The aim of this research was to evaluate the influence of microstructure on hydrogen permeation of weld and API X52 base metal under cathodic protection. The microstructures analyzed were of the API X52, as received, quenched, and annealed, and the welded zone. The test was performed in base metal (BM), quenched base metal (QBM), annealed base metal (ABM), and weld metal (WM). Hydrogen permeation flows were evaluated using electrochemical tests in a Devanathan cell. The potentiodynamic polarization curves were carried out to evaluate the corrosion resistance of each microstructure. All tests were carried out in synthetic soil solutions NS4 and NS4 + sodium thiosulfate at 25 ∘ C. The sodium thiosulfate was used to simulate sulfate reduction bacteria (SRB). Through polarization, assays established that the microstructure does not influence the corrosion resistance. The permeation tests showed that weld metal had lower hydrogen flow than base metal as received, quenched, and annealed.
A novel method to classify the aggressiveness of soil considering its physicochemical content and the development of new synthetic solutions for lab uses is proposed. The results showed that the main criteria existing in the literature for soil corrosivity classification might cause misunderstandings about the real aggressiveness. The synthetic solutions proposed aim to cover a wide range of soil found worldwide in order to refine the assessment of their characteristics hence their corrosivity. For the lab experiments, an API 5L X65 pipeline carbon steel was used. The solutions presented great reliability, and they seemed to be adequate to simulate soils with the presence of sulfate-reducing bacteria (SRB), chloride, and high pH.
Pure titanium and various alloys, such as Ti-6Al-4V, are widely used as biomaterials. In this application, surface finish conditions, topography, and surface reactivity determine excellent cellular adhesion and osseointegration characteristics. The study evaluated the influence of four surface finishing treatments (sanding #120, 600, 1200, and polished with 3 µm alumina paste) and three shapes (concave, convex, and flat) on the corrosion resistance of Ti-6Al-4V at 37 °C in simulated body fluid (SBF) through potentiodynamic polarization and electrochemical impedance spectroscopy. The SBF's ionic composition allowed the formation of a stable passive layer with a low presence of pores on the surface. In addition, the combination of polished surface and convex shape showed the best electrochemical passive behavior.
Austenitic stainless steels, specified as ASTM F138, ASTM F1586, and ASTM F2581, underwent a comparative study, including the analyses of microstructure, crystalline phases, and Vickers microhardness. The corrosion resistance was investigated by anodic polarization curves and electrochemical impedance spectroscopy using the 0.9% NaCl solution and simulated body fluid (SBF). All samples exhibited only the austenite phase and the Vickers microhardness was influenced by high nitrogen content addition. Independent on the electrolytic solution type, the ASTM F1586 and ASTM F2581 steels had better corrosive resistance performance from the anodic polarization results. However, ASTM F2581 steel presented the passive film with better protective capacity in the saline solution while ASTM F1586 had better performance in the SBF.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.