Kota Malang adalah adalah kota yang terkenal dengan julukan kota pendidikan, kota wisata, kota surga kuliner, kota dingin, kota sejuk, dan kota bunga. Begitu banyak julukan yang mampu menghipnotis warga dari luar kota untuk hadir dikota Malang. Warga kota malang yang rata-rata tinggal di perumahan tentu saja hanya mempunyai lahan yang terbatas untuk bercocok tanam guna memenuhi kebutuhan keluarga pada khususnya. Solusinya adalah berkebun pada lahan terbatas dengan metode polybag atau cara hidroponik. Informasi tentang perkembangan sistem hidroponik di Indonesia masih sangat minim, hal ini disebabkan oleh kurangnya penyuluhan tentang kelebihan sistem hidroponik pada lahan sempit. Dari sisi ekonomi cukup murah, secara teknis pembuatan media tanam hidroponik cukup mudah. Oleh sebab itu kegiatan pengabdian ini dilaksanakan sebagai langkah awal untuk mendukung warga dalam meningkatkan kehidupan masyarakat terutama ekonomi dan kesehatan melalui pelatihan, penyuluhan dan praktek tentang bertanam hidroponik dari pengolahan sampai pemasarannya. Harapan kedepan tidak saja dapat memenuhi kebutuhan keluarga tetapi juga dapat memenuhi kebutuhan pasar disekitar wilayah RT 06 & RT 07 RW05 kelurahan Arjosari serta dapat menjadi motivasi lingkungan sekitarnya untuk melaksanakan kelanjutan kegiatan positif seperti ini.
Pecan shell is an abundant amount of biomass waste and has the potential as one of the fuels, with a very hard texture and having holocellulose content of 49.22% and lignin 54.46%. Whereas the pecan shell composition after in the form of 100 mesh powder was 33% hemicellulose, 17% cellulose and 34% lignin. In order to be used as an alternative fuel, one of the initial stages that needs to be carried out is through the process of degradation of lignin or the delignification of components present in pecan shells.The process of concentration and microwave process time at microwave power 440 Watts was successfully degraded through a combination of chemical and physical processes with variables of NaOH. The NaOH concentrations used were 1N, 2N, and 3N while the delignification times were 5, 10, 15, 20, and 25 minutes. From the analysis with the Chesson method, the lowest lignin levels reached 6% at 2N NaOH concentration and 20 minutes process time. With the data generated, it can be concluded that the process of combination of chemistry and physics can reduce lignin levels in pecan shell powder by 82.35%
Proses interesterifikasi yang telah dilakukan menggunakan katalis homogen maupun heterogen yang perlu proses pemisahan di akhir reaksi. Minyak atsiri merupakan alternatif pilihan katalis yang lebih efisien sebab tidak perlu proses pemisahan di akhir reaksi karena berfungsi sebagai antioksidan untuk biodiesel dan lebih ramah lingkungan. Tujuan penelitian adalah untuk mendapatkan proses pembuatan biodiesel yang lebih efektif dan efisien yaitu dengan tahapan proses yang lebih sedikit sehingga akan mengurangi biaya produksi. Pada penelitian ini reaksi interesterifikasi minyak kelapa sawit dengan metil asetat untuk menghasilkan metil ester dan triasetin, dilakukan dengan bio-katalis minyak kayu putih. Kondisi operasi penelitian adalah massa minyak kelapa sawit 250 gram, rasio molar minyak kelapa sawit:metil asetat adalah 1:6, suhu reaksi 60oC, kecepatan pengadukan 300 rpm, massa katalis 0,75% massa minyak kelapa sawit dan waktu reaksi (15, 30, 45, 60, dan 75 menit). Minyak kelapa sawit, metil asetat dan katalis direaksikan dalam labu leher tiga sebagai reaktor sesuai dengan kondisi operasi penelitian. Setelah waktu reaksi tercapai, sample sebanyak 50 gram diambil untuk dilakukan proses pemisahan. Hasil penelitian mendapatkan kondisi terbaik proses interesterifikasi minyak kelapa sawit dengan bio-katalis minyak kayu putih pada waktu reaksi 75 menit dengan crude yield 65,88% dan angka asam 0,426 mg KOH/gr sampel yang memenuhi SNI 7182:2015.
Biodiesel adalah bahan bakar terbarukan yang prospek untuk dikembangkan saat ini. Seiring dengan mahalnya harga minyak kelapa sawit, maka bahan baku biodiesel beralih ke minyak non pangan. Minyak jarak pagar adalah bahan baku yang sangat potensial karena termasuk non edible oil. Proses transesterifikasi untuk pembuatan biodiesel dari minyak jarak pagar dengan katalis KOH yang selama ini dilakukan belum mendapatkan hasil yang memuaskan ditinjau dari kinetika reaksi. Tujuan penelitian adalah mendapatkan data kinetika reaksi transesterifikasi trigliserida dari minyak jarak pagar dengan katalis KOH dengan variabel suhu dan waktu reaksi. Penelitian meliputi tahap degumming, reaksi esterifikasi dan reaksi transesterifikasi. Konsentrasi FAME yang didapat dari reaksi transesterifikasi digunakan sebagai data untuk menghitung kinetika reaksi. Kondisi optimum penelitian mendapatkan konsentrasi FAME 99,52% pada reaksi transesterifikasi minyak jarak pagar dengan katalis KOH pada suhu reaksi 60⁰C dan waktu reaksi 45 menit. Reaksi transesterifikasi minyak jarak pagar dengan katalis KOH merupakan reaksi orde 2 dengan nilai k pada suhu 30⁰C-60⁰C adalah 0,008 – 0,015 L³/mol.menit serta Ea adalah 4239,49 kal/mol.
<span lang="EN-US">Bio briquette is a source of energy derived from biomass and can be used as a solid fuel instead of petroleum and other energy derived from fossils. Bio briquettes are one of the alternative solutions that are quite effective and efficient in dealing with the crisis of energy sources, one of which is by optimizing the pecan shell or shell of Aleurites moluccana as a bio briquette. Pecan shell is a waste that is very abundant in Indonesia and can be used as a solid fuel that is environmentally friendly and has a high calorific value. The purpose of this study was to determine the influence of microwave electromagnetic waves on the bio briquette quality of pecan shells through power variants and the duration of carbonization time. The stages are pecan shell cleaning, carbonization process with microwave electromagnetic waves at predetermined power and duration of time (0.5, 1, 1.5 and, 2 hours), the process of crushing into charcoal with disk mill equipment, mixing with adhesive material with a ratio between the mass of charcoal and adhesive material 80:20 (b/b), bio briquette printing and the last stage is drying with sunlight for 2 days. From the analysis obtained the most optimum results are at 440 watts of power for 1 hour with the following results: water content of 7.30%, ash content: 7.48%, Carbon Bound obtained: 73.31%, Volatile matter: 30.23% and, the calorific value of bio briquette is: 5706.24816 cal/gram</span>
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.