The food industry has recognized the important role that multi-layered, flexible packaging materials play and it uses them extensively within the packaging processes. Trends within food processing and packaging continuously encourage manufacturers to develop new technologies which extend a product’s shelf-life. The samples that were the subject of research described in this paper are retort stand-up pouches made of multi-layered flexible material, the layers of which have been bonded with a laminating process that aims to both extend a product’s shelf-life and stability, permitting the final processing of the finished product under aggressive regimes. It is intended that packaging, when subjected to graphic reproduction and high pressure processing, shall remain unchanged in all aspects, in particular the visual aspect that is the subject of the research. The samples were printed on polyester film (PET) using a rotogravure printing technique and laminated on aluminum (Al), oriented polyamide (OPA) and finally on inner polypropylene (PP) layers. The sample was monitored for the Vegeta Blue spot colorimetric difference in the CIE L*a*b* space throughout the individual graphic reproduction phases and the final high pressure processing (HPP) of the finished product. The goal is to determine the size of the spot color colorimetric difference (Δ????????∗) in relation to the defined formula and the established standard. On the basis of measured results, guidelines and recommendations for the correction and quality assessment of spot color reproduction throughout the entire process were defined, with the goal to minimize any deviation to the lowest possible level.
The main goal of the packaging production process is to ensure quality reproduction of color and design in general, so that the quality of the final product meets all requirements necessary for food packaging. Colors are one of the key components of brand recognition and the creation of an emotional connection with consumers which is the basis of this paper. Aside from conventional packaging materials, more and more food products are marketed in multi-layered flexible packaging. The samples that form the basis of this paper are printed on polyester film (PET) using a rotogravure printing technique. During the finishing phase, the PET layer are laminated on layer of aluminium (Al), oriented polyamide (OPA) and polypropylene (PP) and then, after cross linking, they are die-cut and formed into stand-up pouch. During the graphic reproduction, graphic preparation, printing and finishing processes, colors show various deviations. The main goal of this paper is to examine the influence of the individual phases of these processes on the manner in which red spot color reacts to and determines deviations (ΔE *) in relation to a defined formula and color standard. Color deviations may also occur during the finishing and sterilisation process. In order that colorimetric spot colors may be monitored, it is necessary to define a formula and standard and conduct measuring after each stage of the graphical process in the CIE L*a*b* color space. Based on the measured results, guidelines and recommendations were produced for the correction and control of color reproduction throughout the defined process which aim to reduce deviation to an acceptable level.
Opaque white ink is highly important when printing on transparent substrates. The purpose of the white ink is to completely or partially cover the content of the packaging as well as to ensure the printing of other colors over it according to the appropriate printing specifications. The main goal of this study was to research the impact of anilox roller volume of opaque white on its opacity, and, consequently, on opacity, as well as the CIELAB values of colors that are printed over it. The research was conducted in three printing stages, during which the volume of the anilox roller was increased in linear steps of 3 cm3/m2 while other parameters remained constant. The analysis of white ink covering properties was carried out on microscopic print images using ImageJ software. The results showed that a linear increase in the anilox roller volume resulted in an exponential change in white ink opacity as well as the opacity of color samples. It was also determined that a volume increase of 6 cm3/m2 was required to visually notice color difference. Namely, medium lightness colors more strongly reacted to changes in white ink opacity compared to light and dark colors.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.