Bio charcoal is one type of fuel in the form of charcoal made from various kinds of biological or biomass material, which includes agricultural waste, forestry waste, agro-industrial waste, animal waste from livestock waste. Bio charcoal is produced from the carbonization process or the charcoal process of materials containing carbon (biomass). One of the biomass that has the potential to be used as raw material for bio charcoal is poultry manure originating from poultry livestock waste. The composition of poultry livestock waste (chicken manure) is crude protein by 9.97-12.67% and crude fiber by 30.36-32.65. This study aims to determine the optimal carbonization temperature and particle size in the carbonization process so that optimal Fixed Carbon level can be obtained by using variations in the size of Chicken Manure Particles, namely: 30 mesh, 40 mesh, 50 mesh, and Charcoal temperature: 200, 225, 250, 275 and 300° C. Stages of the process carried out is drying chicken manure to the weight of constant chicken manure (water content < 10%) and then mashed and sieved to sizes of 30, 40, and 50 mesh and the last stage is the charcoal process of chicken manure with variations in temperature of 200, 225, 250, 275, and 300° C until the perfect charcoal process. From this study, the best parameter is obtained at 350° C and 50 mesh particle size with 45% Fixed Carbon content, 3.26% moisture content, 41% ash content, and volatile matter content 22%.
: This study is expected to provide opportunities for the food industry that is closely related to the development of new products and increase the selling value of the moringa leaves in the form of antioxidants instant drink. This is because a lot of active substances are contained in the moringa leaves (moringa oleifera) one of them is quercetin. Quercetinis an antioxidant compound that can neutralize free radicals and prevent damage caused by free radicals to normal cells, proteins, and fats. Antioxidants are also defined as compounds that protect cells from harmful effects of reactive oxygen free radicals. The purpose of this research is processing moringa leaf into an antioxidant instant drink of high nutritional value and demanded by consumers. The method used is the experimental method in the laboratory. Using variation variablesof addition of tween 80 0,5ml, 0,75 ml, 1 ml, 1,25 ml, 1,5 ml) and variation of drying temperature (40 o C, 45 o C, 50 o C, 55 o C, 60⁰C) using the method of foaming drying to determine the effect on the making of antioxidant instant drink from moringa leaves with optimal quality to produce instant drinks rich of natural antioxidants and durable.The results showed that the best drying temperature is60⁰Cand addition of tween 80 volume as much as 1.5 ml, with result of analysis that is 1,67%water content, 89,83%solubility. While when viewed from the total quercetin and total antioxidant activity, the best temperature is at 40 o Cand the addition of 80 ml tween volume of total quercetin 230.96 ppm and total antioxidant activity of 395,710 ppm.
Kota Malang adalah adalah kota yang terkenal dengan julukan kota pendidikan, kota wisata, kota surga kuliner, kota dingin, kota sejuk, dan kota bunga. Begitu banyak julukan yang mampu menghipnotis warga dari luar kota untuk hadir dikota Malang. Warga kota malang yang rata-rata tinggal di perumahan tentu saja hanya mempunyai lahan yang terbatas untuk bercocok tanam guna memenuhi kebutuhan keluarga pada khususnya. Solusinya adalah berkebun pada lahan terbatas dengan metode polybag atau cara hidroponik. Informasi tentang perkembangan sistem hidroponik di Indonesia masih sangat minim, hal ini disebabkan oleh kurangnya penyuluhan tentang kelebihan sistem hidroponik pada lahan sempit. Dari sisi ekonomi cukup murah, secara teknis pembuatan media tanam hidroponik cukup mudah. Oleh sebab itu kegiatan pengabdian ini dilaksanakan sebagai langkah awal untuk mendukung warga dalam meningkatkan kehidupan masyarakat terutama ekonomi dan kesehatan melalui pelatihan, penyuluhan dan praktek tentang bertanam hidroponik dari pengolahan sampai pemasarannya. Harapan kedepan tidak saja dapat memenuhi kebutuhan keluarga tetapi juga dapat memenuhi kebutuhan pasar disekitar wilayah RT 06 & RT 07 RW05 kelurahan Arjosari serta dapat menjadi motivasi lingkungan sekitarnya untuk melaksanakan kelanjutan kegiatan positif seperti ini.
Tanaman cabai jenis cabai rawit (Capsicum Frustescens L) adalah komodidas sayuran yang banyak dibudidayakan. Salah satu kendala yang dihadapi oleh petani adalah harga yang fluktuatif dan tidak dapat bertahan lama karena memiliki karakteristik yang mudah rusak dan busuk sehingga dibutuhkan pengolahan pasca panen yang sesuai. Bubuk cabai adalah salah satu produk olahan yang berbentuk bubuk, praktis dan daya simpan yang lama. Penelitian ini bertujuan untuk mengetahui pengaruh suhu dan lama pengeringan terhadap kadar air dan kadar vitamin C pada bubuk cabai. Metode yang digunakan adalah metode pengeringan dengan variabel suhu yang digunakan yaitu 50 ℃, 55 ℃, 60 ℃, 65 ℃, dan 70 ℃ dan untuk variabel waktu yang digunakan adalah 12 jam, 24 jam, 36 jam, 48 jam dan 60 jam. Hasil penelitian menunjukkan bahwa semakin tinggi suhu dan lama pengeringan akan mempengaruhi hilangnya kadar air dan kandungan vitamin C pada cabai rawit.
Processing technology of microcellular plastic represents development of foaming conventional plastic process. The processing of microcellular plastic has been acknowledged as eco-friendly technology because this plastic is produced by the use of benign supercritical carbon dioxide gas as blowing agent. In this work, the samples polystyrene and additive were saturated with supercritical CO2 at various saturation pressures from 10-22 MPa (at around glass transition temperature of 95 oC and 80 oC) When the saturation time was accomplished, the solution was decompressed rapidly into atmospheric pressure. The samples were placed in the vessel heated and completed by flowing of carbon dioxide as cooler gas into the vessel. The samples were characterized to observe volume expansion ratio, cell density, average cell diameter and surface fractured with Scanning Electron Microscopy. The microcellular foam of plastic product of PS system has cell diameter between 3.970-9.933 μm , cell density between 9.14x104 – 6.24x109 cell/ cm3. PS-CaCO3 system has cell diameter between 3.501-8.050 μm, cell density between 3.31x107 – 1.10x1011 cell/cm3, while PS-coconut fiber system hascell diameter between 2.520-8.414 μm, cell density between 1.50x108 -1.60x1010 cell/cm3 at various pressure.Keywords: polystyrene, microcellular foam plastic, supercritical CO2, CaCO3additive, coconut fiber additive. AbstrakProses pembuatan plastik mikroseluler merupakan pengembangan dari proses pembuatan foam plastik konvensional. Plastik mikroseluler menggunakan fluida superkritis seperti CO2 dan N2 sebagai blowing agent yang ramah terhadap lingkungan, sehingga proses pembuatan foam plastik mikroseluler dikenal sebagai teknologi ramah lingkungan. Penelitian ini menggunakan sampel polistirena yang dicampur dengan partikel kalsium karbonat atau sabut kelapa dengan konsentrasi 5% yang diproses pada kondisi tekanan 10-22 MPa (T = 95 oC dan 80 oC). Setelah kondisi yang diinginkan tercapai dilakukan dekompresi secara mendadak menuju tekanan atmosfer, dan dilanjutkan dengan proses pemanasan, diakhiri dengan mengalirkan gas CO2 sebagai pendingin. Selanjutnya sampel dikarakterisasi untuk mengetahui rasio volume ekspansi foam, densitas sel, diameter rata-rata sel dan struktur foam yang dihasilkan dengan Scanning Electron Microscope. Pada penelitian ini didapatkan pada sistem PS Murni menghasilkan diameter sel antara 3,970-9,933 μm dan densitas sel 9,14x104 - 6,24x109 cell/cm3. Sistem PS-CaCO3 menghasilkan diameter sel antara 3,501-8,050 μm dan densitas sel 3,31x107 - 1,10x1011 cell/cm3, dan pada sistem PS-Sabut kelapa menghasilkan diameter sel antara 2,520-8,414 μm dan densitas sel 1,50x108 - 1,60x1010 cell/cm3 pada berbagai variasi tekanan.Kata kunci : polistirena, foam plastik mikroseluler, CO2 superkritis, aditif CaCO3, aditif sabut kelapa.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.