Field-effect transistors made of organic single crystals are ideal for studying the charge transport characteristics of organic semiconductor materials. Their outstanding device performance, relative to that of transistors made of organic thin films, makes them also attractive candidates for electronic applications such as active matrix displays and sensor arrays. These applications require minimal cross-talk between neighbouring devices. In the case of thin film systems, simple patterning of the active semiconductor layer minimizes cross-talk. But when using organic single crystals, the only approach currently available for creating arrays of separate devices is manual selection and placing of individual crystals-a process prohibitive for producing devices at high density and with reasonable throughput. In contrast, inorganic crystals have been grown in extended arrays, and efficient and large-area fabrication of silicon crystalline islands with high mobilities for electronic applications has been reported. Here we describe a method for effectively fabricating large arrays of single crystals of a wide range of organic semiconductor materials directly onto transistor source-drain electrodes. We find that film domains of octadecyltriethoxysilane microcontact-printed onto either clean Si/SiO(2) surfaces or flexible plastic provide control over the nucleation of vapour-grown organic single crystals. This allows us to fabricate large arrays of high-performance organic single-crystal field-effect transistors with mobilities as high as 2.4 cm(2) V(-1) s(-1) and on/off ratios greater than 10(7), and devices on flexible substrates that retain their performance after significant bending. These results suggest that our fabrication approach constitutes a promising step that might ultimately allow us to utilize high-performance organic single-crystal field-effect transistors for large-area electronics applications.
A nonvolatile plastic digital memory device based on nanofibers of the conjugated polymer polyaniline decorated with gold nanoparticles is reported. The device has a simple structure consisting of the plastic composite film sandwiched between two electrodes. An external bias is used to program the ON and OFF states of the device that are separated by a 3-orders-of-magnitude difference in conductivity. ON-OFF switching times of less than 25 ns are observed by electrical pulse measurements. The devices possess prolonged retention times of several days after they have been programmed. Write-read-erase cycles are also demonstrated. The switching mechanism is attributed to an electric-field-induced charge transfer from the polyaniline nanofibers to the gold nanoparticles. The active polymer layer is created by growing nanometer size gold particles within 30-nm-diameter polyaniline nanofibers using a redox reaction with chloroauric acid. This device combines two exciting research areas--nanoparticles and conducting polymers--to form a novel materials system with unique functionality.
Recently, films created by incorporating metallic nanoparticles into organic or polymeric materials have demonstrated electrical bistability, as well as the memory effect, when subjected to an electrical bias. Organic and polymeric digital memory devices based on this bistable electronic behavior have emerged as a viable technology in the field of organic electronics. These devices exhibit fast response speeds and can form multiple‐layer stacking structures, demonstrating that organic memory devices possess a high potential to become flexible, ultrafast, and ultrahigh‐density memory devices. This behavior is believed to be related to charge storage in the organic or polymer film, where devices are able to exhibit two different states of conductivity often separated by several orders of magnitude. By defining the two states as “1” and “0”, it is now possible to create digital memory devices with this technology. This article reviews electrically bistable devices developed in our laboratory. Our research has stimulated strong interest in this area worldwide. The research by other laboratories is reviewed as well.
Nanostructured viruses are attractive for use as templates for ordering quantum dots to make self-assembled building blocks for next-generation electronic devices. So far, only a few types of electronic devices have been fabricated from biomolecules due to the lack of charge transport through biomolecular junctions. Here, we show a novel electronic memory effect by incorporating platinum nanoparticles into tobacco mosaic virus. The memory effect is based on conductance switching, which leads to the occurrence of bistable states with an on/off ratio larger than three orders of magnitude. The mechanism of this process is attributed to charge trapping in the nanoparticles for data storage and a tunnelling process in the high conductance state. Such hybrid bio-inorganic nanostructures show promise for applications in future nanoelectronics.
Flexible and conformable organic single crystals as thin as 150 nm are used for fabricating mechanically bendable organic single‐crystal field‐effect transistors on low‐cost plastic substrates (see figure and cover). We report effective field‐effect mobility as high as 4.6 cm2 V–1 s–1 for a flexible rubrene single‐crystal transistor, on/off ratio of ca. 106, threshold voltage of – 2.1 V, and a normalized subthreshold swing of 0.9 V nF decade–1 cm–2.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.