This paper presents an experimental study of geopolymer material as an alternative material for grouting. The samples were class F Fly ash as raw materials, activated with 6M, 8M, and 10 M concentration of sodium hydroxide (NaOH) and sodium silicate (Na2SiO3). Superplasticizer from naphtelenesulphonatedand polycarboxylic ether hyper plasticizer in the range of 0-3% were added to improve its workability. Some test methods are conducted to the samples to know the fresh and hardened-state properties of geopolymer mixture.The experimental results showed that the longest initial and final setting time were about 13 minutes and 20 minutes, respectively at the lowest alkali concentration mixtures. The flowability of geopolymer paste and geopolymer mortar were 154% with flow table test. However, mixtures with the highest alkali concentration showed highest compressive strength of 104,5 MPa and 71 MPa for pasteand mortar respectively.
Data digital mengenai penyerahan PSU (e-PSU) yang dapat diakses dengan mudah oleh masyarakat menjadi krusial. Sehingga masyarakat yang hendak melakukan pembelian rumah di perumahan teredukasi dan dapat memilih perumahan yang telah menyerahkap PSU guna memperoleh jaminan keberlangsungan lingkungan perumahan yang akan ditinggali. Untuk mencapai tujuan tersebut, diperlukan langkah awal pengenalan metode SIG terhadap pelaku penertib kebijakan yaitu pegawai pada instansi yang membidangi penyerahan PSU yaitu Dinas Perumahan dan Kawasan Permukiman. Instansi tersebut berhasil melakukan simulasi SIG dari beberapa kumpulan atribut file yang isinya data-data PSU. Pengembangan project file kini dikembangkan secara mandiri dan rencana pembuatan baru di project file lainnya
ABSTRAKBeton dan mortar banyak digunakan sebagai bahan konstruksi di seluruh dunia. Meningkatnya permintaan beton dan mortar juga meningkatkan permintaan semen di pasar yang berdampak negatif bagi lingkungan. Industri semen menghasilkan sekitar 6 hingga 7 persen dari seluruh CO2 di seluruh dunia. Oleh karena itu, para peneliti mencoba mengembangkan gagasan tentangbeton ramah lingkungan, dengan mengurangi penggunaan semen dengan menggunakan bahan alternatif seperti silica fume. Silica fume adalah bahan pozzolan yang kaya akan silika dan dapat bereaksi kimia dengan kalsium hidroksida, membentuk gel kalsium silikat (CSH) pada beton. Tujuan dari penelitian ini adalah untuk menyelidiki pengaruh silica fume sebagai pengganti parsial semen terhadap nilai resapan dan kekuatan tekan mortar. Persentase silica fume bervariasi 0%, 5%, 10%, 12% dan 15%. Hasil pengujian menunjukkan nilai resapan minimum adalah 3,276% diperoleh campuran dengan 15% silica fume dan kuat tekan maksimum 312,574 kg/cm2 diperoleh campuran dengan 8% silica fume.Kata kunci: silica fume, nilai resapan, kuat tekan, mortar ABSTRACTConcrete and mortar are widely used as contruction materials. The increasing demand of concrete and mortar also increase the demand of cement in the market which has negative impact for environment. The cement industry produced for approximately 6 to 7 percent of all CO2 worldwide. Therefore, the researches try to develop the idea of green concrete with reducing the utilize of cement with using the alternative materials such as silica fume. Silica fume is a pozzolanic material that contain rich of silica and has chemical reaction with calcium hydroxide forming calcium silicate hydrate (C-S-H) gel in concrete.The aimed of this research is to investigate the influence of silica fume as partial replacement of cement on absoption and compressive strength of mortar.The percentage of silica fume were varied from 0%, 5%, 10%, 12% and 15%. The test result showed that the minimum absorption value is 3.276% obtain from the mixture with 15% of silica fume and the maximum compressive strength is 312.574 kg/cm2 obtain from the mixture with 8% of silica fume.Keywords: Silica fume, absorption, compressive strength, mortar
This paper presents the alternative design of Gunawangsa Gresik Apartment using Earthquake Resistance Steel Structure. The existing structure of Gunawangsa Gresik is concrete. Steel structure is being considered as the alternative design because steel material has better ductility and lower weight than concrete which is good for earthquake resistant buildings.Gunawangsa Apartement would be designed with moment resisting frames structure system in accordance with the provisions of SNI 1726:2012 concerning earthquake-resistant structure planning and SNI 1729:2015 concerning the building steel structures..From the results of the design, the steel cross-section profile dimensions used as beams are WF 400.200, WF 350.175, WF 300.150, WF 250.125, WF 200.100, and WF 175.90. Whereas for cross-section profiles are King cross K800.300, K700.300, K588.300, K600.200, and K500.200. Furthermore, in the substructure/lower structure, the foundation were designed with 8 meters deep, and diameter of 60 cm. AbstrakArtikel ini membahas tentang desain alternatif Apartemen Gunawangsa Gresik menggunakan struktur baja tahan gempa. Desain eksisting Apartemen Gunawangsa Gresik berupa struktur beton. Struktur baja dipertimbangkan sebagai alternatif desain karena material baja memiliki daktilitas yang lebih baik dan bobot yang lebih rendah daripada beton, dimana hal tersebut baik untuk bangunan tahan gempa.Apartemen Gunawangsa akan dirancang dengan sistem struktur rangka penahan momen sesuai dengan ketentuan SNI 1726: 2012 tentang perencanaan struktur tahan gempa dan SNI 1729: 2015 tentang struktur baja bangunan.Dari hasil desain, dimensi profil penampang baja yang digunakan sebagai balok adalah WF 400.200, WF 350.175, WF 300.150, WF 250.125, WF 200.100, dan WF 175.90. Sedangkan untuk profil penampang adalah King cross K800.300, K700.300, K588.300, K600.200, dan K500.200. Selanjutnya, pada substruktur / struktur bawah, pondasi dirancang dengan kedalaman 8 meter, dan diameter 60 cm.
Indonesia merupakan salah satu negara rawan gempa di dunia. Untuk mengurangi dampak akibat gempa khususnya jatuhnya korban jiwa akibat keruntuhan bangunan, maka dalam perencanaan struktur gedung di daerah rawan gempa, perilaku atau kinerja gedung terhadap gempa merupakan salah satu hal terpenting untuk diperhatikan. Oleh karena itu, perhitungan analisa secara inelastik atau nonlinier harus dilakukan. Beberapa metode untuk perhitungan analisis nonlinier meliputi analisis beban dorong (static nonlinear pushover analysis) dan analisis riwayat waktu (inelastic dynamic time history analysis). Penelitian ini membandingkan hasil kinerja dari analisis beban dorong dan analisis riwayat waktu dengan menggunakan rekaman gempa San Fernando, Morgan Hill dan Kobe untuk gedung beton bertulang SRPMK 6 lantai. Dari hasil analisis beban dorong maupun analisis riwayat waktu, didapatkan tingkat kinerja yang sama yaitu kategori IO ( Immediate Occupancy ) baik untuk arah X dan Y. Target displacement yang didapat dari analisa beban dorong sebesar 0,092 m untuk arah X dan 0,096 m untuk arah Y. Sedangkan displacement maksimum yang didapat dari hasil analisa riwayat waktu adalah sebesar 0,0129 m untuk arah X dan 0,005 m untuk arah Y yang berasal dari rekaman gempa Kobe dan gempa San Fernando.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.