Summary 1. We investigated the numerical response, functional response and prey preference of Asplanchna sieboldi to five different prey brachionids. We also analysed the feeding behaviour of the predator in terms of encounters, attacks, capture and prey ingested per unit time. 2. The five prey species (Brachionus havanaensis, B. rubens, B. patulus, B. macracanthus and B. calyciflorus) differed in their body size and spine length. 3. The population growth rates of A. sieboldi ranged from 0.074 ± 0.03 to 0.431 ± 0.02 depending on prey type and density. There was a significant impact of the spine length rather than body size per se on the population growth rates of the predator. 4. The maximum number of prey consumed depended on both body size and spine length. In the functional response analyses, the plateau was reached at a prey density of 4–8 ind. mL−1. 5. There was a significant impact of prey density on the prey preference of the predator.

Natural keratin fibres derived from Mexican tannery waste and coconut fibres from coconut processing waste were used as fillers in commercially available, biodegradable thermoplastic starch-polyester blend to obtain sustainable biocomposites. The morphology, rheological and mechanical properties as well as pyrolysis, flammability and forced flaming combustion behaviour of those biocomposites were investigated. In order to open up new application areas for these kinds of biocomposites, ammonium polyphosphate (APP) was added as a flame retardant. Extensive flammability and cone calorimeter studies revealed a good flame retardance effect with natural fibres alone and improved effectiveness with the addition of APP. In fact, it was shown that replacing 20 of 30 wt. % of APP with keratin fibres achieved the same effectiveness. In the case of coconut fibres, a synergistic effect led to an even lower heat release rate and total heat evolved due to reinforced char residue. This was confirmed via scanning electron microscopy of the char structure. All in all, these results constitute a good approach towards sustainable and biodegradable fibre reinforced biocomposites with improved flame retardant properties.

The high flame-retardant loading required for ethylene-vinyl acetate copolymer blends with polyethylene (EVA-PE) employed for insulation and sheathing of electric cables represents a significant limitation in processability and final mechanical properties. In this work, melamine triazine (TRZ) and modified bentonite clay have been investigated in combination with aluminum trihydroxide (ATH) for the production of EVA-PE composites with excellent fire safety and improved mechanical properties. Optimized formulations with only 120 parts per hundred resin (phr) of ATH can achieve self-extinguishing behavior according to the UL94 classification (V0 rating), as well as reduced combustion kinetics and smoke production. Mechanical property evaluation shows reduced stiffness and improved elongation at break with respect to commonly employed EVA-PE/ATH composites. The reduction in filler content also provides improved processability and cost reductions. The results presented here allow for a viable and halogen-free strategy for the preparation of high performing EVA-PE composites.

No abstract

No abstract