The purpose of this paper is to study high voltage interactions in polymer thick film resistors, namely, polyvinyl chloride- (PVC-) graphite thick film resistors, and their applications in universal trimming of these resistors. High voltages in the form of impulses for various pulse durations and with different amplitudes have been applied to polymer thick film resistors and we observed the variation of resistance of these resistors with high voltages. It has been found that the resistance of polymer thick film resistors decreases in the case of higher resistivity materials and the resistance of polymer thick film resistor increases in the case of lower resistivity materials when high voltage impulses are applied to them. It has been also found that multiple high voltage pulse (MHVP) stressing can be used to trim the polymer thick film resistors either upwards or downwards.

Purpose -The purpose of this paper is to study high-voltage interactions in polymer thick-film resistors, namely, polyvinyl chloride (PVC)-graphite thick-film resistors, and their applications in universal trimming of these resistors. Design/methodology/approach -The authors applied high voltages in the form of pulses and impulses of various pulse durations and with different amplitudes to polymer thick-film resistors and observed the variation of resistance of these resistors with high voltages. Findings -The paper finds that high voltages can be used for trimming of polymer thick-film resistors in both directions, i.e. upwards and downwards.Research limitations/implications -The research implication of this paper is that polymer thick-film resistors can be trimmed downwards or upwards practically using this method. Practical implications -The practical implications of this paper is that one can trim the polymer thick-film resistors, namely, PVC-graphite thick-film resistors, in both directions, i.e. upwards and downwards, by using this method. Originality/value -The value of the paper is in showing that high voltages can be used to trim downwards and also upwards in the case of polymer thick-film resistors. This type of trimming is called universal trimming, developed first time for polymer thick-film resistors.

No abstract

The percentage variation of resistance of PVC-graphite thick film resistors has been studied. Two different grain sizes of graphite, as well as four different compositions of PVC- graphite are adopted in the preparation of thick film resistors. Among the four different compositions of PVC-graphite i.e. 90%:10% to 60%:40%, 90%:10% PVC-graphite composite thick film resistor shows the least variation with temperature changes. This can be attributed to high composition of graphite. The variation will be lowered down with a decrease in the loading fraction of PVC in thick film resistors. The percentage variations of resistance of PVC-graphite thick film resistors, after 700C for 1000 hours, or after 30 cycles thermal shock tests as well as the variations after the short term overload tests, have been measured and studied. A possible explanation on these experiments is also presented.

No abstract