, seismic.
Mechanical metamaterials exhibit unusual properties through the shape and movement of their engineered subunits. This work presents a new investigation of the Poisson’s ratios of a family of cellular metamaterials based on Kirigami design principles. Kirigami is the art of cutting and folding paper to obtain 3D shapes. This technique allows us to create cellular structures with engineered cuts and folds that produce large shape and volume changes, and with extremely directional, tuneable mechanical properties. We demonstrate how to produce these structures from flat sheets of composite materials. By a combination of analytical models and numerical simulations we show how these Kirigami cellular metamaterials can change their deformation characteristics. We also demonstrate the potential of using these classes of mechanical metamaterials for shape change applications like morphing structures.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.