No abstract

Flexibility can be used to mitigate distribution network overloading. Distribution system operators (DSOs) can obtain this flexibility from market parties connected to the distribution network. After flexibility has been delivered to the DSO, it needs to be settled. This is typically done by comparing load measurements with a baseline. This baseline describes an asset’s power profile in case no flexibility would have been delivered. Until recently, baselining research mainly focused on large-scale, predictable and controllable assets. The flexibility used by DSOs however typically comes from small-scale, less predictable and less controllable assets. This paper addresses the baselining problem for photo-voltaic systems. Three existing baselining methods are selected based on their simplicity and transparency and their limitations with respect to application towards photo-voltaic systems are evaluated. Based on this, a proof-of-concept for a new, fourth method is provided. It overcomes some of the limitations of the three existing ones, while still ensuring simplicity and transparency in order to promote market acceptance and practical applicability. All four methods are subjected to two different curtailment strategies: curtailing all peaks above a threshold and curtailing based on a day-ahead flexibility request. Using weather data from three summer weeks in 2019, it is shown that the newly developed method is able to provide a more accurate baseline than the existing methods.

No abstract

DOI to the publisher's website. • The final author version and the galley proof are versions of the publication after peer review. • The final published version features the final layout of the paper including the volume, issue and page numbers. Link to publication General rights Copyright and moral rights for the publications made accessible in the public portal are retained by the authors and/or other copyright owners and it is a condition of accessing publications that users recognise and abide by the legal requirements associated with these rights. • Users may download and print one copy of any publication from the public portal for the purpose of private study or research. • You may not further distribute the material or use it for any profit-making activity or commercial gain • You may freely distribute the URL identifying the publication in the public portal. If the publication is distributed under the terms of Article 25fa of the Dutch Copyright Act, indicated by the "Taverne" license above, please follow below link for the End User Agreement:

No abstract

DOI to the publisher's website.• The final author version and the galley proof are versions of the publication after peer review.• The final published version features the final layout of the paper including the volume, issue and page numbers. Link to publication General rightsCopyright and moral rights for the publications made accessible in the public portal are retained by the authors and/or other copyright owners and it is a condition of accessing publications that users recognise and abide by the legal requirements associated with these rights.• Users may download and print one copy of any publication from the public portal for the purpose of private study or research. • You may not further distribute the material or use it for any profit-making activity or commercial gain • You may freely distribute the URL identifying the publication in the public portal.If the publication is distributed under the terms of Article 25fa of the Dutch Copyright Act, indicated by the "Taverne" license above, please follow below link for the End User Agreement:

Distribution system operators are investigating methods to facilitate a high penetration of distributed energy resources while maintaining network reliability in a cost effective way. Some of the challenges associated with a high penetration of distributed energy resources are network overloading, voltage violations, and inadequate fault protection. Mitigation measures to these challenges are investigated in a newly developed livinglab in the district of Strijp-S, Eindhoven, the Netherlands. This living-lab is home to demonstrators from two H2020 projects: In-terFlex and UNITED-GRID. The InterFlex demonstrator focuses on congestion management and voltage control through a dayahead and intraday flexibility market, while the UNITED-GRID demonstrator focuses on near real-time solutions for congestion management, voltage control, fault protection and self-healing. This paper addresses the innovative solutions which will be developed and tested in both demonstrators, in relation to the living-lab. Furthermore, an initial overview is given of a potential integrated approach to utilize both demonstrators in parallel.

No abstract