A laboratory test was undertaken to evaluate the interfacial frictional characteristics of cortical and cancellous bone, as well as a novel porous tantalum biomaterial (Hedrocel ® , Implex Corp.). Three sets of tests were conducted to measure the friction coefficients of (1) bovine cancellous bone against bovine cortical bone; (2) net-shape formed porous tantalum against bovine cortical and cancellous bone; and (3) electron-discharge-machine formed (EDM'd) porous tantalum against bovine cortical and cancellous bone. The bovine cortical bone was tested in three conditions: periosteum-intact, periosteum-denuded and surface-flattened. An inclined plane apparatus was used to determine the coefficients of friction. By gradually increasing the substrate tilt, the angle of slippage was determined, and the friction coefficient was calculated.The average friction coefficients of cancellous bone against periosteum-intact, periosteum-denuded and surface-flattened cortical bone were 0.91 ± 0.14, 0.61 ± 0.07 and 0.58 ± 0.06, respectively. Porous tantalum specimens prepared from a preshaped vitreous carbon skeleton, when tested against periosteum-intact, periosteum-denuded and surface-flattened cortical bone, and against cancellous bone, had average friction coefficients of 1.10 ± 0.18, 0.82 ± 0.15, 0.86 ± 0.11, and 0.98 ± 0.17, respectively. Porous tantalum specimens prepared by electron-discharge machining, when tested against periosteum-intact cortical bone, periosteum-denuded cortical bone and cancellous bone, had average friction coefficients of 1.75 ± 0.33, 0.74 ± 0.07, and 0.88 ± 0.09, respectively. The friction coefficient of the porous tantalum material was very high in comparison to natural bone autografts or allografts, and to conventional orthopedic implant coating materials (sintered beads and wire mesh). Other factors being equal, this high-friction characteristic would be expected to translate into higher initial stability of a porous tantalum implant, as compared to natural bone grafts.
This study evaluated a porous tantalum biomaterial (Hedrocel) designed to function as a scaffold for osseous ingrowth. Samples were characterized for structure, Vickers microhardness, compressive cantilever bending, and tensile properties, as well as compressive and cantilever bending fatigue. The structure consisted of regularly arranged cells having struts with a vitreous carbon core with layers of CVI deposited crystalline tantalum. Microhardness values ranged from 240-393, compressive strength was 60 +/- 18 MPa, tensile strength was 63 +/- 6 MPa, and bending strength was 110 +/- 14 MPa. The compressive fatigue endurance limit was 23 MPa at 5 x 10(6) cycles with samples exhibiting significant plastic deformation. SEM examination showed cracking at strut junctions 45 degrees to the axis of the applied load. The cantilever bending fatigue endurance limit was 35 MPa at 5 x 10(6) cycles, and SEM examination showed failure due to cracking of the struts on the tension side of the sample. While properties were variable due to morphology, results indicate that the material provides structural support while bone ingrowth is occurring. These findings, coupled with the superior biocompatibility of tantalum, makes the material a candidate for a number of clinical applications and warrants further and continued laboratory and clinical investigation.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.