AbstrakPenelitian ini bertujuan untuk mengetahui pengaruh penyisipan logam tembaga (Cu) dengan berbagai variasi massa terhadap struktur morfologi dan komposisi bahan pada permukaan, absorbansi, resistansi, dan performansi sel surya berbasis titania. Preparasi lapisan titania-tembaga menjadi bentuk pasta dilakukan dengan metode sol-gel. Pasta titania-tembaga dideposisikan pada elektroda transparan dengan metode doctor blade. Dilakukan lima variasi massa Cu yang disisipkan pada lapisan titania, yaitu 0,050 gram; 0,075 gram; 0,100 gram; 0,0125 dan 0,0150. Masing-masing variasi massa Cu disisipkan pada 1 gram TiO2. Karakterisasi SEM dan EDS dilakukan pada lapisan titania-tembaga untuk mengetahui struktur morfologi dan komposisi bahan lapisan. Absorbansi lapisan dikarakterisasi menggunakan UV-Visible spektrometer. Pengukuran resistansi lapisan dilakukan dengan Jembatan Wheatstone. Sedangkan performansi sel surya dilakukan dengan mengukur tegangannya. Berdasarkan hasil SEM, butiran yang terbentuk pada lapisan TiO 2 dan TiO 2 -Cu relatif sama. Hasil EDS memperlihatkan bahwa komposisi bahan pada lapisan TiO 2 -Cu sampel 5, yaitu lapisan unsur Ti sebanyak 59,98 %, unsur O sebanyak 40,05 % dan unsur Cu sebanyak 0,07%. Absorbansi lapisan aktif TiO 2 terjadi dari panjang gelombang 200 nm-382 nm dan 649 nm-800 nm. Absorbansi lapisan aktif TiO 2 Cu terjadi dari panjang gelombang 200 nm-381 nm dan 649 nm-800 nm. Penambahan Cu pada lapisan aktif TiO 2 meningkatkan sifat absorbansi dari lapisan aktif titania. Penyisipan logam Cu pada lapisan titania dapat menurunkan resistansi listrik lapisan. Lapisan titania tanpa disisipi Cu memiliki nilai resistansi sebesar 3190,602 Ω. Tembaga yang disisipkan pada lapisan aktif TiO 2 mempengaruhi tegangan yang dihasilkan oleh sel surya berbasis titania.
AbstrakPenelitian ini bertujuan untuk mengetahui nilai viskositas kinematik pelumas sepeda motor yang sudah terpakai pada berbagai variasi suhu dan jarak pemakaian dan nilai viskositas kinematik pelumas mobil yang sudah terpakai pada berbagai variasi suhu dan jarak pemakaian.Viskositas zat cair, dalam hal ini adalah pelumas kendaraan bermotor, dapat ditentukan menggunakan viskometer Redwood .Dengan menggunakan viskometer Redwood, dapat dilakukan pengukuran waktu alir yang diperlukan oleh 50 ml sampel pada suhu konstan. Waktu hasil pengukuran tersebut dikenal dengan Redwood's sec atau viskositas konvensional. Dari viskositas konvensional dapat ditentukan nilai viskositas kinematik. Untuk pelumas sepeda motor dilakukan pengukuran viskositas pada suhu 30 0 C, 50 0 C, 65 0 C dan 100 0 C, dengan variasi jarak pemakaian 0 Km, 5 Km, 10 Km, 15 Km dan 20 Km. Untuk pelumas mobil dilakukan pengukuran viskositas pada suhu 30 0 C, 50 0 C, 65 0 C dan 100 0 C, dengan variasi jarak pemakaian 0 Km, 1000 Km, 5000 Km, dan 10000 Km. Nilai viskositas pelumas sepeda motor pada suhu 100 0 C adalah 9,54 m 2 /s (pelumas baru), 1,15 m 2 /s (pemakaian 5 Km), 5,86 m 2 /s (pemakaian 10 Km), 8,02 m 2 /s (pemakaian 15 Km), dan 9,11 m 2 /s (pemakaian 20 Km). Nilai viskositas pelumas mobil pada suhu 100 0 C adalah 6,73 m 2 /s (pelumas baru), 7,89 m 2 /s (pemakaian 1000 Km), 6,0 m 2 /s (pemakaian 5000 Km), dan 7,55 m 2 /s (pemakaian 10000 Km). AbstractThis study aims to determine the value of the kinematic viscosity lubricants motorcycle that has been used at various temperatures and the use of distance. This study also aims to remedy mengtahui how the value of the kinematic viscosity of the lubricant car that has been used in a wide range of temperature variation and distance usage. Viscosity liquid, in this case is the lubricants, can be determined using the Redwood viscometer By using Redwood viscometer, can be measured flow time required by 50 ml of the sample at a constant temperature. Time measurement result is known as the Redwood's sec or conventional viscosity. Conventional viscosity can be determined from the kinematic viscosity values. For motorcycle lubricant viscosity measured at a temperature
Sintesis dan karakterisasi nanopartikel magnetit (Fe3O4) yang berbasis pasir besi Pantai Glagah, Kulon Progo telah berhasil dilakukan. Sintesis magnetit (Fe3O4) dilakukan dengan metode kopresipitasi pada berbagai variasi konsentrasi larutan pengendap NH4OH (10%, 15%, 20%, dan 25%). Karakterisasi XRD, SEM EDS, dan VSM dilakukan untuk mengetahui pengaruh variasi konsentrasi larutan pengendap NH4OH terhadap struktur mikro dan sifat kemagnetan bahan magnetit (Fe3O4). Berdasarkan hasil XRD, variasi konsentrasi larutan pengendap NH4OH tidak mempengaruhi nilai parameter kisi dan struktur kristal sampel Fe3O4 yang terbentuk, tetapi mempengaruhi ukuran kristal yang terbentuk. Hasil SEM EDS menunjukkan bahwa struktur morfologi permukaan sampel 2 (Fe3O4 dengan konsentrasi larutan pengendap NH4OH 15%) cukup homogen serta memiliki komposisi kimia bahan yang terdiri dari Fe sebanyak 49,33%, O sebanyak 27,90% dan sisanya merupakan unsur pengotor. Hasil VSM menunjukkan bahwa sampel 2 (NH4OH 15%) memiliki magnetisasi saturasi (Ms) = 25,7 emu/g, magnetisasi remanen (Mr) = 0,06 emu/g, dan medan koersivitas (Hc) = 0,023 T. Sedangkan sampel 4 (NH4OH 25%) memiliki nilai magnetisasi saturasi (Ms) = 23,6 emu/g, magnetisasi remanen (Mr) = 2,02 emu/g, dan medan koersivitas (Hc) = 0,019 T. Kedua sampel tersebut tergolong soft magnetic material.
Nanopartikel Fe3O4 yang berasal dari pasir besi pantai Glagah Kulon Progo telah berhasil disintesis menggunakan metode kopresipitasi dengan berbagai variasi konsentrasi HCl (10%, 15%, 25% dan 37%). Pengaruh konsentrasi HCl terhadap mikrostruktur dan sifat kemagnetan dari Fe3O4 dilihat dengan menggunakan XRD, SEM EDX serta VSM. Hasil XRD menunjukkan bahwa Fe3O4 yang dihasilkan memiliki struktur kristal kubik invers spinel. Semakin besar konsentrasi HCl, semakin baik derajat kristalinitasnya. Hasil SEM EDX untuk sampel Fe3O4 dengan konsentrasi HCl 37% menunjukkan ukuran butir (grain) yang hampir sama serta tingkat kemurnian sampel Fe3O4 yang dihasilkan sebesar 100% (Fe 72,42% dan O 27,58%). Hasil VSM menunjukkan Fe3O4 hasil sintesis memiliki sifat superparamagnetik serta bersifat soft magnetic. Nanopartikel Fe3O4 dengan konsentrasi HCl 25% memiliki Hc, Mr dan Mmax masing-masing sebesar 0,0215 T, 11,60 emu/gr dan 36,51 emu/gr. Sedangkan Nanopartikel Fe3O4 dengan konsentrasi HCl 37% memiliki Hc dan Mr yang lebih kecil yaitu masing-masing sebesar 0,0017 T dan 10,83 emu/gr serta Mmax yang lebih besar yaitu 36,82 emu/gr.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.