An easy, selective, and sensitive method has been developed for the determination of enrofloxacin (ENR) and its main active metabolite, ciprofloxacin (CIP), in raw bovine milk using CE with UV detection at 268 nm. Milk samples were prepared by a clean-up/extraction procedure based on protein precipitation with hydrochloride acid followed by being defatted by centrifugation and SPE using a hydrophilic-lipophilic balance cartridge. Optimum separation was obtained using a 50 mM phosphoric acid at pH 8.4 and the total electrophoretic run time was 6 min. Sample preparation by this method yielded clean extracts with quantitative and consistent mean recoveries from 89 to 97% for CIP and from 93 to 98% for ENR. LODs obtained were lower to the maximum residue limits for these fluoroquinolones. The precision of the ensuing method is acceptable; thus, the RSD for peak area and migration time was less than 8.5 and 0.5% for CIP and 9.9 and 0.9% for ENR, respectively. The results showed that the proposed method was efficient showing good recoveries, sensitivity, and precision for the studied compounds and could be satisfactorily applied in routine analysis for the monitoring of ENR and CIP residues in milk, due to its ruggedness and feasibility demonstrated.

CE has generated considerable interest in the research community since instruments were introduced by different trading companies in the 1990s. Nowadays, CE is popular due to its simplicity, speed, highly efficient separations and minimal solvent and reagent consumption; it can also be included as a useful technique in the nanotechnology field and it covers a wide range of specific applications in different fields (chemical, pharmaceutical, genetic, clinical, food and environmental). CE has been very well evaluated in research laboratories for several years, and different new approaches to improve sensitivity (one of the main drawbacks of CE) and robustness have been proposed. However, this technique is still not well accepted in routine laboratories for food analysis. Researching in data bases, it is easy to find several electrophoretic methods to determine different groups of analytes and sometimes they are compared in terms of sensitivity, selectivity, precision and applicability with other separation techniques. Although these papers frequently prove the potential of this methodology in spiked samples, it is not common to find a discussion of the well-known complexity of the matrices to extract analytes from the sample and/or to study the interferences in the target analytes. Summarizing, the majority of CE scientific papers focus primarily on the effects upon the separation of the analytes while ignoring their behavior if these analytes are presented in real samples.

No abstract

No abstract

A sensitive and reliable method based on MEKC has been developed and validated for trace determination of neonicotinoid insecticides (thiamethoxam, acetamiprid, and imidacloprid) and the metabolite 6-chloronicotinic acid in water and soil matrices. Optimum separation of the neonicotinoid insecticides was obtained on a 58 cm long capillary (75 μm id) using as the running electrolyte 40 mM SDS, 5 mM borate (pH 10.4), and 5% (v/v) methanol at a temperature of 25°C, a voltage of 25 kV and with hydrodynamic injection (10 s). The analysis time was less than 7 min. Prior to MEKC determination, the samples were purified and enriched by carrying out extraction-preconcentration steps. For aqueous samples, off-line SPE with a sorptive material such as Strata-X (polymeric hydrophobic sorbent) and octadecylsilane (C₁₈) was carried out to clean up and preconcentrate the insecticides. However, for soil samples, matrix solid-phase dispersion (MSPD) was applied with C₁₈ used as the dispersant. Good linearity, accuracy, and precision were obtained and the detection limits were in the range between 0.01 and 0.07 μg mL⁻¹ for river water and 0.17 and 0.37 μg g⁻¹ for soil samples. Recovery levels reached greater than 92% for all of the assayed neonicotinoids in river water samples with Strata-X. In soil matrices, the best recoveries (63-99%) were obtained with MSPD.

Con el objetivo de determinar el aporte en nutrientes digestibles para cerdos de dos tipos de sorgo procesados por distintos métodos, se realizó una prueba de digestibilidad fecal aparente (DFA) con cerdos en recría. Se estudiaron seis dietas: T1: maíz molido (MM); T2: sorgo alto tanino (SAT) molido (SATM); T3: SAT extrusado (SATE); T4: silo de grano húmedo de SAT (SSAT); T5: sorgo de bajo tanino (SBT) molido (SBTM); T6: silo de grano húmedo de SBT (SSBT). Se utilizaron 18 cerdos, tres por tratamiento, con un peso promedio de 36,5 kg, alojados en jaulas de digestibilidad individuales. El periodo experimental comprendió siete días de acostumbramiento y cinco de recolección de heces. Se suministraron dos tomas diarias iguales, de una cantidad de materia seca equivalente el 6 % del peso metabólico corporal. Se realizó recolección total de heces. Se determinó la DFA de materia seca (MS), materia orgánica (MO), proteína cruda (PC) y energía bruta (EB). Se estimó el aporte en base seca

No abstract

No abstract