We generate arbitrary convex accelerating beams by direct application of an appropriate spatial phase profile on an incident Gaussian beam. The spatial phase calculation exploits the geometrical properties of optical caustics and the Legendre transform. Using this technique, accelerating sheet caustic beams with parabolic profiles (i.e. Airy beams), as well as quartic and logarithmic profiles are experimentally synthesized from an incident Gaussian beam, and we show compatibility with material processing applications using an imaging system to reduce the main intensity lobe at the caustic to sub-10 micron transverse dimension. By applying additional and rotational spatial phase, we generate caustic-bounded sheet and volume beams, which both show evidence of the recently predicted effect of abrupt autofocussing. In addition, an engineered accelerating profile with femtosecond pulses is applied to generate a curved zone of refractive index modification in glass. These latter results provide proof of principle demonstration of how this technique may yield new degrees of freedom in both nonlinear optics and femtosecond micromachining.
We use caustic beam shaping on 100 fs pulses to experimentally generate nonparaxial accelerating beams along a 60° circular arc, moving laterally by 14 µm over a 28 µm propagation length. This is the highest degree of transverse acceleration reported to our knowledge. Using diffraction integral theory and numerical beam propagation simulations, we show that circular acceleration trajectories represent a unique class of nonparaxial diffraction-free beam profile which also preserves the femtosecond temporal structure in the vicinity of the caustic.
An open challenge in the important field of femtosecond laser material processing is the controlled internal structuring of dielectric materials. Although the availability of high energy high repetition rate femtosecond lasers has led to many advances in this field, writing structures within transparent dielectrics at intensities exceeding 1013 W/cm2 has remained difficult as it is associated with significant nonlinear spatial distortion. This letter reports the existence of a new propagation regime for femtosecond pulses at high power that overcomes this challenge, associated with the generation of a hollow uniform and intense light tube that remains propagation invariant even at intensities associated with dense plasma formation. This regime is seeded from higher order nondiffracting Bessel beams, which carry an optical vortex charge. Numerical simulations are quantitatively confirmed by experiments where a novel experimental approach allows direct imaging of the 3D fluence distribution within transparent solids. We also analyze the transitions to other propagation regimes in near and far fields. We demonstrate how the generation of plasma in this tubular geometry can lead to applications in ultrafast laser material processing in terms of single shot index writing, and discuss how it opens important perspectives for material compression and filamentation guiding in atmosphere.
Femtosecond pulses provide an extreme degree of confinement of light matter-interactions in high-bandgap materials because of the nonlinear nature of ionization. It was recognized very early on that a highly focused single pulse of only nanojoule energy could generate spherical voids in fused silica and sapphire crystal as the nanometric scale plasma generated has energy sufficient to compress the material around it and to generate new material phases. But the volumes of the nanometric void and of the compressed material are extremely small. Here we use single femtosecond pulses shaped into high-angle Bessel beams at microjoule energy, allowing for the creation of very high 100:1 aspect ratio voids in sapphire crystal, which is one of the hardest materials, twice as dense as glass. The void volume is 2 orders of magnitude higher than those created with Gaussian beams. Femtosecond and picosecond illumination regimes yield qualitatively different damage morphologies. These results open novel perspectives for laser processing and new materials synthesis by laser-induced compression.
Ultrafast lasers have revolutionized material processing, opening a wealth of new applications in many areas of science. A recent technology that allows the cleaving of transparent materials via non-ablative processes is based on focusing and translating a high-intensity laser beam within a material to induce a well-defined internal stress plane. This then enables material separation without debris generation. Here, we use a non-diffracting beam engineered to have a transverse elliptical spatial profile to generate high-aspect-ratio elliptical channels in glass of a dimension 350 nm×710 nm and subsequent cleaved surface uniformity at the sub-micron level.
The polarization process when polarizers act on an optical field is studied.
We give examples for two kinds of polarizers. The first kind presents an
anisotropic absorption - as in a polaroid film - and the second one is based on
total reflection at the interface with a birefringent medium. Using the Stokes
vector representation, we determine explicitly the trajectories of the wave
light polarization during the polarization process. We find that such
trajectories are not always geodesics of the Poincar\'e sphere as it is usually
thought. Using the analogy between light polarization and special relativity,
we find that the action of successive polarizers on the light wave polarization
is equivalent to the action of a single resulting polarizer followed by a
rotation achieved for example by a device with optical activity. We find a
composition law for polarizers similar to the composition law for noncollinear
velocities in special relativity. We define an angle equivalent to the
relativistic Wigner angle which can be used to quantify the quality of two
composed polarizers.Comment: 23 pages, 9 figures, accepted for publication in Physical Review
We develop a novel concept for ultra-high speed cleaving of crystalline materials with femtosecond lasers. Using Bessel beams in single shot, fracture planes can be induced nearly all along the Bessel zone in sapphire. For the first time, we show that only for a pulse duration below 650 fs, a single fracture can be induced in sapphire, while above this duration, cracks appear in all crystallographic orientations. We determine the influential parameters which are polarization direction, crystallographic axes and scanning direction. This is applied to cleave sapphire with a spacing as high as 25 μm between laser impacts.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.