No abstract

The use of propellant to maintain the relative orientation of multiple spacecraft in a sparse aperture telescope such as NASA's Terrestrial Planet Finder (TPF) poses several issues. These include fuel depletion, optical contamination, plume impingement, thermal emission, and vibration excitation. An alternative is to eliminate the need for propellant, except for orbit transfer, and replace it with electromagnetic control. Relative separation, relative attitude, and inertial rotation of the array can all be controlled by creating electromagnetic dipoles on each spacecraft, in concert with reaction wheels, and varying their strengths and orientations. Whereas this does not require the existence of any naturally occurring magnetic fields, such as the Earth's, such fields can be exploited. Optimized designs are discussed for a generic system and a feasible design is shown to exist for a five-spacecraft, 75-m baseline TPF interferometer. NomenclatureA c = conductor cross-sectional area a = coil radius c = conductor current density c 0 = constant defined in Eq. (8) i = current J = mission efficiency metric l c = conductor length m coil = electromagnetic coil mass m em = electromagnetic mass m sa = solar array mass m sys = total system mass m tot = total spacecraft mass m 0 = core bus and payload mass n = number of coil turns P = power P w = solar array specific power p c = conductor resistivity R = resistance r = conductor radius s = array baselinë x = spacecraft acceleration γ = mass fraction of total electromagnetic mass η = amp turns µ 0 = permeability of free space ρ = coil density = relative mission efficiency ω = rotation rate

No abstract

No abstract

No abstract

No abstract

The Resonant Inductive Near-Field Generation System uses a single set of hardware to perform both electromagnetic formation flight and wireless power transfer operations in a six-degree-of-freedom microgravity environment. The system serves primarily as a test bed for control algorithms, and operation onboard the International Space Station allows for more complicated and realistic algorithms to be tested. This offers an advantage compared with the restrictive, dynamic environment of flat floor facilities on the ground or the limited duration of reduced-gravity flights. The hardware attaches to the formation flight-test facility inside the International Space Station referred to as the Synchronized Position Hold, Engage, Reorient, Experimental Satellites. Design and development of the support hardware and electronics, as well as some test results from ground testing, a parabolic flight campaign, and preliminary test sessions on the International Space Station are presented. Ground tests and the parabolic flight campaign results include preliminary inertia and thruster characterization of the combined Resonant Inductive Near-field Generation System/Synchronized Position Hold, Engage, Reorient, Experimental Satellites assembly. Preliminary on-orbit test results include data demonstrating wireless power transfer of approximately 30% and qualitative observations of electromagnetic formation flight with one Resonant Inductive Near-Field Generation System unit restrained and the other unit free floating.

No abstract