Pada awalnya, LED hanya untuk peralatan elektronik. Namun, seiring berjalannya waktu LED menjadi pilihan utama lampu otomotif masa depan karena bentuknya yang kecil, konsumsi dayanya yang rendah dan radiasi panas yang rendah. Terkait regulasi pemerintah yang mewajibkan penggunaan lampu siang hari untuk kendaraan roda dua, maka teknologi pencahayaan lampu LED sangat tepat mengingat beban lampu yang tinggi perlu konsumsi daya yang rendah. Terbukti sekarang pabrikan maupun suku cadang non-pabrikan mulai menggeliat dalam memproduksi lampu LED untuk otomotif karena prospek yang tinggi.Teknologi ini telah diterapkan pada kendaraan bermotor maupun mobil keluaran terbaru. Regulasi yang memungkinkan pada siang hari menggunakan lampu (DRL/Daily Running Light) sebagai syarat keamanan diawali dari Eropa dan Amerika untuk kendaraan roda empat dan sekarang di Indonesia wajib menyalakan lampu pada siang hari untuk kendaraan roda dua. Kondisi seperti ini sangat prospektif bagi pelaku industri otomotif untuk menggunakan teknologi terbaru lampu LED dan meninggalkan penggunaan lampu Halogen maupun HID (High Intensity Discharge) yang kurang efisien karena konsumsi daya dan radiasi panas yang tinggi serta masa atau ketahanan lampu yang rendah dan tidak ramah lingkungan.Metode yang digunakan dalam jurnal ilmiah ini adalah pengujian intensitas cahaya dengan menggunakan contoh pembanding antara motor pabrikan yang menggunakan lampu LED dan non LED, serta survei dan pengambilan data ke bengkel sepeda motor.Keuntungan dari pemakaian LED sebagai lampu utama adalah konsumsi daya yang rendah tetapi intensitas yang tinggi dibandingkan dengan halogen yang mengeluarkan daya yang tinggi tetapi kuat intensitas cahaya rendah, jika dibandingkan HID meski intensitas cahaya hampir sama tetapi panas lampu yang ditimbulkan cukup tinggi. LED juga memperpanjang usia pakai komponen elektrik aki (accumulator), alternator, serta konsumsi bahan bakar yang lebih irit. Harga pasaran lampu LED untuk komponen pengganti lampu halogen masih tinggi, tetapi sebanding dengan kualitas pencahayaan dan pengaruh positif terhadap komponen lainnya.
Bending is one of the causes of signal transmission loss through the electromagnetic wave medium in the optical fiber. There are two types of bending lossess: microbending and macrobending. Both of them occur when the surface of the optical fiber cable experiences external pressure which causes deformation in the core of the optical fiber. Bending causes the loss of the optical transmission power affected by decreased light intensity, therefore the output ratio becomes degraded to the input one. This kind of condition assumed can be utilized for designing the optical fiber-based sensor by observing the response of the optical fiber against the external disturbances or stimulation. One example is the mechanical force that causes the deformation to the optical fiber. Based on the simulation result through the Matlab programming for macrobending loss, it was obtained that the highest power loss at 1.817 × 10 -4 dB/mm on the 10 mm bending radius for the 1650 nm wavelength, and the lowest at 2.683 × 10 -8 dB/mm on the 20 mm bending radius for the 1250 nm wavelength. Meanwhile for microbending loss, it obtained the largest change of transmission coefficient at 59.070% for 100 mm spacer length with applied mechanical force as large as 10 6 dynes or 10 N, and the smallest change at 0.591% for 10 mm spacer length with applied mechanical force as large as 10 5 dynes or 1 N. These significant changes of the measured values show that the optical fiber, by simulation, is pretty responsive against the external stimulations, either on the macroscopic scale or the microscopic scale. So that based on its responsiveness, we can assume that optical fiber is most likely possible to be utilized in various modern fiber optic sensor for many applied technologies.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.