The lead‐free solder joint reliability of several printed circuit board mounted high‐density packages, when subjected to temperature cycling was investigated by finite element modelling. The packages were a 256‐pin plastic ball grid array (PBGA), a 388‐pin PBGA, and a 1657‐pin ceramic column grid array. Emphasis was placed on the determination of the creep responses (e.g. stress, strain, and strain energy density) of the lead‐free solder joints of these packages.

Temperature cycling tests, and statistical analysis of the results, for various high‐density packages on printed‐circuit boards with Sn‐Cu hot‐air solder levelling, electroless nickel‐immersion gold, and organic solder preservative finishes are investigated in this study. Emphasis is placed on the determination of the life distribution and reliability of the lead‐free solder joints of these high‐density package assemblies while they are subjected to temperature cycling conditions. A data acquisition system, the relevant failure criterion, and the data extraction method will be presented and examined. The life test data are best fitted to the Weibull distribution. Also, the sample mean, population mean, sample characteristic life, true characteristic life, sample Weibull slope, and true Weibull slope for some of the high‐density packages are provided and discussed. Furthermore, the relationship between the reliability and the confidence limits for a life distribution is established. Finally, the confidence levels for comparing the quality (mean life) of lead‐free solder joints of high‐density packages are determined.

The High Density Packaging Users Group conducted a substantial study of the solder joint reliability of high‐density packages using lead‐free solder. The design, material, and assembly process aspects of the project are addressed in this paper. The components studied include many surface mount technology package types, various lead, and printed circuit board finishes and paste‐in‐hole assembly.

Failure analyses of the lead‐free and SnPb solder joints of high‐density packages such as the plastic ball grid array and the ceramic column grid array soldered on SnCu hot‐air solder levelling electroless nickel‐immersion gold or NiAu, and organic solderability preservative Entek printed circuit boards are presented. Emphasis is placed on determining the failure locations, failure modes, and intermetallic compound composition for these high‐density packages' solder joints after they have been through 7,500 cycles of temperature cycling. The present results will be compared with those obtained from temperature cycling and finite element analysis.

No abstract